RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Georgia >> Murray County >> Cisco >> Nearby Communities - 1890sIndex...










Learn About
The Commemorative
Quarter for
Georgia

The Commemorative Quarter for Georgia





Nearby Communities in the 1890s


We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.

If it applies, we indicate whether a community no longer exists and is now historic.<1>

The Rand McNally Atlas shows that in 1895, Cisco had a post office and no railroad service.

The following communities are listed based on their distance from Cisco, with the one closest to Cisco listed first.

  • Conasauga
    (3 miles [4.8 km] to the north)
    • Note: The GPS coordinates that we are using for Conasauga have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Conasauga
    • Conasauga is located in Polk County (TN)
    • Jump to TripAdvisor's Tourism page for Conasauga <3>
  • Doogan
    (4 miles [6.4 km] to the east)
    • Note: The GPS coordinates that we are using for Doogan have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Doogan
    • Doogan is located in Murray County
  • Sumac
    (5 miles [8 km] to the southwest)
    • Note: We haven't been able to verify our GPS coordinates for Sumac. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to our Gazetteer entry for Sumac
    • Sumac is located in Murray County
    • Google driving directions:
    • From your current location to Sumac
    • From Cisco to Sumac
  • Beaverdale
    (6 miles [9.7 km] to the west)
    • Note: The GPS coordinates that we are using for Beaverdale have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Beaverdale
    • Beaverdale is located in Whitfield County
  • Alaculsy
    (6 miles [9.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for Alaculsy have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Alaculsy
    • Alaculsy is located in Murray County
  • Felker
    (6 miles [9.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Felker have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Felker
    • Felker is located in Bradley County (TN)
  • Earnest ‑ Historic
    (6 miles [9.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Earnest have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Earnest
    • Earnest is located in Bradley County (TN)
  • Oldfort
    (7 miles [11.3 km] to the north)
  • Ruralvale
    (8 miles [12.9 km] to the southwest)
    • Note: We haven't been able to verify our GPS coordinates for Ruralvale. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to our Gazetteer entry for Ruralvale
    • Ruralvale is located in Whitfield County
    • Google driving directions:
    • From your current location to Ruralvale
    • From Cisco to Ruralvale
  • Mills ‑ Historic
    (8 miles [12.9 km] to the west)
    • Note: The GPS coordinates that we are using for Mills have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mills
    • Mills is located in Whitfield County
  • Norton
    (9 miles [14.5 km] to the southwest)
    • Note: The GPS coordinates that we are using for Norton have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Norton
    • Norton is located in Whitfield County
  • Hasslers Mill
    (9 miles [14.5 km] to the south)
    • Note: The GPS coordinates that we are using for Hasslers Mill have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hasslers Mill
    • Hasslers Mill is located in Murray County
  • Sylco
    (9 miles [14.5 km] to the northeast)
    • Note: The GPS coordinates that we are using for Sylco have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sylco
    • Sylco is located in Polk County (TN)
  • Fetzerton ‑ Historic
    (9 miles [14.5 km] to the north)
    • Note: The GPS coordinates that we are using for Fetzerton have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Fetzerton
    • Fetzerton is located in Polk County (TN)
  • Chable ‑ Historic
    (10 miles [16.1 km] to the northeast)
    • Note: The GPS coordinates that we are using for Chable have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Chable
    • Chable is located in Polk County (TN)
  • Parksville
    (11 miles [17.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for Parksville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Parksville
    • Parksville is located in Polk County (TN)
  • Red Clay
    (11 miles [17.7 km] to the west)
  • Dawnville
    (12 miles [19.3 km] to the southwest)
    • Note: The GPS coordinates that we are using for Dawnville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Dawnville
    • Dawnville is located in Whitfield County
  • Fort Mountain ‑ Historic
    (12 miles [19.3 km] to the south)
    • Note: The GPS coordinates that we are using for Fort Mountain have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Fort Mountain
    • Fort Mountain is located in Murray County
  • Ocoee
    (12 miles [19.3 km] to the north)
  • Cohutta
    (12 miles [19.3 km] to the west)
  • Fillmore ‑ Historic
    (13 miles [20.9 km] to the southwest)
    • Note: The GPS coordinates that we are using for Fillmore have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Fillmore
    • Fillmore is located in Whitfield County
  • Cedar Ridge
    (14 miles [22.5 km] to the southwest)
    • Note: The GPS coordinates that we are using for Cedar Ridge have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cedar Ridge
    • Cedar Ridge is located in Whitfield County
  • Spring Place
    (14 miles [22.5 km] to the south)
    • Note: The GPS coordinates that we are using for Spring Place have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Spring Place
    • Spring Place is located in Murray County
  • Waring
    (15 miles [24.1 km] to the southwest)
  • Black Fox
    (15 miles [24.1 km] to the northwest)
    • Note: The GPS coordinates that we are using for Black Fox have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Black Fox
    • Black Fox is located in Bradley County (TN)
  • Climer
    (15 miles [24.1 km] to the north)
    • Note: The GPS coordinates that we are using for Climer have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Climer
    • Climer is located in Bradley County (TN)
  • Howardville
    (15 miles [24.1 km] to the west)
    • Note: We haven't been able to verify our GPS coordinates for Howardville. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to our Gazetteer entry for Howardville
    • Howardville is located in Hamilton County (TN)
    • Google driving directions:
    • From your current location to Howardville
    • From Cisco to Howardville

The official website for State of Georgia: https://georgia.gov/

Footnotes ...

<1>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Cisco, please let us know so that we can improve our accuracy.
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<4>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.




 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 24 Mar 2025