Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Sedan had a population of 38 people in 1895 with a post office and no railroad service.
The following communities are listed based on their distance from Sedan, with the one closest to Sedan listed first.
- Millbrook
(Less than 2 miles to the southeast)
- Note: The GPS coordinates that we are using for Millbrook have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Millbrook
- Millbrook is located in Hampshire County
- Delray
(3 miles [4.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Delray have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Delray
- Delray is located in Hampshire County
- Jump to TripAdvisor's Tourism page for Delray <3>
- Dillons Run ‑ Historic
(3 miles [4.8 km] to the east)
- Note: The GPS coordinates that we are using for Dillons Run have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dillons Run
- Dillons Run is located in Hampshire County
- Pleasantdale
(4 miles [6.4 km] to the north)
- Note: The GPS coordinates that we are using for Pleasantdale have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pleasantdale
- Pleasantdale is located in Hampshire County
- Yellow Spring
(4 miles [6.4 km] to the southeast)
- Hooks Mills
(5 miles [8 km] to the east)
- Note: The GPS coordinates that we are using for Hooks Mills have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hooks Mills
- Hooks Mills is located in Hampshire County
- Augusta
(5 miles [8 km] to the northwest)
- Ruckman
(6 miles [9.7 km] to the west)
- Note: The GPS coordinates that we are using for Ruckman have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ruckman
- Ruckman is located in Hampshire County
- Lehew
(7 miles [11.3 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Lehew. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Lehew
- Lehew is located in Hampshire County
- Google driving directions:
- From your current location to Lehew
- From Sedan to Lehew
- North River Mills
(7 miles [11.3 km] to the northeast)
- Rio
(8 miles [12.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Rio have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rio
- Rio is located in Hampshire County
- Capon Springs
(8 miles [12.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Capon Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Capon Springs
- Capon Springs is located in Hampshire County
- Jump to TripAdvisor's Tourism page for Capon Springs <3>
- Barnes Mill
(8 miles [12.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Barnes Mill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Barnes Mill
- Barnes Mill is located in Hampshire County
- Capon Bridge
(8 miles [12.9 km] to the northeast)
- Kirby
(9 miles [14.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Kirby have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kirby
- Kirby is located in Hampshire County
- Cold Stream
(9 miles [14.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Cold Stream have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cold Stream
- Cold Stream is located in Hampshire County
- Slanesville
(9 miles [14.5 km] to the north)
- Rock Enon Springs
(10 miles [16.1 km] to the east)
- Wardensville
(11 miles [17.7 km] to the south)
- Inkerman
(12 miles [19.3 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Inkerman. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Inkerman
- Inkerman is located in Hardy County
- Google driving directions:
- From your current location to Inkerman
- From Sedan to Inkerman
- Higginsville
(12 miles [19.3 km] to the north)
- Three Churches
(12 miles [19.3 km] to the north)
- Mountain Falls
(12 miles [19.3 km] to the southeast)
- Gore
(12 miles [19.3 km] to the east)
- Note: The GPS coordinates that we are using for Gore have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gore
- Gore is located in Frederick County (VA)
- Jump to TripAdvisor's Tourism page for Gore <3>
- Romney
(12 miles [19.3 km] to the northwest)
Off-the-Road Links ...
The official website for State of West Virginia: https://www.wv.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Sedan, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |