Our Genealogy Helper
Introduction ...
We have a couple of goals for our Gazetteer:
- That it be a tool which helps us with planning our trips.
- We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
- On our trips, we try to visit those places where our ancestors left their footprints.
By learning about Grandview (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.
As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Grandview. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.
Neighboring Counties ...
When searching for family records, we have frequently made the mistake of not checking the neighboring counties.
For example, we have great-grandparents who lived in the northwest corner of their home county. During their lives, most doctors were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the north.
So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived: their home county contained property and probate records; the county to the west contained birth and death records; the county to the north contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.
If you're in a similar situation, we hope that the following information helps.
Grandview is located in Cullman County.
To see how the shape of Alabama's counties have changed over time, we recommend the Atlas of Historical County Boundaries.
The following counties adjoin and form the boundaries of Cullman County: Blount, Lawrence, Marshall, Morgan, Walker & Winston.
Below are the counties that are near Grandview. For each of these counties, we show a sample of those communities that are closest to Grandview:
- Cullman County (The home county of Grandview)
- The following are listed by their distance from Grandview, with the one closest to Grandview listed first.
- Good Hope
(2 miles [3.2 km] to the southeast) - Trimble
(3 miles [4.8 km] to the southwest)- Jump to our Gazetteer entry for Trimble
- Trimble is located in Cullman County
- Cullman
(5 miles [8 km] to the northeast)- Note: The GPS coordinates that we are using for Cullman have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cullman
- Cullman is located in Cullman County
- Population from the 2020 Census: 16,564 people
- Jump to TripAdvisor's Tourism page for Cullman <2>
- Dodge City
(5 miles [8 km] to the south)- Note: The GPS coordinates that we are using for Dodge City have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dodge City
- Dodge City is located in Cullman County
- Population from the 2020 Census: 621 people
- Logan
(5 miles [8 km] to the west)- Note: The GPS coordinates that we are using for Logan have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Logan
- Logan is located in Cullman County
- Jump to TripAdvisor's Tourism page for Logan <2>
- White City
(7 miles [11.3 km] to the east)- Note: The GPS coordinates that we are using for White City have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for White City
- White City is located in Cullman County
- South Vinemont
(7 miles [11.3 km] to the north)- Note: The GPS coordinates that we are using for South Vinemont have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Vinemont
- South Vinemont is located in Cullman County
- Population from the 2020 Census: 636 people
- East Point
(7 miles [11.3 km] to the northeast)- Jump to our Gazetteer entry for East Point
- East Point is located in Cullman County
- Vinemont
(8 miles [12.9 km] to the north)- Note: The GPS coordinates that we are using for Vinemont have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vinemont
- Vinemont is located in Cullman County
- Jump to TripAdvisor's Tourism page for Vinemont <2>
- West Point
(8 miles [12.9 km] to the north)- Note: The GPS coordinates that we are using for West Point have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West Point
- West Point is located in Cullman County
- Population from the 2020 Census: 604 people
- Central
(8 miles [12.9 km] to the northwest)- Jump to our Gazetteer entry for Central
- Central is located in Cullman County
- Bremen
(9 miles [14.5 km] to the south)- Jump to our Gazetteer entry for Bremen
- Bremen is located in Cullman County
- Jump to TripAdvisor's Tourism page for Bremen <2>
- Chances Crossroad
(9 miles [14.5 km] to the west)- Jump to our Gazetteer entry for Chances Crossroad
- Chances Crossroad is located in Cullman County
- Blount County
- The following are listed by their distance from Grandview, with the one closest to Grandview listed first.
- Bangor
(13 miles [20.9 km] to the southeast)- Jump to our Gazetteer entry for Bangor
- Bangor is located in Blount County
- Gum Springs
(14 miles [22.5 km] to the east)- Note: The GPS coordinates that we are using for Gum Springs have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gum Springs
- Gum Springs is located in Blount County
- Blount Springs
(14 miles [22.5 km] to the southeast)- Note: The GPS coordinates that we are using for Blount Springs have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Blount Springs
- Blount Springs is located in Blount County
- Mountain Grove
(16 miles [25.7 km] to the east)- Note: The GPS coordinates that we are using for Mountain Grove have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mountain Grove
- Mountain Grove is located in Blount County
- Reid's
(16 miles [25.7 km] to the south) - Smoke Rise
(17 miles [27.4 km] to the south)- Note: The GPS coordinates that we are using for Smoke Rise have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Smoke Rise
- Smoke Rise is located in Blount County
- Blountsville
(18 miles [29 km] to the east)- Note: The GPS coordinates that we are using for Blountsville have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Blountsville
- Blountsville is located in Blount County
- Population from the 2020 Census: 1,657 people
- Jump to TripAdvisor's Tourism page for Blountsville <2>
- Hayden
(18 miles [29 km] to the southeast)- Jump to our Gazetteer entry for Hayden
- Hayden is located in Blount County
- Population from the 2020 Census: 1,358 people
- Jump to TripAdvisor's Tourism page for Hayden <2>
- Red Hill
(19 miles [30.6 km] to the south) - Nectar
(19 miles [30.6 km] to the southeast) - Cleveland
(21 miles [33.8 km] to the southeast)- Note: The GPS coordinates that we are using for Cleveland have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cleveland
- Cleveland is located in Blount County
- Population from the 2020 Census: 1,315 people
- Jump to TripAdvisor's Tourism page for Cleveland <2>
- Liberty
(22 miles [35.4 km] to the east) - Adville
(22 miles [35.4 km] to the southeast)- Jump to our Gazetteer entry for Adville
- Adville is located in Blount County
- Jefferson County
- The following are listed by their distance from Grandview, with the one closest to Grandview listed first.
- Corner
(22 miles [35.4 km] to the south) - Trafford
(22 miles [35.4 km] to the southeast)- Note: The GPS coordinates that we are using for Trafford have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Trafford
- Trafford is located in Jefferson County
- Population from the 2020 Census: 604 people
- Jump to TripAdvisor's Tourism page for Trafford <2>
- Kimberly
(25 miles [40.2 km] to the south)- Note: The GPS coordinates that we are using for Kimberly have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kimberly
- Kimberly is located in Jefferson County
- Population from the 2020 Census: 3,620 people
- Jump to TripAdvisor's Tourism page for Kimberly <2>
- Morris
(26 miles [41.8 km] to the south) - Masseyline
(26 miles [41.8 km] to the southeast)- Note: The GPS coordinates that we are using for Masseyline have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Masseyline
- Masseyline is located in Jefferson County
- Majestic
(27 miles [43.5 km] to the south) - Robbins Crossroads
(27 miles [43.5 km] to the south)- Jump to our Gazetteer entry for Robbins Crossroads
- Robbins Crossroads is located in Jefferson County
- Sayre
(28 miles [45.1 km] to the south) - Bradford
(28 miles [45.1 km] to the southeast)- Jump to our Gazetteer entry for Bradford
- Bradford is located in Jefferson County
- Crosston
(29 miles [46.7 km] to the south) - Village Springs
(29 miles [46.7 km] to the southeast)- Note: The GPS coordinates that we are using for Village Springs have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Village Springs
- Village Springs is located in Jefferson County
- Palmerdale
(30 miles [48.3 km] to the southeast)- Jump to our Gazetteer entry for Palmerdale
- Palmerdale is located in Jefferson County
- Lawrence County
- The following are listed by their distance from Grandview, with the one closest to Grandview listed first.
- Oakville
(26 miles [41.8 km] to the northwest) - Wren
(30 miles [48.3 km] to the northwest)
- Marshall County
- The following are listed by their distance from Grandview, with the one closest to Grandview listed first.
- Hog Jaw
(24 miles [38.6 km] to the northeast)- Jump to our Gazetteer entry for Hog Jaw
- Hog Jaw is located in Marshall County
- Pine Lake Village
(25 miles [40.2 km] to the northeast)- Note: The GPS coordinates that we are using for Pine Lake Village have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pine Lake Village
- Pine Lake Village is located in Marshall County
- Ruth
(25 miles [40.2 km] to the northeast) - Arab
(26 miles [41.8 km] to the northeast)- Jump to our Gazetteer entry for Arab
- Arab is located in Marshall County
- Population from the 2020 Census: 8,406 people
- Jump to TripAdvisor's Tourism page for Arab <2>
- Askea Grove
(27 miles [43.5 km] to the northeast)- Jump to our Gazetteer entry for Askea Grove
- Askea Grove is located in Marshall County
- Big Spring ‑ Historic
(29 miles [46.7 km] to the east)- Note: The GPS coordinates that we are using for Big Spring have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Big Spring
- Big Spring is located in Marshall County
- Bowen ‑ Historic
(30 miles [48.3 km] to the east) - Friendship
(30 miles [48.3 km] to the northeast)- Jump to our Gazetteer entry for Friendship
- Friendship is located in Marshall County
- Grassy
(30 miles [48.3 km] to the northeast)
- Morgan County
- The following are listed by their distance from Grandview, with the one closest to Grandview listed first.
- Lacon
(14 miles [22.5 km] to the north)- Jump to our Gazetteer entry for Lacon
- Lacon is located in Morgan County
- Falkville
(16 miles [25.7 km] to the north)- Note: The GPS coordinates that we are using for Falkville have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Falkville
- Falkville is located in Morgan County
- Population from the 2020 Census: 1,256 people
- Jump to TripAdvisor's Tourism page for Falkville <2>
- Eva
(16 miles [25.7 km] to the northeast)- Note: The GPS coordinates that we are using for Eva have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Eva
- Eva is located in Morgan County
- Population from the 2020 Census: 498 people
- Jump to TripAdvisor's Tourism page for Eva <2>
- Cedar Plains
(17 miles [27.4 km] to the north)- Note: The GPS coordinates that we are using for Cedar Plains have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cedar Plains
- Cedar Plains is located in Morgan County
- Leesdale
(18 miles [29 km] to the north) - Hartselle
(21 miles [33.8 km] to the north)- Jump to our Gazetteer entry for Hartselle
- Hartselle is located in Morgan County
- Population from the 2020 Census: 14,470 people
- Jump to TripAdvisor's Tourism page for Hartselle <2>
- Hulaco
(21 miles [33.8 km] to the northeast) - Florette
(22 miles [35.4 km] to the northeast)- Jump to our Gazetteer entry for Florette
- Florette is located in Morgan County
- Ryan Crossroads
(22 miles [35.4 km] to the northeast)- Jump to our Gazetteer entry for Ryan Crossroads
- Ryan Crossroads is located in Morgan County
- Danville
(22 miles [35.4 km] to the northwest)- Jump to our Gazetteer entry for Danville
- Danville is located in Morgan County
- Jump to TripAdvisor's Tourism page for Danville <2>
- Somerville
(24 miles [38.6 km] to the north)- Note: The GPS coordinates that we are using for Somerville have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Somerville
- Somerville is located in Morgan County
- Population from the 2020 Census: 782 people
- Apple Grove
(25 miles [40.2 km] to the northeast)- Note: The GPS coordinates that we are using for Apple Grove have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Apple Grove
- Apple Grove is located in Morgan County
- Burningtree Mountain
(26 miles [41.8 km] to the north)- Note: The GPS coordinates that we are using for Burningtree Mountain have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Burningtree Mountain
- Burningtree Mountain is located in Morgan County
- Walker County
- The following are listed by their distance from Grandview, with the one closest to Grandview listed first.
- Powellville
(18 miles [29 km] to the southwest)- Jump to our Gazetteer entry for Powellville
- Powellville is located in Walker County
- Marylee
(19 miles [30.6 km] to the southwest) - Burrows Crossroads
(20 miles [32.2 km] to the southwest)- Jump to our Gazetteer entry for Burrows Crossroads
- Burrows Crossroads is located in Walker County
- Creel
(22 miles [35.4 km] to the south) - Empire
(22 miles [35.4 km] to the south)- Jump to our Gazetteer entry for Empire
- Empire is located in Walker County
- Black Warrior Town ‑ Historic
(23 miles [37 km] to the south)- Note: The GPS coordinates that we are using for Black Warrior Town have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Black Warrior Town
- Black Warrior Town is located in Walker County
- Red Rock
(23 miles [37 km] to the southwest) - Sipsey
(23 miles [37 km] to the southwest)- Jump to our Gazetteer entry for Sipsey
- Sipsey is located in Walker County
- Population from the 2020 Census: 396 people
- South Lowell
(25 miles [40.2 km] to the southwest)- Note: The GPS coordinates that we are using for South Lowell have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Lowell
- South Lowell is located in Walker County
- Camak Mills ‑ Historic
(26 miles [41.8 km] to the southwest)- Note: The GPS coordinates that we are using for Camak Mills have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Camak Mills
- Camak Mills is located in Walker County
- Sumiton
(27 miles [43.5 km] to the south)- Jump to our Gazetteer entry for Sumiton
- Sumiton is located in Walker County
- Population from the 2020 Census: 2,330 people
- Former names for Sumiton:
- Commercial
- Democrat
- Jump to TripAdvisor's Tourism page for Sumiton <2>
- Dora
(29 miles [46.7 km] to the south)- Jump to our Gazetteer entry for Dora
- Dora is located in Walker County
- Population from the 2020 Census: 1,979 people
- Jump to TripAdvisor's Tourism page for Dora <2>
- Cordova
(29 miles [46.7 km] to the southwest)- Jump to our Gazetteer entry for Cordova
- Cordova is located in Walker County
- Population from the 2020 Census: 1,820 people
- Jump to TripAdvisor's Tourism page for Cordova <2>
- Winston County
- The following are listed by their distance from Grandview, with the one closest to Grandview listed first.
- Addison
(16 miles [25.7 km] to the west)- Jump to our Gazetteer entry for Addison
- Addison is located in Winston County
- Population from the 2020 Census: 717 people
- Jump to TripAdvisor's Tourism page for Addison <2>
- Upshaw
(17 miles [27.4 km] to the northwest)- Jump to our Gazetteer entry for Upshaw
- Upshaw is located in Winston County
- Arley
(17 miles [27.4 km] to the west)- Jump to our Gazetteer entry for Arley
- Arley is located in Winston County
- Population from the 2020 Census: 340 people
- Jump to TripAdvisor's Tourism page for Arley <2>
- Houston
(20 miles [32.2 km] to the west)- Note: The GPS coordinates that we are using for Houston have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Houston
- Houston is located in Winston County
- Jump to TripAdvisor's Tourism page for Houston <2>
- Slick Ford
(20 miles [32.2 km] to the west)- Note: The GPS coordinates that we are using for Slick Ford have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Slick Ford
- Slick Ford is located in Winston County
- Falls City ‑ Historic
(22 miles [35.4 km] to the west)- Note: The GPS coordinates that we are using for Falls City have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Falls City
- Falls City is located in Winston County
- Ellaville
(25 miles [40.2 km] to the west) - Grayson
(26 miles [41.8 km] to the northwest)- Jump to our Gazetteer entry for Grayson
- Grayson is located in Winston County
- Double Springs
(28 miles [45.1 km] to the west)- Jump to our Gazetteer entry for Double Springs
- Double Springs is located in Winston County
- Population from the 2020 Census: 1,062 people
- Jump to TripAdvisor's Tourism page for Double Springs <2>
For an expanded list of the communities that are closest to Grandview, see our County-by-County Page for Grandview.
Newspapers Published in Grandview ...
An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).
To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.
Using information that we've taken from the Chronicling America website, we've identified 27 newspapers that have been published in the area around Grandview.
Although we're unaware of any newspapers that were published in the immediate area of Grandview, there are papers which were published within 21 miles [33.8 km]<3>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Grandview.
Websites to Help With Your Genealogy Research ...
When we do our genealogical research, we begin with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites offer the information directly or else point to where you can find it. Their information is open to everyone.
To help you get started, the following links will take you to the pages that are relevant to Grandview:
- Websites specific to Alabama
- Jump to Cyndi's List
- Jump to Family Search
- Jump to Genealogy Trails
- Website for the Alabama Department of Archives & History
- Pages specific to Cullman County
- Jump to Cyndi's List
- Jump to Family Search
- Jump to Genealogy Trails
- Genealogy information for nearby counties
- Blount County
- Jump to Cyndi's List
- Jump to Family Search
- Jump to Genealogy Trails
- Jefferson County
- Jump to Cyndi's List
- Jump to Family Search
- Jump to Genealogy Trails
- Lawrence County
- Jump to Cyndi's List
- Jump to Family Search
- Jump to Genealogy Trails
- Marshall County
- Jump to Cyndi's List
- Jump to Family Search
- Jump to Genealogy Trails
- Morgan County
- Jump to Cyndi's List
- Jump to Family Search
- Jump to Genealogy Trails
- Walker County
- Jump to Cyndi's List
- Jump to Family Search
- Jump to Genealogy Trails
- Winston County
- Jump to Cyndi's List
- Jump to Family Search
- Jump to Genealogy Trails
- Blount County
- Cemetery Information and Directories for Alabama
- Cemetery Junction: Cemeteries of Alabama
- Cyndi's List
- Cemeteries of Alabama
- Cemeteries of Cullman County
- FamilySearch.org: Cemeteries of Alabama
- Find-A-Grave: Home Page
- Interment.net
- Cemeteries of Alabama
- Cemeteries of Cullman County
Cemeteries Near Grandview ...
Below are cemeteries that are in the vicinity of Grandview.
This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.
If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).
If not found below, our Cemetery List for Grandview covers a larger area, with the cemeteries listed in alphabetical order.
The following cemeteries are listed based on their distance from Grandview, with the one closest to Grandview listed first.
- Bethsaida Baptist Church Cemetery
(Less than 2 miles to the north)- The Bethsaida Baptist Church Cemetery has also been known as:
- Bethsadia Cemetery
- Jump to our Gazetteer entry for the Bethsaida Baptist Church Cemetery
- Jump to Find-A-Grave: FG ID #21586 <4>
- Good Hope Cemetery
(2 miles [3.2 km] to the southeast)- Note: The GPS coordinates that we are using for the Good Hope Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for the Good Hope Cemetery
- Pullen Cemetery
(2 miles [3.2 km] to the northwest)- Note: The GPS coordinates that we are using for the Pullen Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for the Pullen Cemetery
- Hartwic Cemetery
(2 miles [3.2 km] to the west)- Note: The GPS coordinates that we are using for the Hartwic Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for the Hartwic Cemetery
- Shedd Cemetery
(3 miles [4.8 km] to the southwest)- Note: The GPS coordinates that we are using for the Shedd Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for the Shedd Cemetery
- Sharon Grove Cemetery
(3 miles [4.8 km] to the southwest)- Note: The GPS coordinates that we are using for the Sharon Grove Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for the Sharon Grove Cemetery
- Spitznagl Cemetery
(3 miles [4.8 km] to the north)- Note: The GPS coordinates that we are using for the Spitznagl Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for the Spitznagl Cemetery
- Bowmans Chapel Cemetery
(4 miles [6.4 km] to the southwest)- Note: The GPS coordinates that we are using for the Bowmans Chapel Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for the Bowmans Chapel Cemetery
- Valley Springs Cemetery
(4 miles [6.4 km] to the south)- Note: The GPS coordinates that we are using for the Valley Springs Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for the Valley Springs Cemetery
- Bethlehem Cemetery
(4 miles [6.4 km] to the south)- Note: The GPS coordinates that we are using for the Bethlehem Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for the Bethlehem Cemetery
- Cullman City Cemetery
(4 miles [6.4 km] to the northeast)- Note: The GPS coordinates that we are using for the Cullman City Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for the Cullman City Cemetery
- Baldwin Chapel Cemetery
(4 miles [6.4 km] to the north)- Note: The GPS coordinates that we are using for the Baldwin Chapel Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for the Baldwin Chapel Cemetery
- Continue List (533 more) ...
- Baldwin Heights Cemetery
(4 miles [6.4 km] to the north)- Note: The GPS coordinates that we are using for the Baldwin Heights Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for the Baldwin Heights Cemetery
- Mountain Grove Cemetery
(5 miles [8 km] to the southeast)- Note: The GPS coordinates that we are using for the Mountain Grove Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for the Mountain Grove Cemetery
- Sacred Heart Cemetery
(5 miles [8 km] to the northeast)- Jump to our Gazetteer entry for the Sacred Heart Cemetery
- Baldwin Heights Cemetery
Nearby Communities in 1895 ...
We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<5>
While we didn't find Grandview in the Atlas, the following 1895 communities would have been found near the current location of Grandview.
These communities are listed based on their distance from Grandview, with the one closest to Grandview listed first.
- Trimble
(3 miles [4.8 km] to the southwest)- Jump to our Gazetteer entry for Trimble
- Trimble is located in Cullman County
- Baldwin
(4 miles [6.4 km] to the north) - Phelan
(5 miles [8 km] to the east) - Cullman
(5 miles [8 km] to the northeast)- Note: The GPS coordinates that we are using for Cullman have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cullman
- Cullman is located in Cullman County
- Population from the 2020 Census: 16,564 people
- Jump to TripAdvisor's Tourism page for Cullman <2>
- Logan
(5 miles [8 km] to the west)- Note: The GPS coordinates that we are using for Logan have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Logan
- Logan is located in Cullman County
- Jump to TripAdvisor's Tourism page for Logan <2>
- Crane Hill
(9 miles [14.5 km] to the west)- Jump to our Gazetteer entry for Crane Hill
- Crane Hill is located in Cullman County
- Jump to TripAdvisor's Tourism page for Crane Hill <2>
- Bremen
(9 miles [14.5 km] to the south)- Jump to our Gazetteer entry for Bremen
- Bremen is located in Cullman County
- Jump to TripAdvisor's Tourism page for Bremen <2>
- Jones' Chapel
(10 miles [16.1 km] to the northwest)- Jump to our Gazetteer entry for Jones' Chapel
- Jones' Chapel is located in Cullman County
- Garden City
(11 miles [17.7 km] to the southeast)- Jump to our Gazetteer entry for Garden City
- Garden City is located in Cullman County
- Population from the 2020 Census: 506 people
- Simcoe
(11 miles [17.7 km] to the northeast) - Wilhites
(12 miles [19.3 km] to the north) - Nesmith
(12 miles [19.3 km] to the west) - Continue List (13 more) ...
- Bangor
(13 miles [20.9 km] to the southeast)- Jump to our Gazetteer entry for Bangor
- Bangor is located in Blount County
- Battleground
(13 miles [20.9 km] to the northwest)- Note: The GPS coordinates that we are using for Battleground have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Battleground
- Battleground is located in Cullman County
- Walter
(13 miles [20.9 km] to the east)
- Bangor
We've also created an expanded list of communities that existed in the 1890's and were located in the area around Grandview. See our List of 1890's Communities around Grandview.
Off-the-Road Links ...
Unfortunately, we don't know of a website for Grandview. If you can help, please contact us through our Feedback Page.
The official website for Cullman County: www.co.cullman.al.us/
The official website for State of Alabama: https://www.alabama.gov/
Footnotes ...
| <1> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <3> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Grandview) to Point B.Our distance measurements begin at a specific point in Grandview. The point we use is located at these GPS coordinates - Latitude: 34.1276, Longitude: -86.9061 In this case, the coordinates for Grandview have been provided by the Geographic Names Information System (GNIS). |
| <4> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
| <5> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Grandview, please let us know so that we can improve our accuracy. |