Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Gregory in the Atlas, the following communities of the 1890's would have been found near the current location of Gregory. The following communities are listed based on their distance, with the one closest to Gregory listed first.
- Cisco
(2 miles [3.2 km] to the east)- Jump to our Gazetteer entry for Cisco
- Cisco is located in Murray County
- Jump to TripAdvisor's Tourism page for Cisco <2>
- Beaverdale
(4 miles [6.4 km] to the southwest)- Note: The GPS coordinates that we are using for Beaverdale have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Beaverdale
- Beaverdale is located in Whitfield County
- Sumac
(4 miles [6.4 km] to the south) - Conasauga
(4 miles [6.4 km] to the northeast)- Note: The GPS coordinates that we are using for Conasauga have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Conasauga
- Conasauga is located in Polk County (TN)
- Jump to TripAdvisor's Tourism page for Conasauga <2>
- Earnest ‑ Historic
(4 miles [6.4 km] to the northwest) - Felker
(5 miles [8 km] to the north) - Mills ‑ Historic
(5 miles [8 km] to the west) - Ruralvale
(6 miles [9.7 km] to the southwest) - Norton
(7 miles [11.3 km] to the southwest) - Doogan
(7 miles [11.3 km] to the east) - Alaculsy
(8 miles [12.9 km] to the east) - Oldfort
(8 miles [12.9 km] to the north)- Jump to our Gazetteer entry for Oldfort
- Oldfort is located in Polk County (TN)
- Red Clay
(9 miles [14.5 km] to the west)- Jump to our Gazetteer entry for Red Clay
- Red Clay is located in Whitfield County
- Cohutta
(9 miles [14.5 km] to the west)- Jump to our Gazetteer entry for Cohutta
- Cohutta is located in Whitfield County
- Population from the 2020 Census: 644 people
- Jump to TripAdvisor's Tourism page for Cohutta <2>
- Dawnville
(10 miles [16.1 km] to the southwest) - Hasslers Mill
(10 miles [16.1 km] to the southeast)- Note: The GPS coordinates that we are using for Hasslers Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hasslers Mill
- Hasslers Mill is located in Murray County
- Sylco
(11 miles [17.7 km] to the northeast) - Fetzerton ‑ Historic
(11 miles [17.7 km] to the northeast) - Fillmore ‑ Historic
(12 miles [19.3 km] to the southwest) - Fort Mountain ‑ Historic
(12 miles [19.3 km] to the south)- Note: The GPS coordinates that we are using for Fort Mountain have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fort Mountain
- Fort Mountain is located in Murray County
- Chable ‑ Historic
(12 miles [19.3 km] to the northeast) - Parksville
(12 miles [19.3 km] to the northeast)- Note: The GPS coordinates that we are using for Parksville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Parksville
- Parksville is located in Polk County (TN)
- Ocoee
(12 miles [19.3 km] to the north)- Jump to our Gazetteer entry for Ocoee
- Ocoee is located in Polk County (TN)
- Jump to TripAdvisor's Tourism page for Ocoee <2>
- Howardville
(12 miles [19.3 km] to the west)- Note: We haven't been able to verify our GPS coordinates for Howardville. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Howardville
- Howardville is located in Hamilton County (TN)
- Waring
(13 miles [20.9 km] to the southwest)- Jump to our Gazetteer entry for Waring
- Waring is located in Whitfield County
- Cedar Ridge
(13 miles [20.9 km] to the southwest)- Note: The GPS coordinates that we are using for Cedar Ridge have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cedar Ridge
- Cedar Ridge is located in Whitfield County
- Spring Place
(13 miles [20.9 km] to the south)- Note: The GPS coordinates that we are using for Spring Place have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Spring Place
- Spring Place is located in Murray County
- Black Fox
(13 miles [20.9 km] to the northwest)
Off-the-Road Links ...
The official website for State of Georgia: https://georgia.gov/
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Gregory, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |