RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Georgia >> Pike County >> Meansville >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Georgia

The Commemorative Quarter for Georgia





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Meansville (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Meansville. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the southeast corner of their home county. During their lives, most hospitals were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the south.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the east contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Meansville is located in Pike County.

To see how the shape of Georgia's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Pike County: Lamar, Meriwether, Spalding & Upson.

Below are the counties that are near Meansville. For each of these counties, we show a sample of those communities that are closest to Meansville:

  • Pike County     (The home county of Meansville)
    • The following are listed by their distance from Meansville, with the one closest to Meansville listed first.
    • Zebulon
      (4 miles [6.4 km] to the northwest)
    • Hilltop
      (8 miles [12.9 km] to the northwest)
      • Note: The GPS coordinates that we are using for Hilltop have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hilltop
      • Hilltop is located in Pike County
    • Concord
      (8 miles [12.9 km] to the west)
    • Williamson
      (9 miles [14.5 km] to the north)
      • Note: The GPS coordinates that we are using for Williamson have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Williamson
      • Williamson is located in Pike County
      • Population from the 2020 Census: 521 people
      • Jump to TripAdvisor's Tourism page for Williamson <1>
    • Molena
      (11 miles [17.7 km] to the west)
      • Note: The GPS coordinates that we are using for Molena have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Molena
      • Molena is located in Pike County
      • Population from the 2020 Census: 399 people
      • Jump to TripAdvisor's Tourism page for Molena <1>
    • Lawrences Mill
      (12 miles [19.3 km] to the southwest)
      • Note: The GPS coordinates that we are using for Lawrences Mill have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lawrences Mill
      • Lawrences Mill is located in Pike County
      • Estimated population in 2019: 30,834 people
  • Butts County
    • The following are listed by their distance from Meansville, with the one closest to Meansville listed first.
    • Jenkinsburg
      (24 miles [38.6 km] to the northeast)
      • Note: The GPS coordinates that we are using for Jenkinsburg have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Jenkinsburg
      • Jenkinsburg is located in Butts County
      • Population from the 2020 Census: 383 people
      • Jump to TripAdvisor's Tourism page for Jenkinsburg <1>
    • Jackson
      (25 miles [40.2 km] to the northeast)
    • Flovilla
      (27 miles [43.5 km] to the northeast)
  • Clayton County
    • The following are listed by their distance from Meansville, with the one closest to Meansville listed first.
    • Lovejoy
      (26 miles [41.8 km] to the north)
    • Bonanza
      (28 miles [45.1 km] to the north)
      • Note: The GPS coordinates that we are using for Bonanza have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bonanza
      • Bonanza is located in Clayton County
    • Irondale
      (29 miles [46.7 km] to the north)
      • Note: The GPS coordinates that we are using for Irondale have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Irondale
      • Irondale is located in Clayton County
  • Coweta County
    • The following are listed by their distance from Meansville, with the one closest to Meansville listed first.
    • Haralson
      (19 miles [30.6 km] to the northwest)
    • Senoia
      (23 miles [37 km] to the northwest)
      • Note: The GPS coordinates that we are using for Senoia have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Senoia
      • Senoia is located in Coweta County
      • Population from the 2020 Census: 4,528 people
      • Jump to TripAdvisor's Tourism page for Senoia <1>
    • Jade Lake Village
      (26 miles [41.8 km] to the northwest)
      • Note: The GPS coordinates that we are using for Jade Lake Village have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Jade Lake Village
      • Jade Lake Village is located in Coweta County
    • Turin
      (27 miles [43.5 km] to the northwest)
      • Note: The GPS coordinates that we are using for Turin have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Turin
      • Turin is located in Coweta County
      • Population from the 2020 Census: 395 people
      • Jump to TripAdvisor's Tourism page for Turin <1>
    • Bexton
      (28 miles [45.1 km] to the northwest)
      • Note: The GPS coordinates that we are using for Bexton have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bexton
      • Bexton is located in Coweta County
    • Sharpsburg
      (28 miles [45.1 km] to the northwest)
      • Note: The GPS coordinates that we are using for Sharpsburg have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sharpsburg
      • Sharpsburg is located in Coweta County
      • Population from the 2020 Census: 357 people
      • Jump to TripAdvisor's Tourism page for Sharpsburg <1>
    • Smith City
      (30 miles [48.3 km] to the northwest)
      • Note: The GPS coordinates that we are using for Smith City have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Smith City
      • Smith City is located in Coweta County
  • Crawford County
    • The following are listed by their distance from Meansville, with the one closest to Meansville listed first.
    • Musella
      (23 miles [37 km] to the southeast)
      • Note: The GPS coordinates that we are using for Musella have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Musella
      • Musella is located in Crawford County
      • Jump to TripAdvisor's Tourism page for Musella <1>
    • Knoxville
      (28 miles [45.1 km] to the southeast)
      • Note: The GPS coordinates that we are using for Knoxville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Knoxville
      • Knoxville is located in Crawford County
      • Jump to TripAdvisor's Tourism page for Knoxville <1>
    • Roberta
      (28 miles [45.1 km] to the southeast)
      • Note: The GPS coordinates that we are using for Roberta have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Roberta
      • Roberta is located in Crawford County
      • Population from the 2020 Census: 950 people
      • Jump to TripAdvisor's Tourism page for Roberta <1>
  • Fayette County
    • The following are listed by their distance from Meansville, with the one closest to Meansville listed first.
    • Brooks
      (18 miles [29 km] to the northwest)
    • Woolsey Woods
      (21 miles [33.8 km] to the north)
      • Jump to our Gazetteer entry for Woolsey Woods
      • Woolsey Woods is located in Fayette County
      • Estimated population in 2019: 167 people
    • Woolsey
      (22 miles [35.4 km] to the north)
      • Note: The GPS coordinates that we are using for Woolsey have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Woolsey
      • Woolsey is located in Fayette County
      • Population from the 2020 Census: 167 people
    • Inman
      (24 miles [38.6 km] to the north)
    • Foreston Place
      (24 miles [38.6 km] to the northwest)
      • Note: The GPS coordinates that we are using for Foreston Place have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Foreston Place
      • Foreston Place is located in Fayette County
      • Estimated population in 2019: 20,020 people
    • Harp
      (25 miles [40.2 km] to the north)
      • Jump to our Gazetteer entry for Harp
      • Harp is located in Fayette County
    • Keyland Woods
      (25 miles [40.2 km] to the north)
      • Note: The GPS coordinates that we are using for Keyland Woods have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Keyland Woods
      • Keyland Woods is located in Fayette County
      • Estimated population in 2019: 332 people
    • Hamptons Corner
      (25 miles [40.2 km] to the northwest)
      • Note: The GPS coordinates that we are using for Hamptons Corner have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hamptons Corner
      • Hamptons Corner is located in Fayette County
      • Estimated population in 2019: 8,073 people
    • McIntosh Village
      (26 miles [41.8 km] to the north)
      • Note: The GPS coordinates that we are using for McIntosh Village have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for McIntosh Village
      • McIntosh Village is located in Fayette County
    • Fayetteville
      (28 miles [45.1 km] to the north)
    • Blakely Woods
      (29 miles [46.7 km] to the north)
      • Note: The GPS coordinates that we are using for Blakely Woods have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Blakely Woods
      • Blakely Woods is located in Fayette County
      • Estimated population in 2019: 4,571 people
    • Peachtree City
      (29 miles [46.7 km] to the northwest)
    • Tinsley Mill Village
      (29 miles [46.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Tinsley Mill Village have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Tinsley Mill Village
      • Tinsley Mill Village is located in Fayette County
  • Harris County
    • Shiloh
      (28 miles [45.1 km] to the southwest)
  • Henry County
    • The following are listed by their distance from Meansville, with the one closest to Meansville listed first.
    • Hampton
      (23 miles [37 km] to the north)
    • Locust Grove
      (23 miles [37 km] to the northeast)
      • Note: The GPS coordinates that we are using for Locust Grove have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Locust Grove
      • Locust Grove is located in Henry County
      • Population from the 2020 Census: 9,091 people
      • Jump to TripAdvisor's Tourism page for Locust Grove <1>
    • Blacksville
      (28 miles [45.1 km] to the north)
      • Note: The GPS coordinates that we are using for Blacksville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Blacksville
      • Blacksville is located in Henry County
    • McDonough
      (28 miles [45.1 km] to the north)
      • Note: The GPS coordinates that we are using for McDonough have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for McDonough
      • McDonough is located in Henry County
      • Population from the 2020 Census: 27,582 people
      • Jump to TripAdvisor's Tourism page for McDonough <1>
  • Lamar County
    • The following are listed by their distance from Meansville, with the one closest to Meansville listed first.
    • Aldora
      (7 miles [11.3 km] to the east)
      • Note: The GPS coordinates that we are using for Aldora have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Aldora
      • Aldora is located in Lamar County
      • Population from the 2020 Census: 111 people
    • Milner
      (7 miles [11.3 km] to the northeast)
    • Barnesville
      (8 miles [12.9 km] to the east)
    • Goggins
      (12 miles [19.3 km] to the east)
      • Note: The GPS coordinates that we are using for Goggins have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Goggins
      • Goggins is located in Lamar County
      • Goggins has also been known as:
      • Goggans Station
      • Goggans
      • Goggansville
      • Goggins Station
      • Gogginsville
    • Liberty Hill
      (12 miles [19.3 km] to the northeast)
      • Jump to our Gazetteer entry for Liberty Hill
      • Liberty Hill is located in Lamar County
  • Meriwether County
    • The following are listed by their distance from Meansville, with the one closest to Meansville listed first.
    • Edman
      (14 miles [22.5 km] to the west)
      • Note: The GPS coordinates that we are using for Edman have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Edman
      • Edman is located in Meriwether County
    • Carrolls
      (15 miles [24.1 km] to the west)
      • Note: The GPS coordinates that we are using for Carrolls have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Carrolls
      • Carrolls is located in Meriwether County
      • Estimated population in 2019: 27,259 people
    • Gay
      (15 miles [24.1 km] to the west)
      • Jump to our Gazetteer entry for Gay
      • Gay is located in Meriwether County
      • Population from the 2020 Census: 82 people
      • Jump to TripAdvisor's Tourism page for Gay <1>
    • Woodbury
      (16 miles [25.7 km] to the west)
      • Note: The GPS coordinates that we are using for Woodbury have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Woodbury
      • Woodbury is located in Meriwether County
      • Population from the 2020 Census: 898 people
      • Jump to TripAdvisor's Tourism page for Woodbury <1>
    • Betts
      (17 miles [27.4 km] to the southwest)
      • Note: The GPS coordinates that we are using for Betts have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Betts
      • Betts is located in Meriwether County
      • Estimated population in 2019: 373 people
    • Chalybeate Springs
      (20 miles [32.2 km] to the southwest)
      • Note: The GPS coordinates that we are using for Chalybeate Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Chalybeate Springs
      • Chalybeate Springs is located in Meriwether County
    • Manchester
      (22 miles [35.4 km] to the southwest)
    • Rocky Mount
      (22 miles [35.4 km] to the west)
      • Jump to our Gazetteer entry for Rocky Mount
      • Rocky Mount is located in Meriwether County
    • Greenville
      (23 miles [37 km] to the west)
    • Warm Springs
      (24 miles [38.6 km] to the southwest)
    • Harris City
      (24 miles [38.6 km] to the west)
      • Note: The GPS coordinates that we are using for Harris City have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Harris City
      • Harris City is located in Meriwether County
    • Luthersville
      (27 miles [43.5 km] to the northwest)
      • Note: The GPS coordinates that we are using for Luthersville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Luthersville
      • Luthersville is located in Meriwether County
      • Population from the 2020 Census: 831 people
      • Jump to TripAdvisor's Tourism page for Luthersville <1>
    • Lone Oak
      (30 miles [48.3 km] to the west)
      • Jump to our Gazetteer entry for Lone Oak
      • Lone Oak is located in Meriwether County
      • Population from the 2020 Census: 89 people
  • Monroe County
    • The following are listed by their distance from Meansville, with the one closest to Meansville listed first.
    • Culloden
      (17 miles [27.4 km] to the southeast)
    • Box Ankle
      (19 miles [30.6 km] to the east)
      • Jump to our Gazetteer entry for Box Ankle
      • Box Ankle is located in Monroe County
    • Russellville
      (20 miles [32.2 km] to the southeast)
      • Note: The GPS coordinates that we are using for Russellville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Russellville
      • Russellville is located in Monroe County
    • Forsyth
      (21 miles [33.8 km] to the east)
    • Smarr
      (24 miles [38.6 km] to the east)
      • Note: The GPS coordinates that we are using for Smarr have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Smarr
      • Smarr is located in Monroe County
      • Jump to TripAdvisor's Tourism page for Smarr <1>
    • Juliette
      (29 miles [46.7 km] to the east)
      • Note: The GPS coordinates that we are using for Juliette have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Juliette
      • Juliette is located in Monroe County
      • Estimated population in 2019: 161 people
      • Jump to TripAdvisor's Tourism page for Juliette <1>
    • Bolingbroke
      (30 miles [48.3 km] to the east)
  • Spalding County
    • The following are listed by their distance from Meansville, with the one closest to Meansville listed first.
    • Orchard Hill
      (10 miles [16.1 km] to the northeast)
      • Note: The GPS coordinates that we are using for Orchard Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Orchard Hill
      • Orchard Hill is located in Spalding County
      • Population from the 2020 Census: 237 people
      • Jump to TripAdvisor's Tourism page for Orchard Hill <1>
    • Griffin
      (13 miles [20.9 km] to the north)
    • East Griffin
      (14 miles [22.5 km] to the north)
      • Note: The GPS coordinates that we are using for East Griffin have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for East Griffin
      • East Griffin is located in Spalding County
    • Experiment
      (15 miles [24.1 km] to the north)
    • Sunny Side
      (20 miles [32.2 km] to the north)
      • Note: The GPS coordinates that we are using for Sunny Side have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sunny Side
      • Sunny Side is located in Spalding County
      • Population from the 2020 Census: 139 people
      • Jump to TripAdvisor's Tourism page for Sunny Side <1>
  • Talbot County
    • The following are listed by their distance from Meansville, with the one closest to Meansville listed first.
    • Prattsburg
      (23 miles [37 km] to the south)
      • Note: The GPS coordinates that we are using for Prattsburg have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Prattsburg
      • Prattsburg is located in Talbot County
    • Woodland
      (23 miles [37 km] to the southwest)
    • Belleview
      (24 miles [38.6 km] to the southwest)
      • Note: The GPS coordinates that we are using for Belleview have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Belleview
      • Belleview is located in Talbot County
    • Flint Hill
      (25 miles [40.2 km] to the southwest)
      • Note: The GPS coordinates that we are using for Flint Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Flint Hill
      • Flint Hill is located in Talbot County
    • Talbotton
      (29 miles [46.7 km] to the southwest)
      • Note: The GPS coordinates that we are using for Talbotton have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Talbotton
      • Talbotton is located in Talbot County
      • Population from the 2020 Census: 838 people
      • Jump to TripAdvisor's Tourism page for Talbotton <1>
  • Taylor County
    • The following are listed by their distance from Meansville, with the one closest to Meansville listed first.
    • Carsonville
      (23 miles [37 km] to the south)
      • Jump to our Gazetteer entry for Carsonville
      • Carsonville is located in Taylor County
    • Five Points
      (24 miles [38.6 km] to the south)
      • Jump to our Gazetteer entry for Five Points
      • Five Points is located in Taylor County
  • Upson County
    • The following are listed by their distance from Meansville, with the one closest to Meansville listed first.
    • The Rock
      (7 miles [11.3 km] to the southeast)
      • Note: The GPS coordinates that we are using for The Rock have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for The Rock
      • The Rock is located in Upson County
      • Former name for The Rock:
      • Topeka Junction
      • Jump to TripAdvisor's Tourism page for The Rock <1>
    • Hannahs Mill
      (8 miles [12.9 km] to the south)
      • Note: The GPS coordinates that we are using for Hannahs Mill have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hannahs Mill
      • Hannahs Mill is located in Upson County
    • Thomaston
      (11 miles [17.7 km] to the south)
    • Barker Spring
      (11 miles [17.7 km] to the southwest)
      • Jump to our Gazetteer entry for Barker Spring
      • Barker Spring is located in Upson County
    • Sunset Village
      (11 miles [17.7 km] to the southwest)
      • Jump to our Gazetteer entry for Sunset Village
      • Sunset Village is located in Upson County
    • Lincoln Park
      (12 miles [19.3 km] to the south)
      • Note: The GPS coordinates that we are using for Lincoln Park have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lincoln Park
      • Lincoln Park is located in Upson County
      • Estimated population in 2019: 1,503 people
    • Yatesville
      (13 miles [20.9 km] to the southeast)
      • Note: The GPS coordinates that we are using for Yatesville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Yatesville
      • Yatesville is located in Upson County
      • Population from the 2020 Census: 360 people
      • Jump to TripAdvisor's Tourism page for Yatesville <1>
    • Salem
      (21 miles [33.8 km] to the south)
      • Note: The GPS coordinates that we are using for Salem have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Salem
      • Salem is located in Upson County

For an expanded list of the communities that are closest to Meansville, see our County-by-County Page for Meansville.

Newspapers Published in Meansville ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 43 newspapers that have been published in the area around Meansville.

Although we're unaware of any newspapers that were published in the immediate area of Meansville, there are papers which were published within 22 miles [35.4 km]<3>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Meansville.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we begin with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Meansville:

Cemeteries Near Meansville ...

Below are cemeteries that are in the vicinity of Meansville.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Meansville covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Meansville, with the one closest to Meansville listed first.

  • Meansville Cemetery
    (Less than 2 miles to the northeast)
    • Note: The GPS coordinates that we are using for the Meansville Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Meansville Cemetery
  • Fincher Cemetery
    (Less than 2 miles to the west)
    • Note: The GPS coordinates that we are using for the Fincher Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Fincher Cemetery
  • Nazarene Cemetery
    (2 miles [3.2 km] to the southwest)
    • Note: The GPS coordinates that we are using for the Nazarene Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Nazarene Cemetery
  • Liberty Cemetery
    (3 miles [4.8 km] to the southwest)
    • Note: The GPS coordinates that we are using for the Liberty Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Liberty Cemetery
  • Mudbridge Cemetery
    (3 miles [4.8 km] to the south)
    • Note: The GPS coordinates that we are using for the Mudbridge Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Mudbridge Cemetery
  • Century Nelson Cemetery
    (3 miles [4.8 km] to the southeast)
    • Note: The GPS coordinates that we are using for the Century Nelson Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Century Nelson Cemetery
  • Zebulon Cemetery
    (3 miles [4.8 km] to the northwest)
    • Note: The GPS coordinates that we are using for the Zebulon Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Zebulon Cemetery
  • Reid Cemetery
    (3 miles [4.8 km] to the northeast)
    • Note: The GPS coordinates that we are using for the Reid Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Reid Cemetery
  • Bush Cemetery
    (3 miles [4.8 km] to the northeast)
    • Note: The GPS coordinates that we are using for the Bush Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Bush Cemetery
  • Wood Cemetery
    (3 miles [4.8 km] to the northeast)
    • Note: The GPS coordinates that we are using for the Wood Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Wood Cemetery
  • Nazareth Cemetery
    (3 miles [4.8 km] to the north)
    • Note: The GPS coordinates that we are using for the Nazareth Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Nazareth Cemetery
  • Beulah Cemetery
    (4 miles [6.4 km] to the west)
    • Note: The GPS coordinates that we are using for the Beulah Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Beulah Cemetery
  • Continue List   (464 more) ...
    • Ebenezer UMC Cemetery
      (4 miles [6.4 km] to the northeast)
    • Zebulon Cemetery
      (4 miles [6.4 km] to the northwest)
      • Note: The GPS coordinates that we are using for the Zebulon Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Zebulon Cemetery
    • Cook Cemetery
      (4 miles [6.4 km] to the northeast)
      • Note: The GPS coordinates that we are using for the Cook Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Cook Cemetery

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<5>

The Rand McNally Atlas shows that in 1895, Meansville had a post office and railroad service. In 2020, Meansville had a population of 215 people.

These communities are listed based on their distance from Meansville, with the one closest to Meansville listed first.

  • Weaver ‑ Historic
    (3 miles [4.8 km] to the north)
    • Note: The GPS coordinates that we are using for Weaver have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Weaver
    • Weaver is located in Pike County
  • Zebulon
    (4 miles [6.4 km] to the northwest)
  • Delray
    (6 miles [9.7 km] to the south)
    • Note: The GPS coordinates that we are using for Delray have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Delray
    • Delray is located in Upson County
  • Jolly
    (6 miles [9.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Jolly have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Jolly
    • Jolly is located in Pike County
  • The Rock
    (7 miles [11.3 km] to the southeast)
    • Note: The GPS coordinates that we are using for The Rock have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for The Rock
    • The Rock is located in Upson County
    • Former name for The Rock:
    • Topeka Junction
    • Jump to TripAdvisor's Tourism page for The Rock <1>
  • Concord
    (8 miles [12.9 km] to the west)
  • Williamson
    (9 miles [14.5 km] to the north)
    • Note: The GPS coordinates that we are using for Williamson have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Williamson
    • Williamson is located in Pike County
    • Population from the 2020 Census: 521 people
    • Jump to TripAdvisor's Tourism page for Williamson <1>
  • Beeks ‑ Historic
    (10 miles [16.1 km] to the northwest)
    • Note: The GPS coordinates that we are using for Beeks have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Beeks
    • Beeks is located in Pike County
  • Neal
    (10 miles [16.1 km] to the west)
    • Note: The GPS coordinates that we are using for Neal have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Neal
    • Neal is located in Pike County
  • Rover
    (10 miles [16.1 km] to the north)
    • Note: The GPS coordinates that we are using for Rover have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rover
    • Rover is located in Spalding County
  • Molena
    (11 miles [17.7 km] to the west)
    • Note: The GPS coordinates that we are using for Molena have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Molena
    • Molena is located in Pike County
    • Population from the 2020 Census: 399 people
    • Jump to TripAdvisor's Tourism page for Molena <1>
  • Hendricks
    (11 miles [17.7 km] to the southwest)
    • Note: The GPS coordinates that we are using for Hendricks have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hendricks
    • Hendricks is located in Upson County
  • Continue List   (14 more) ...
    • Thomaston
      (11 miles [17.7 km] to the south)
    • Hollonville
      (11 miles [17.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Hollonville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hollonville
      • Hollonville is located in Pike County
    • Goggins
      (12 miles [19.3 km] to the east)
      • Note: The GPS coordinates that we are using for Goggins have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Goggins
      • Goggins is located in Lamar County
      • Goggins has also been known as:
      • Goggans Station
      • Goggans
      • Goggansville
      • Goggins Station
      • Gogginsville

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Meansville. See our List of 1890's Communities around Meansville.

Unfortunately, we don't know of a website for Meansville. If you can help, please contact us through our Feedback Page.

The official website for Pike County: www.co.pike.ga.us/

The official website for State of Georgia: https://georgia.gov/

Footnotes ...

<1>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Meansville) to Point B.Our distance measurements begin at a specific point in Meansville. The point we use is located at these GPS coordinates - Latitude: 33.0490, Longitude: -84.3070    
<4>The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com.
<5>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Meansville, please let us know so that we can improve our accuracy.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024