Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Hassler Mill in the Atlas, the following communities of the 1890's would have been found near the current location of Hassler Mill. The following communities are listed based on their distance, with the one closest to Hassler Mill listed first.
- Rocky Face
(Less than 2 miles to the west)
- Crow ‑ Historic
(2 miles [3.2 km] to the west)
- Crow is located in Whitfield County
- Jump to our Gazetteer entry for Crow
- Dalton
(3 miles [4.8 km] to the southeast)
- Tunnel Hill
(3 miles [4.8 km] to the northwest)
- Waring
(3 miles [4.8 km] to the northeast)
- Waring is located in Whitfield County
- Jump to our Gazetteer entry for Waring
- Trickum
(3 miles [4.8 km] to the west)
- Trickum is located in Whitfield County
- Jump to our Gazetteer entry for Trickum
- Fillmore ‑ Historic
(5 miles [8 km] to the east)
- Fillmore is located in Whitfield County
- Jump to our Gazetteer entry for Fillmore
- Gordon Springs ‑ Historic
(7 miles [11.3 km] to the southwest)
- Gordon Springs is located in Whitfield County
- Jump to our Gazetteer entry for Gordon Springs
- Catoosa Springs
(7 miles [11.3 km] to the north)
- Catoosa Springs is located in Catoosa County
- Jump to our Gazetteer entry for Catoosa Springs
- Phelps
(7 miles [11.3 km] to the south)
- Phelps is located in Whitfield County
- Jump to our Gazetteer entry for Phelps
- Cedar Ridge
(7 miles [11.3 km] to the east)
- Cedar Ridge is located in Whitfield County
- Jump to our Gazetteer entry for Cedar Ridge
- Dawnville
(7 miles [11.3 km] to the east)
- Dawnville is located in Whitfield County
- Jump to our Gazetteer entry for Dawnville
- Keith
(8 miles [12.9 km] to the north)
- Keith is located in Catoosa County
- Jump to our Gazetteer entry for Keith
- Chestnutflat ‑ Historic
(9 miles [14.5 km] to the southwest)
- Chestnutflat is located in Walker County
- Jump to our Gazetteer entry for Chestnutflat
- Ringgold
(9 miles [14.5 km] to the northwest)
- Villanow
(10 miles [16.1 km] to the southwest)
- Villanow is located in Walker County
- Jump to our Gazetteer entry for Villanow
- Estimated population in 2019: 16,058 people
- Carbondale
(10 miles [16.1 km] to the south)
- Carbondale is located in Whitfield County
- Jump to our Gazetteer entry for Carbondale
- Tilton
(10 miles [16.1 km] to the southeast)
- Tilton is located in Whitfield County
- Jump to our Gazetteer entry for Tilton
- Norton
(10 miles [16.1 km] to the east)
- Norton is located in Whitfield County
- Jump to our Gazetteer entry for Norton
- Ruralvale
(10 miles [16.1 km] to the northeast)
- Ruralvale is located in Whitfield County
- Jump to our Gazetteer entry for Ruralvale
- Furnace ‑ Historic
(11 miles [17.7 km] to the south)
- Furnace is located in Walker County
- Jump to our Gazetteer entry for Furnace
- Spring Place
(11 miles [17.7 km] to the east)
- Spring Place is located in Murray County
- Jump to our Gazetteer entry for Spring Place
- Cohutta
(11 miles [17.7 km] to the north)
- Beaverdale
(12 miles [19.3 km] to the northeast)
- Beaverdale is located in Whitfield County
- Jump to our Gazetteer entry for Beaverdale
- Boynton
(12 miles [19.3 km] to the northwest)
- Boynton is located in Catoosa County
- Jump to our Gazetteer entry for Boynton
- Post Oak
(12 miles [19.3 km] to the northwest)
- Post Oak is located in Catoosa County
- Jump to our Gazetteer entry for Post Oak
- Rock Spring
(12 miles [19.3 km] to the west)
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Hassler Mill, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |