Welcome to Fort Stewart ...
Fort Stewart is primarily located in Liberty County<1>. A portion of Fort Stewart extends into Long County.
A typical abbreviation for Fort Stewart: Ft. Stewart
Fort Stewart is near sea level<2>.
Time Zone: Fort Stewart lies in the Eastern Time Zone (EST/EDT) and observes daylight saving time
The telephone area code for Fort Stewart: (912)
The ZIP codes for Fort Stewart: 31314-31315<3>
Communities Also Named Fort Stewart ...
Using our Gazetteer, we found another community named Fort Stewart - it's located in Ontario.
For more information, see our Tidbits & Trivia Page for Fort Stewart.
Communities near Fort Stewart ...
We have created a list of 10 communities that are near Fort Stewart.
- Richmond Hill
(18 miles [29 km] to the east)- Jump to our Gazetteer entry for Richmond Hill
- Richmond Hill is located in Bryan County
- Population from the 2020 Census: 14,408 people
- Jump to TripAdvisor's Tourism page for Richmond Hill <4>
- Glennville
(19 miles [30.6 km] to the west)- Jump to our Gazetteer entry for Glennville
- Glennville is located in Tattnall County
- Population from the 2020 Census: 5,014 people
- Jump to TripAdvisor's Tourism page for Glennville <4>
- Walthourville
(7 miles [11.3 km] to the south)- Note: The GPS coordinates that we are using for Walthourville have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Walthourville
- Walthourville is located in Liberty County
- Population from the 2020 Census: 4,065 people
- Jump to TripAdvisor's Tourism page for Walthourville <4>
- Pembroke
(18 miles [29 km] to the north)- Note: The GPS coordinates that we are using for Pembroke have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pembroke
- Pembroke is located in Bryan County
- Population from the 2020 Census: 2,683 people
- Jump to TripAdvisor's Tourism page for Pembroke <4>
- Donald
(14 miles [22.5 km] to the west)- Jump to our Gazetteer entry for Donald
- Donald is located in Long County
- Estimated population in 2019: 2,466 people
- Ludowici
(14 miles [22.5 km] to the southwest)- Note: The GPS coordinates that we are using for Ludowici have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ludowici
- Ludowici is located in Long County
- Population from the 2020 Census: 2,352 people
- Jump to TripAdvisor's Tourism page for Ludowici <4>
- Midway
(11 miles [17.7 km] to the southeast)- Jump to our Gazetteer entry for Midway
- Midway is located in Liberty County
- Population from the 2020 Census: 2,015 people
- Jump to TripAdvisor's Tourism page for Midway <4>
- Trinity
(4 miles [6.4 km] to the northeast) - Screven Fork
(10 miles [16.1 km] to the southeast)- Note: The GPS coordinates that we are using for Screven Fork have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Screven Fork
- Screven Fork is located in Liberty County
- Estimated population in 2019: 771 people
- Riceboro
(14 miles [22.5 km] to the southeast)- Note: The GPS coordinates that we are using for Riceboro have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Riceboro
- Riceboro is located in Liberty County
- Population from the 2020 Census: 765 people
- Jump to TripAdvisor's Tourism page for Riceboro <4>
To Help With Your Genealogy Research ...
We have a couple of sections for those tracing their genealogy.
We created a list of cemeteries that are in the area around Fort Stewart. Our list includes the location of those cemeteries and we provide an overhead view. See our Cemetery List for Fort Stewart.
Using the information from an 1895 Atlas, we've created a list of communities that were in the area of Fort Stewart. Our list includes information such as whether the 1895 community had a post office or railroad service. See our List of 1890's Communities around Fort Stewart.
We also have a detailed list of newspapers that have been published in the area around Fort Stewart. See our Newspapers Page for Fort Stewart.
TripAdvisor Tourism Pages for Fort Stewart ...
Looking for more information about Fort Stewart? A wonderful source is the TripAdvisor website. We always start with the TripAdvisor Tourism page, where you can read an overview with links that will help you find lodging, restaurants and attractions.
In addition to the Tourism page for Fort Stewart, there are neighboring communities that also have Tourism pages. More information about those communities can be found on our TripAdvisor Page for Fort Stewart.
Off-the-Road Links ...
Unfortunately, we don't know of a website for Fort Stewart. If you can help, please contact us through our Feedback Page.
The official website for State of Georgia: https://georgia.gov/
Footnotes ...
| <1> | If you're interested in how the shape of Georgia's counties, including Liberty, have changed over time, we recommend the Atlas of Historical County Boundaries. |
| <2> | The elevation is an estimate for the area around Fort Stewart - it will be higher in some places and lower in others. |
| <3> | ZIP Codes have been created by the United States Postal Service (USPS) as a way of grouping addresses to make delivery more efficient. The boundaries of the ZIP Code can be changed, re-assigned, eliminated or overlapped with other ZIP Codes. So keep in mind that any given ZIP Code is only 'loosely' associated with a community (such as Fort Stewart). When looking for a ZIP Code, whether Fort Stewart or elsewhere, it's always best to check the website of the United States Postal Service (USPS). Our list of ZIP Codes for Fort Stewart includes: 31314 & 31315. |
| <4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <5> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |