|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Edwards Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Edwards Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Edwards Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Daisy
(3 miles [4.8 km] to the west)
- Claxton
(7 miles [11.3 km] to the west)
- Pembroke
(9 miles [14.5 km] to the east)
- Note: The GPS coordinates that we are using for Pembroke have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pembroke
- Pembroke is located in Bryan County
- Population from the 2020 Census: 2,683 people
- Jump to TripAdvisor's Tourism page for Pembroke <2>
- Hagan
(9 miles [14.5 km] to the west)
- Midway
(10 miles [16.1 km] to the southwest)
- Jump to our Gazetteer entry for Midway
- Midway is located in Tattnall County
- Estimated population in 2019: 657 people
- Bellville
(11 miles [17.7 km] to the west)
- New Hope
(14 miles [22.5 km] to the northwest)
- Note: The GPS coordinates that we are using for New Hope have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Hope
- New Hope is located in Bulloch County
- Manassas
(14 miles [22.5 km] to the west)
- Register
(15 miles [24.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Register have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Register
- Register is located in Bulloch County
- Population from the 2020 Census: 197 people
- Jump to TripAdvisor's Tourism page for Register <2>
- Ellabell
(16 miles [25.7 km] to the east)
- Brooklet
(16 miles [25.7 km] to the north)
- Glennville
(17 miles [27.4 km] to the southwest)
- Olde Towne
(18 miles [29 km] to the north)
- Note: The GPS coordinates that we are using for Olde Towne have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Olde Towne
- Olde Towne is located in Bulloch County
- Hubert
(19 miles [30.6 km] to the northeast)
- Jump to our Gazetteer entry for Hubert
- Hubert is located in Bulloch County
- Pulaski
(19 miles [30.6 km] to the northwest)
- Statesboro
(19 miles [30.6 km] to the north)
- Note: The GPS coordinates that we are using for Statesboro have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Statesboro
- Statesboro is located in Bulloch County
- Population from the 2020 Census: 33,204 people
- Jump to TripAdvisor's Tourism page for Statesboro <2>
- Collins
(19 miles [30.6 km] to the west)
- Reidsville
(20 miles [32.2 km] to the west)
- Note: The GPS coordinates that we are using for Reidsville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Reidsville
- Reidsville is located in Tattnall County
- Population from the 2020 Census: 2,665 people
- Jump to TripAdvisor's Tourism page for Reidsville <2>
- Gum Branch
(20 miles [32.2 km] to the south)
- Note: The GPS coordinates that we are using for Gum Branch have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gum Branch
- Gum Branch is located in Liberty County
- Population from the 2020 Census: 269 people
- Leefield
(20 miles [32.2 km] to the northeast)
- Jump to our Gazetteer entry for Leefield
- Leefield is located in Bulloch County
- Fort Stewart
(21 miles [33.8 km] to the southeast)
- Bryan Village
(21 miles [33.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Bryan Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bryan Village
- Bryan Village is located in Liberty County
- Eden
(22 miles [35.4 km] to the east)
- Cobbtown
(22 miles [35.4 km] to the west)
- Jump to our Gazetteer entry for Cobbtown
- Cobbtown is located in Tattnall County
- Population from the 2020 Census: 342 people
- Former name for Cobbtown:
- Cobb Town
- Jump to TripAdvisor's Tourism page for Cobbtown <2>
- Donald
(23 miles [37 km] to the south)
- Jump to our Gazetteer entry for Donald
- Donald is located in Long County
- Estimated population in 2019: 2,466 people
- Hinesville
(23 miles [37 km] to the southeast)
- Flemington
(23 miles [37 km] to the southeast)
- Meldrim
(23 miles [37 km] to the east)
- Note: The GPS coordinates that we are using for Meldrim have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Meldrim
- Meldrim is located in Effingham County
- Jump to TripAdvisor's Tourism page for Meldrim <2>
- Marlow
(23 miles [37 km] to the east)
- Jump to our Gazetteer entry for Marlow
- Marlow is located in Effingham County
- Metter
(23 miles [37 km] to the northwest)
Off-the-Road Links ...
The official website for Bulloch County: www.bullochcounty.net/ The official website for State of Georgia: https://georgia.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Edwards Cemetery. The point we use is located at these GPS coordinates - Latitude: 32.1544, Longitude: -81.7754 In this case, the coordinates for the Edwards Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|