|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that in 1895, Gamble had railroad service and no post office.
The following communities are listed based on their distance from Gamble, with the one closest to Gamble listed first.
- Edgil
(Less than 2 miles to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Edgil. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Edgil
- Edgil is located in Walker County
- Google driving directions:
- From your current location to Edgil
- From Gamble to Edgil
- Saragossa
(3 miles [4.8 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Saragossa. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Saragossa
- Saragossa is located in Walker County
- Google driving directions:
- From your current location to Saragossa
- From Gamble to Saragossa
- Jasper
(4 miles [6.4 km] to the southeast)
- South Lowell
(4 miles [6.4 km] to the northeast)
- Townley
(6 miles [9.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Townley have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Townley
- Townley is located in Walker County
- Prospect
(7 miles [11.3 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Prospect. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Prospect
- Prospect is located in Walker County
- Google driving directions:
- From your current location to Prospect
- From Gamble to Prospect
- Coal Valley
(10 miles [16.1 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Coal Valley. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Coal Valley
- Coal Valley is located in Walker County
- Google driving directions:
- From your current location to Coal Valley
- From Gamble to Coal Valley
- Parrish
(10 miles [16.1 km] to the south)
- Marylee
(10 miles [16.1 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Marylee. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Marylee
- Marylee is located in Walker County
- Google driving directions:
- From your current location to Marylee
- From Gamble to Marylee
- Cordova
(11 miles [17.7 km] to the southeast)
- Nauvoo
(11 miles [17.7 km] to the northwest)
- Carbon Hill
(11 miles [17.7 km] to the west)
- Ashbank
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Ashbank have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ashbank
- Ashbank is located in Winston County
- Kansas
(12 miles [19.3 km] to the west)
- Patton
(13 miles [20.9 km] to the southwest)
- Powellville
(13 miles [20.9 km] to the east)
- Corona
(14 miles [22.5 km] to the southwest)
- Ardell
(15 miles [24.1 km] to the northeast)
- Lynn
(16 miles [25.7 km] to the northwest)
- Eldridge
(16 miles [25.7 km] to the west)
- Dora
(17 miles [27.4 km] to the southeast)
- Double Springs
(18 miles [29 km] to the north)
- Alta
(18 miles [29 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Alta. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Alta
- Alta is located in Fayette County
- Google driving directions:
- From your current location to Alta
- From Gamble to Alta
- Houston
(18 miles [29 km] to the north)
- Note: The GPS coordinates that we are using for Houston have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Houston
- Houston is located in Winston County
- Jump to TripAdvisor's Tourism page for Houston <3>
- Texas
(20 miles [32.2 km] to the west)
- Note: The GPS coordinates that we are using for Texas have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Texas
- Texas is located in Marion County
Off-the-Road Links ...
The official website for Walker County: www.walkercounty.com/ The official website for State of Alabama: https://www.alabama.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Gamble, please let us know so that we can improve our accuracy. |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|