|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Bull Creek Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Bull Creek Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Bull Creek Cemetery. We've listed the following communities based on their distance, with the closest first.
- Daisy
(2 miles [3.2 km] to the northeast)
- Claxton
(2 miles [3.2 km] to the northwest)
- Hagan
(3 miles [4.8 km] to the northwest)
- Midway
(6 miles [9.7 km] to the south)
- Jump to our Gazetteer entry for Midway
- Midway is located in Tattnall County
- Estimated population in 2019: 657 people
- Bellville
(6 miles [9.7 km] to the west)
- Manassas
(8 miles [12.9 km] to the west)
- Glennville
(13 miles [20.9 km] to the south)
- Reidsville
(14 miles [22.5 km] to the west)
- Note: The GPS coordinates that we are using for Reidsville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Reidsville
- Reidsville is located in Tattnall County
- Population from the 2020 Census: 2,665 people
- Jump to TripAdvisor's Tourism page for Reidsville <2>
- New Hope
(14 miles [22.5 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for New Hope. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for New Hope
- New Hope is located in Bulloch County
- Collins
(14 miles [22.5 km] to the west)
- Pembroke
(15 miles [24.1 km] to the east)
- Note: The GPS coordinates that we are using for Pembroke have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pembroke
- Pembroke is located in Bryan County
- Population from the 2020 Census: 2,683 people
- Jump to TripAdvisor's Tourism page for Pembroke <2>
- Register
(16 miles [25.7 km] to the north)
- Note: The GPS coordinates that we are using for Register have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Register
- Register is located in Bulloch County
- Population from the 2020 Census: 197 people
- Jump to TripAdvisor's Tourism page for Register <2>
- Pulaski
(18 miles [29 km] to the north)
- Cobbtown
(18 miles [29 km] to the northwest)
- Jump to our Gazetteer entry for Cobbtown
- Cobbtown is located in Tattnall County
- Population from the 2020 Census: 342 people
- Former name for Cobbtown:
- Cobb Town
- Jump to TripAdvisor's Tourism page for Cobbtown <2>
- Gum Branch
(20 miles [32.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Gum Branch have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gum Branch
- Gum Branch is located in Liberty County
- Population from the 2020 Census: 269 people
- Olde Towne
(20 miles [32.2 km] to the north)
- Note: The GPS coordinates that we are using for Olde Towne have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Olde Towne
- Olde Towne is located in Bulloch County
- Ohoopee
(20 miles [32.2 km] to the west)
- Jump to our Gazetteer entry for Ohoopee
- Ohoopee is located in Toombs County
- Donald
(21 miles [33.8 km] to the south)
- Jump to our Gazetteer entry for Donald
- Donald is located in Long County
- Estimated population in 2019: 2,466 people
- Metter
(21 miles [33.8 km] to the northwest)
- Brooklet
(21 miles [33.8 km] to the northeast)
- Ellabell
(22 miles [35.4 km] to the east)
- Statesboro
(22 miles [35.4 km] to the north)
- Note: The GPS coordinates that we are using for Statesboro have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Statesboro
- Statesboro is located in Bulloch County
- Population from the 2020 Census: 33,204 people
- Jump to TripAdvisor's Tourism page for Statesboro <2>
- Fort Stewart
(23 miles [37 km] to the southeast)
- Bryan Village
(23 miles [37 km] to the southeast)
- Note: The GPS coordinates that we are using for Bryan Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bryan Village
- Bryan Village is located in Liberty County
- Hinesville
(25 miles [40.2 km] to the southeast)
- Flemington
(25 miles [40.2 km] to the southeast)
- Hubert
(25 miles [40.2 km] to the northeast)
- Jump to our Gazetteer entry for Hubert
- Hubert is located in Bulloch County
- Leefield
(25 miles [40.2 km] to the northeast)
- Jump to our Gazetteer entry for Leefield
- Leefield is located in Bulloch County
Off-the-Road Links ...
The official website for State of Georgia: https://georgia.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Bull Creek Cemetery. The point we use is located at these GPS coordinates - Latitude: 32.1285, Longitude: -81.8743 In this case, the coordinates for the Bull Creek Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|