RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Georgia >> Whitfield County >> Dawnville >> Tidbits & TriviaIndex...










Learn About
The Commemorative
Quarter for
Georgia


The Commemorative Quarter for Georgia







Outdoor Activities ...

As we travel, we like to pursue some of our interests (such as astronomy and bird watching).

When in Dawnville, we use the following websites to find information relevant to Dawnville and the surrounding area.

  • Weather ...
  • Astronomy & Satellites ...
    • Whether using binoculars, a small telescope or the naked-eye, the Heavens-Above website can help you to find your way around the night-time sky. In addition to detailed sky charts, their website will help you find planets, asteriods, comets, satellites and their tracks across the sky.
    • To give accurate results, Heavens-Above requires the latitude and longitude of your location. As a starting point, when we link to Heavens-Above, we pass this GPS location for Dawnville:
    • 34.819246, -84.879109
    • Once you're on the Heavens-Above website, you can improve its accuracy by giving a more precise longitude and latitude as your actual position.
    • The Heavens-Above Website, centered on Dawnville
  • Waymarking ...
    • Looking for somewhere out of the ordinary? Find a unique place and want to share it with others? Then it's time to visit Waymarking.com:
    • Waymark.com

Curious and Interesting Names Near Dawnville ...

As we travel, we always see a community with a name that gives pause. While there are names which are interesting or familiar, some catch our attention or strike our fancy. We always wonder about such a name. If time permits and the community is not too far, we'll usually try to make a side-trip.

  • Cedar Ridge
    (2 miles [3.2 km] to the south)
    • Note: The GPS coordinates that we are using for Cedar Ridge have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cedar Ridge
    • Cedar Ridge is located in Whitfield County
  • Cedar Valley
    (3 miles [4.8 km] to the northwest)
    • Note: The GPS coordinates that we are using for Cedar Valley have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cedar Valley
    • Cedar Valley is located in Whitfield County
  • Keiths Mill
    (5 miles [8 km] to the south)
    • Note: The GPS coordinates that we are using for Keiths Mill have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Keiths Mill
    • Keiths Mill is located in Whitfield County
  • Plainview
    (5 miles [8 km] to the northwest)
    • Note: The GPS coordinates that we are using for Plainview have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Plainview
    • Plainview is located in Whitfield County
    • Estimated population in 2019: 318 people
  • Pleasant Grove
    (3 miles [4.8 km] to the west)
    • Note: The GPS coordinates that we are using for Pleasant Grove have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Pleasant Grove
    • Pleasant Grove is located in Whitfield County
  • Ruralvale
    (4 miles [6.4 km] to the north)
    • Note: The GPS coordinates that we are using for Ruralvale have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ruralvale
    • Ruralvale is located in Whitfield County
  • Spring Place
    (5 miles [8 km] to the southeast)
    • Note: The GPS coordinates that we are using for Spring Place have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Spring Place
    • Spring Place is located in Murray County
  • Treadwell
    (2 miles [3.2 km] to the south)
    • Note: The GPS coordinates that we are using for Treadwell have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Treadwell
    • Treadwell is located in Murray County
  • Union Point
    (4 miles [6.4 km] to the southwest)
    • Jump to our Gazetteer entry for Union Point
    • Union Point is located in Whitfield County
    • Population from the 2010 Census: 1,845 people

How Far From Dawnville to ...

We spend a lot of time looking through Gazetteers that were published in the late 1800's and early 1900's. Many of the Gazetteers include the distance from a community such as Dawnville to various places of note, such as the White House.

With a nod to our favorite Gazetteers, the straight-line distance<2> beginning in Dawnville and extending to:

  • Dalton, which is the Seat of Whitfield County, lies just to the Southwest.
  • Atlanta, which is the State Capital of Georgia, lies 78 miles [125.5 km]<2> to the south southeast (SSE). If you could drive a straight line from Dawnville to Atlanta, with an average speed<3>of 63 miles [101.4 km] per hour, it would take less than two hours to make the trip. A comfortable walk of 2.2 miles [3.5 km] per hour would take 5 days. A horse and buggy averaging 3.2 miles [5.1 km] per hour would take most of three days.
  • The White House (Washington, DC) is 516 miles [830.4 km] to the northeast (NE). Driving would take just over a day, a buggy would take 21 days and walking would take 30 days.
  • The shortest distance<4> to Jerusalem (specifically the Temple Mount and the Dome of the Rock) is 6,410 miles [10,315.9 km] and it lies to the northeast (NE).<5>
  • The distance to the Great Mosque of Mecca (specifically the Ka'bah - or Kaaba ) is 7,118 miles [11,455.3 km] and it lies to the northeast (NE).<6>
  • The distance to Saint Peter's Basilica (The Vatican) is 4,995 miles [8,038.7 km] and it lies to the northeast (NE).<7>

Unfortunately, we don't know of a website for Dawnville. If you can help, please contact us through our Feedback Page.

The official website for Whitfield County: www.whitfieldcountyga.com/

The official website for State of Georgia: https://georgia.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Dawnville) to Point B.Our distance measurements begin at a specific point in Dawnville. The point we use is located at these GPS coordinates - Latitude: 34.8192, Longitude: -84.8791       In this case, the coordinates for Dawnville have been provided by the Geographic Names Information System (GNIS).
<3>While we have tried to pick reasonable speeds, the rate of travel is very theoretical - obstacles like fences, hills, lakes, river crossings and rest stops have been ignored. When we say 'Days' of travel, we're assuming 8 hours of travel per day.
<4>The shortest line can be visualized by stretching a string on a Globe from Point A to Point B - this is known as a Great Circle Route. Where you might expect the shortest route from Dawnville to the Middle East to be East and South, the Great Circle Route actually lies to the North and East.
<5>The calculated bearing (or angle) to Jerusalem is 312.587 degrees.
<6>The calculated bearing (or angle) to Mecca is 308.212 degrees.
<7>The calculated bearing (or angle) to the Vatican is 309.222 degrees.









 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024