|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Corinth Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Corinth Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Corinth Cemetery. We've listed the following communities based on their distance, with the closest first.
- Ellabell
(8 miles [12.9 km] to the north)
- Bryan Village
(9 miles [14.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Bryan Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bryan Village
- Bryan Village is located in Liberty County
- Fort Stewart
(10 miles [16.1 km] to the southwest)
- Flemington
(10 miles [16.1 km] to the south)
- Fleming
(10 miles [16.1 km] to the southeast)
- Pembroke
(10 miles [16.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Pembroke have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pembroke
- Pembroke is located in Bryan County
- Population from the 2020 Census: 2,683 people
- Jump to TripAdvisor's Tourism page for Pembroke <2>
- Hinesville
(12 miles [19.3 km] to the south)
- Meldrim
(12 miles [19.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Meldrim have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Meldrim
- Meldrim is located in Effingham County
- Jump to TripAdvisor's Tourism page for Meldrim <2>
- Richmond Hill
(13 miles [20.9 km] to the east)
- Eden
(13 miles [20.9 km] to the northeast)
- Cherokee Village
(14 miles [22.5 km] to the south)
- Note: The GPS coordinates that we are using for Cherokee Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cherokee Village
- Cherokee Village is located in Liberty County
- Gum Branch
(15 miles [24.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Gum Branch have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gum Branch
- Gum Branch is located in Liberty County
- Population from the 2020 Census: 269 people
- Midway
(15 miles [24.1 km] to the south)
- Ogeechee Farms
(15 miles [24.1 km] to the east)
- Jump to our Gazetteer entry for Ogeechee Farms
- Ogeechee Farms is located in Chatham County
- Bloomingdale
(15 miles [24.1 km] to the northeast)
- Allenhurst
(16 miles [25.7 km] to the south)
- Walthourville
(17 miles [27.4 km] to the south)
- Note: The GPS coordinates that we are using for Walthourville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Walthourville
- Walthourville is located in Liberty County
- Population from the 2020 Census: 4,065 people
- Jump to TripAdvisor's Tourism page for Walthourville <2>
- Georgetown
(17 miles [27.4 km] to the east)
- Pooler
(17 miles [27.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Pooler have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pooler
- Pooler is located in Chatham County
- Population from the 2020 Census: 26,022 people
- Jump to TripAdvisor's Tourism page for Pooler <2>
- Keller
(19 miles [30.6 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Keller. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Keller
- Keller is located in Bryan County
- Grubbs
(19 miles [30.6 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Grubbs. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Grubbs
- Grubbs is located in Chatham County
- Marlow
(19 miles [30.6 km] to the north)
- Jump to our Gazetteer entry for Marlow
- Marlow is located in Effingham County
- Riceboro
(20 miles [32.2 km] to the south)
- Note: The GPS coordinates that we are using for Riceboro have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Riceboro
- Riceboro is located in Liberty County
- Population from the 2020 Census: 765 people
- Jump to TripAdvisor's Tourism page for Riceboro <2>
- Fort McAllister
(20 miles [32.2 km] to the southeast)
- Jump to our Gazetteer entry for Fort McAllister
- Fort McAllister is located in Bryan County
- Hubert
(20 miles [32.2 km] to the north)
- Jump to our Gazetteer entry for Hubert
- Hubert is located in Bulloch County
- Daisy
(20 miles [32.2 km] to the northwest)
Off-the-Road Links ...
The official website for Bryan County: www.bryancountyga.org/ The official website for State of Georgia: https://georgia.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Corinth Cemetery. The point we use is located at these GPS coordinates - Latitude: 32.0108, Longitude: -81.5223 In this case, the coordinates for the Corinth Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|