RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of West Virginia >> Ritchie County >> Cisco >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
West Virginia

The Commemorative Quarter for West Virginia





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Cisco (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Cisco. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the northwest corner of their home county. During their lives, most hospitals and doctors were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the north.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the west contained birth and death records; the county to the north contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Cisco is located in Ritchie County.

To see how the shape of West Virginia's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Ritchie County: Calhoun, Doddridge, Gilmer, Pleasants, Tyler, Wirt & Wood.

Below are the counties that are near Cisco. For each of these counties, we show a sample of those communities that are closest to Cisco:

  • Ritchie County     (The home county of Cisco)
    • The following are listed by their distance from Cisco, with the one closest to Cisco listed first.
    • Rusk
      (2 miles [3.2 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Rusk. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Rusk
      • Rusk is located in Ritchie County
      • Google driving directions:
      • From your current location to Rusk
      • From Cisco to Rusk
    • Petroleum
      (4 miles [6.4 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Petroleum. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Petroleum
      • Petroleum is located in Ritchie County
      • Google driving directions:
      • From your current location to Petroleum
      • From Cisco to Petroleum
    • Oxbow
      (4 miles [6.4 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Oxbow. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Oxbow
      • Oxbow is located in Ritchie County
      • Google driving directions:
      • From your current location to Oxbow
      • From Cisco to Oxbow
    • Cantwell
      (8 miles [12.9 km] to the east)
    • Cairo
      (8 miles [12.9 km] to the northeast)
    • Cokeleys
      (9 miles [14.5 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Cokeleys. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Cokeleys
      • Cokeleys is located in Ritchie County
      • Google driving directions:
      • From your current location to Cokeleys
      • From Cisco to Cokeleys
    • Smithville
      (10 miles [16.1 km] to the east)
    • Cornwallis
      (10 miles [16.1 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Cornwallis. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Cornwallis
      • Cornwallis is located in Ritchie County
      • Google driving directions:
      • From your current location to Cornwallis
      • From Cisco to Cornwallis
    • Harrisville
      (13 miles [20.9 km] to the northeast)
      • Note: The GPS coordinates that we are using for Harrisville have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Harrisville
      • Harrisville is located in Ritchie County
      • Population from the 2020 Census: 1,664 people
      • Jump to TripAdvisor's Tourism page for Harrisville <2>
    • Ellenboro
      (15 miles [24.1 km] to the northeast)
    • Hannahdale
      (15 miles [24.1 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Hannahdale. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Hannahdale
      • Hannahdale is located in Ritchie County
      • Google driving directions:
      • From your current location to Hannahdale
      • From Cisco to Hannahdale
    • League
      (15 miles [24.1 km] to the northeast)
    • Burnt House
      (16 miles [25.7 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Burnt House. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Burnt House
      • Burnt House is located in Ritchie County
      • Google driving directions:
      • From your current location to Burnt House
      • From Cisco to Burnt House
  • Calhoun County
    • The following are listed by their distance from Cisco, with the one closest to Cisco listed first.
    • Freed
      (11 miles [17.7 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Freed. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Freed
      • Freed is located in Calhoun County
      • Google driving directions:
      • From your current location to Freed
      • From Cisco to Freed
    • Bigbend
      (13 miles [20.9 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Bigbend. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Bigbend
      • Bigbend is located in Calhoun County
      • Google driving directions:
      • From your current location to Bigbend
      • From Cisco to Bigbend
    • Grantsville
      (17 miles [27.4 km] to the southeast)
    • Hur
      (18 miles [29 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Hur. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Hur
      • Hur is located in Calhoun County
      • Google driving directions:
      • From your current location to Hur
      • From Cisco to Hur
    • Rocksdale
      (19 miles [30.6 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Rocksdale. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Rocksdale
      • Rocksdale is located in Calhoun County
      • Google driving directions:
      • From your current location to Rocksdale
      • From Cisco to Rocksdale
    • Russet
      (21 miles [33.8 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Russet. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Russet
      • Russet is located in Calhoun County
      • Google driving directions:
      • From your current location to Russet
      • From Cisco to Russet
    • Staten
      (21 miles [33.8 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Staten. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Staten
      • Staten is located in Calhoun County
      • Google driving directions:
      • From your current location to Staten
      • From Cisco to Staten
    • Pink
      (23 miles [37 km] to the south)
    • Arnoldsburg
      (24 miles [38.6 km] to the south)
    • Beech
      (25 miles [40.2 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Beech. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Beech
      • Beech is located in Calhoun County
      • Google driving directions:
      • From your current location to Beech
      • From Cisco to Beech
    • Orma
      (27 miles [43.5 km] to the south)
    • Gomez ‑ Historic
      (28 miles [45.1 km] to the southeast)
      • Note: The GPS coordinates that we are using for Gomez have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Gomez
      • Gomez is located in Calhoun County
  • Doddridge County
    • The following are listed by their distance from Cisco, with the one closest to Cisco listed first.
    • Duckworth
      (24 miles [38.6 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Duckworth. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Duckworth
      • Duckworth is located in Doddridge County
      • Google driving directions:
      • From your current location to Duckworth
      • From Cisco to Duckworth
    • Grove
      (27 miles [43.5 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Grove. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Grove
      • Grove is located in Doddridge County
      • Google driving directions:
      • From your current location to Grove
      • From Cisco to Grove
    • West Union
      (29 miles [46.7 km] to the northeast)
  • Gilmer County
  • Jackson County
    • The following are listed by their distance from Cisco, with the one closest to Cisco listed first.
    • Garfield
      (18 miles [29 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Garfield. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Garfield
      • Garfield is located in Jackson County
      • Google driving directions:
      • From your current location to Garfield
      • From Cisco to Garfield
    • Liverpool
      (20 miles [32.2 km] to the southwest)
    • Medina
      (20 miles [32.2 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Medina. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Medina
      • Medina is located in Jackson County
      • Google driving directions:
      • From your current location to Medina
      • From Cisco to Medina
    • Browning ‑ Historic
      (21 miles [33.8 km] to the west)
      • Note: The GPS coordinates that we are using for Browning have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Browning
      • Browning is located in Jackson County
    • Willowdale
      (22 miles [35.4 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Willowdale. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Willowdale
      • Willowdale is located in Jackson County
      • Google driving directions:
      • From your current location to Willowdale
      • From Cisco to Willowdale
    • Meadowdale
      (23 miles [37 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Meadowdale. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Meadowdale
      • Meadowdale is located in Jackson County
      • Google driving directions:
      • From your current location to Meadowdale
      • From Cisco to Meadowdale
    • Odaville
      (23 miles [37 km] to the southwest)
    • Wilding
      (24 miles [38.6 km] to the southwest)
    • Sandyville
      (25 miles [40.2 km] to the southwest)
    • Neptune
      (26 miles [41.8 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Neptune. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Neptune
      • Neptune is located in Jackson County
      • Google driving directions:
      • From your current location to Neptune
      • From Cisco to Neptune
    • Skull Run
      (26 miles [41.8 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Skull Run. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Skull Run
      • Skull Run is located in Jackson County
      • Google driving directions:
      • From your current location to Skull Run
      • From Cisco to Skull Run
    • Hereford
      (27 miles [43.5 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Hereford. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Hereford
      • Hereford is located in Jackson County
      • Google driving directions:
      • From your current location to Hereford
      • From Cisco to Hereford
    • Sherman
      (27 miles [43.5 km] to the west)
  • Pleasants County
    • The following are listed by their distance from Cisco, with the one closest to Cisco listed first.
    • Horseneck
      (13 miles [20.9 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Horseneck. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Horseneck
      • Horseneck is located in Pleasants County
      • Google driving directions:
      • From your current location to Horseneck
      • From Cisco to Horseneck
    • Schultz
      (13 miles [20.9 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Schultz. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Schultz
      • Schultz is located in Pleasants County
      • Google driving directions:
      • From your current location to Schultz
      • From Cisco to Schultz
    • Willow Island
      (16 miles [25.7 km] to the north)
    • Belmont
      (17 miles [27.4 km] to the north)
      • Note: The GPS coordinates that we are using for Belmont have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Belmont
      • Belmont is located in Pleasants County
      • Population from the 2020 Census: 853 people
    • Saint Marys
      (18 miles [29 km] to the north)
      • Note: The GPS coordinates that we are using for Saint Marys have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Saint Marys
      • Saint Marys is located in Pleasants County
      • Population from the 2020 Census: 1,757 people
      • Jump to TripAdvisor's Tourism page for Saint Marys <2>
    • Adlai
      (18 miles [29 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Adlai. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Adlai
      • Adlai is located in Pleasants County
      • Google driving directions:
      • From your current location to Adlai
      • From Cisco to Adlai
    • DeLong
      (20 miles [32.2 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for DeLong. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for DeLong
      • DeLong is located in Pleasants County
      • Google driving directions:
      • From your current location to DeLong
      • From Cisco to DeLong
    • Hebron
      (21 miles [33.8 km] to the northeast)
    • Sugar Valley
      (22 miles [35.4 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Sugar Valley. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Sugar Valley
      • Sugar Valley is located in Pleasants County
      • Google driving directions:
      • From your current location to Sugar Valley
      • From Cisco to Sugar Valley
  • Roane County
    • The following are listed by their distance from Cisco, with the one closest to Cisco listed first.
    • Millard
      (17 miles [27.4 km] to the south)
      • Note: The GPS coordinates that we are using for Millard have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Millard
      • Millard is located in Roane County
    • Reedy
      (17 miles [27.4 km] to the southwest)
      • Note: The GPS coordinates that we are using for Reedy have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Reedy
      • Reedy is located in Roane County
      • Population from the 2020 Census: 159 people
    • Triplett
      (19 miles [30.6 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Triplett. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Triplett
      • Triplett is located in Roane County
      • Google driving directions:
      • From your current location to Triplett
      • From Cisco to Triplett
    • Spencer
      (22 miles [35.4 km] to the south)
    • Graux
      (25 miles [40.2 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Graux. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Graux
      • Graux is located in Roane County
      • Google driving directions:
      • From your current location to Graux
      • From Cisco to Graux
    • Flint Town
      (28 miles [45.1 km] to the southwest)
      • Note: The GPS coordinates that we are using for Flint Town have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Flint Town
      • Flint Town is located in Roane County
    • Roxalana
      (29 miles [46.7 km] to the south)
    • Rushville
      (29 miles [46.7 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Rushville. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Rushville
      • Rushville is located in Roane County
      • Google driving directions:
      • From your current location to Rushville
      • From Cisco to Rushville
    • Zona
      (29 miles [46.7 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Zona. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Zona
      • Zona is located in Roane County
      • Google driving directions:
      • From your current location to Zona
      • From Cisco to Zona
  • Tyler County
    • The following are listed by their distance from Cisco, with the one closest to Cisco listed first.
    • Plum Run
      (22 miles [35.4 km] to the northeast)
    • McKim
      (24 miles [38.6 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for McKim. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for McKim
      • McKim is located in Tyler County
      • Google driving directions:
      • From your current location to McKim
      • From Cisco to McKim
    • Meadville
      (24 miles [38.6 km] to the northeast)
    • Friendly
      (29 miles [46.7 km] to the northeast)
    • Adonis
      (30 miles [48.3 km] to the northeast)
  • Wirt County
  • Wood County
    • The following are listed by their distance from Cisco, with the one closest to Cisco listed first.
    • Leachtown
      (8 miles [12.9 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Leachtown. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Leachtown
      • Leachtown is located in Wood County
      • Google driving directions:
      • From your current location to Leachtown
      • From Cisco to Leachtown
    • Slate
      (8 miles [12.9 km] to the west)
    • Dallison
      (10 miles [16.1 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Dallison. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Dallison
      • Dallison is located in Wood County
      • Google driving directions:
      • From your current location to Dallison
      • From Cisco to Dallison
    • Kanawha
      (10 miles [16.1 km] to the northwest)
    • Mineral Acres
      (12 miles [19.3 km] to the west)
    • Mineral Wells
      (12 miles [19.3 km] to the west)
    • Valley Mills
      (15 miles [24.1 km] to the northwest)
    • Parkers Towne
      (16 miles [25.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Parkers Towne have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Parkers Towne
      • Parkers Towne is located in Wood County
    • Pleasant View
      (16 miles [25.7 km] to the west)
    • North Hills
      (17 miles [27.4 km] to the northwest)
      • Note: The GPS coordinates that we are using for North Hills have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for North Hills
      • North Hills is located in Wood County
      • Population from the 2020 Census: 766 people
    • Parkersburg
      (17 miles [27.4 km] to the northwest)
    • Vienna
      (18 miles [29 km] to the northwest)
      • Note: The GPS coordinates that we are using for Vienna have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Vienna
      • Vienna is located in Wood County
      • Population from the 2020 Census: 10,028 people
      • Jump to TripAdvisor's Tourism page for Vienna <2>
    • Blennerhassett
      (20 miles [32.2 km] to the northwest)
      • Note: The GPS coordinates that we are using for Blennerhassett have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Blennerhassett
      • Blennerhassett is located in Wood County
  • Athens County (OH)
  • Meigs County (OH)
  • Washington County (OH)
    • The following are listed by their distance from Cisco, with the one closest to Cisco listed first.
    • Newell Run
      (17 miles [27.4 km] to the north)
    • Yankeeburg
      (17 miles [27.4 km] to the north)
    • Sandhill
      (18 miles [29 km] to the north)
    • Belpre
      (19 miles [30.6 km] to the northwest)
    • Rockland
      (20 miles [32.2 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Rockland. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Rockland
      • Rockland is located in Washington County (OH)
      • Google driving directions:
      • From your current location to Rockland
      • From Cisco to Rockland
    • Harmar
      (21 miles [33.8 km] to the northwest)
    • Marietta
      (21 miles [33.8 km] to the northwest)
    • Wade
      (22 miles [35.4 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Wade. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Wade
      • Wade is located in Washington County (OH)
      • Google driving directions:
      • From your current location to Wade
      • From Cisco to Wade
    • Porterfield
      (22 miles [35.4 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Porterfield. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Porterfield
      • Porterfield is located in Washington County (OH)
      • Google driving directions:
      • From your current location to Porterfield
      • From Cisco to Porterfield
    • Deucher
      (23 miles [37 km] to the north)
    • Corner
      (23 miles [37 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Corner. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Corner
      • Corner is located in Washington County (OH)
      • Google driving directions:
      • From your current location to Corner
      • From Cisco to Corner
    • Oak Grove
      (24 miles [38.6 km] to the northwest)
    • Redbush
      (24 miles [38.6 km] to the northwest)

For an expanded list of the communities that are closest to Cisco, see our County-by-County Page for Cisco.

Cemeteries Near Cisco ...

Below are cemeteries that are in the vicinity of Cisco.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Cisco covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Cisco, with the one closest to Cisco listed first.

  • Beckner Cemetery
    (Less than 2 miles to the north)
    • Jump to our Gazetteer entry for the Beckner Cemetery
    • Note: The GPS coordinates that we are using for the Beckner Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
  • Mason Cemetery
    (2 miles [3.2 km] to the east)
    • Jump to our Gazetteer entry for the Mason Cemetery
    • Note: The GPS coordinates that we are using for the Mason Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
  • Freeport Cemetery
    (2 miles [3.2 km] to the west)
    • Jump to our Gazetteer entry for the Freeport Cemetery
    • Note: The GPS coordinates that we are using for the Freeport Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
  • Pine Twist Cemetery
    (3 miles [4.8 km] to the south)
    • Jump to our Gazetteer entry for the Pine Twist Cemetery
    • Note: The GPS coordinates that we are using for the Pine Twist Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
  • Nutter Cemetery
    (3 miles [4.8 km] to the southeast)
    • Jump to our Gazetteer entry for the Nutter Cemetery
    • Note: The GPS coordinates that we are using for the Nutter Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
  • Heck Cemetery
    (4 miles [6.4 km] to the east)
    • Jump to our Gazetteer entry for the Heck Cemetery
    • Note: The GPS coordinates that we are using for the Heck Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
  • Swisher Cemetery
    (4 miles [6.4 km] to the northeast)
    • Jump to our Gazetteer entry for the Swisher Cemetery
    • Note: The GPS coordinates that we are using for the Swisher Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
  • Mt. Olive Cemetery
    (4 miles [6.4 km] to the northwest)
  • Farr Cemetery
    (4 miles [6.4 km] to the northwest)
    • Jump to our Gazetteer entry for the Farr Cemetery
    • Note: The GPS coordinates that we are using for the Farr Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
  • Greenhill Catholic Cemetery
    (5 miles [8 km] to the north)
    • Jump to our Gazetteer entry for the Greenhill Catholic Cemetery
    • Note: The GPS coordinates that we are using for the Greenhill Catholic Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
  • Everly Cemetery
    (5 miles [8 km] to the northwest)
    • Jump to our Gazetteer entry for the Everly Cemetery
    • Note: The GPS coordinates that we are using for the Everly Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
  • Metz Cemetery
    (5 miles [8 km] to the northeast)
    • Jump to our Gazetteer entry for the Metz Cemetery
    • Note: The GPS coordinates that we are using for the Metz Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
  • Continue List   (672 more) ...
    • Mt. Carmel Cemetery
      (5 miles [8 km] to the northwest)
      • Jump to our Gazetteer entry for the Mt. Carmel Cemetery
      • Note: The GPS coordinates that we are using for the Mt. Carmel Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Fought Cemetery
      (5 miles [8 km] to the west)
    • Wells - Seaton Cemetery
      (6 miles [9.7 km] to the west)
      • Jump to our Gazetteer entry for the Wells - Seaton Cemetery
      • Note: The GPS coordinates that we are using for the Wells - Seaton Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<5>

The Rand McNally Atlas shows that in 1895, Cisco had a post office and no railroad service.

These communities are listed based on their distance from Cisco, with the one closest to Cisco listed first.

  • Rusk
    (2 miles [3.2 km] to the northeast)
    • Note: We haven't been able to verify our GPS coordinates for Rusk. Although the coordinates have been estimated, they should be in the vicinity.<1>
    • Jump to our Gazetteer entry for Rusk
    • Rusk is located in Ritchie County
    • Google driving directions:
    • From your current location to Rusk
    • From Cisco to Rusk
  • Freeport
    (3 miles [4.8 km] to the west)
  • Oxbow
    (4 miles [6.4 km] to the southeast)
    • Note: We haven't been able to verify our GPS coordinates for Oxbow. Although the coordinates have been estimated, they should be in the vicinity.<1>
    • Jump to our Gazetteer entry for Oxbow
    • Oxbow is located in Ritchie County
    • Google driving directions:
    • From your current location to Oxbow
    • From Cisco to Oxbow
  • Petroleum
    (4 miles [6.4 km] to the north)
    • Note: We haven't been able to verify our GPS coordinates for Petroleum. Although the coordinates have been estimated, they should be in the vicinity.<1>
    • Jump to our Gazetteer entry for Petroleum
    • Petroleum is located in Ritchie County
    • Google driving directions:
    • From your current location to Petroleum
    • From Cisco to Petroleum
  • Eaton
    (5 miles [8 km] to the north)
    • Note: The GPS coordinates that we are using for Eaton have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Eaton
    • Eaton is located in Wood County
  • Walker
    (6 miles [9.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Walker have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Walker
    • Walker is located in Wood County
  • Newark
    (6 miles [9.7 km] to the west)
  • Elizabeth
    (7 miles [11.3 km] to the southwest)
  • Cantwell
    (8 miles [12.9 km] to the east)
  • Hartley
    (8 miles [12.9 km] to the east)
    • Note: The GPS coordinates that we are using for Hartley have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hartley
    • Hartley is located in Ritchie County
  • Cairo
    (8 miles [12.9 km] to the northeast)
  • Nutter Farm
    (8 miles [12.9 km] to the north)
    • Note: The GPS coordinates that we are using for Nutter Farm have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Nutter Farm
    • Nutter Farm is located in Ritchie County
  • Continue List   (16 more) ...
    • Leachtown
      (8 miles [12.9 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Leachtown. Although the coordinates have been estimated, they should be in the vicinity.<1>
      • Jump to our Gazetteer entry for Leachtown
      • Leachtown is located in Wood County
      • Google driving directions:
      • From your current location to Leachtown
      • From Cisco to Leachtown
    • Slate
      (8 miles [12.9 km] to the west)
    • Deerwalk
      (9 miles [14.5 km] to the north)
      • Note: The GPS coordinates that we are using for Deerwalk have been provided by the GNIS.<3> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Deerwalk
      • Deerwalk is located in Wood County

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Cisco. See our List of 1890's Communities around Cisco.

Newspapers Published in Cisco ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 17 newspapers that have been published in the area around Cisco.

Although we're unaware of any newspapers that were published in the immediate area of Cisco, there are papers which were published within 13 miles [20.9 km]<6>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Cisco.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we first turn to the websites from Cyndi's List, FamilySearch and Genealogy Trails. These helpful websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Cisco:

Unfortunately, we don't know of a website for Cisco. If you can help, please contact us through our Feedback Page.

The official website for State of West Virginia: https://www.wv.gov/

Footnotes ...

<1>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<4>The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com.
<5>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Cisco, please let us know so that we can improve our accuracy.
<6>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Cisco) to Point B.Our distance measurements begin at a specific point in Cisco. The point we use is located at these GPS coordinates - Latitude: 39.1267, Longitude: -81.2837       In this case, the coordinates for Cisco have been provided by the Geographic Names Information System (GNIS).




 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 31 Mar 2025