Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Hotts Chapel Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Hotts Chapel Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Hotts Chapel Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Augusta
(7 miles [11.3 km] to the northeast)- Jump to our Gazetteer entry for Augusta
- Augusta is located in Hampshire County
- Jump to TripAdvisor's Tourism page for Augusta <2>
- Sedan
(8 miles [12.9 km] to the east) - Junction
(9 miles [14.5 km] to the northwest)- Jump to our Gazetteer entry for Junction
- Junction is located in Hampshire County
- Romney
(9 miles [14.5 km] to the north)- Jump to our Gazetteer entry for Romney
- Romney is located in Hampshire County
- Population from the 2020 Census: 1,680 people
- Jump to TripAdvisor's Tourism page for Romney <2>
- Vance
(11 miles [17.7 km] to the north) - Baker
(11 miles [17.7 km] to the south)- Jump to our Gazetteer entry for Baker
- Baker is located in Hardy County
- Wardensville
(11 miles [17.7 km] to the southeast)- Jump to our Gazetteer entry for Wardensville
- Wardensville is located in Hardy County
- Population from the 2020 Census: 258 people
- Jump to TripAdvisor's Tourism page for Wardensville <2>
- Wapocomo
(12 miles [19.3 km] to the north) - Yellow Spring
(12 miles [19.3 km] to the east)- Jump to our Gazetteer entry for Yellow Spring
- Yellow Spring is located in Hampshire County
- Jump to TripAdvisor's Tourism page for Yellow Spring <2>
- Three Churches
(13 miles [20.9 km] to the north)- Jump to our Gazetteer entry for Three Churches
- Three Churches is located in Hampshire County
- Burlington
(13 miles [20.9 km] to the northwest)- Jump to our Gazetteer entry for Burlington
- Burlington is located in Mineral County
- Jump to TripAdvisor's Tourism page for Burlington <2>
- Fort Run
(14 miles [22.5 km] to the southwest)- Jump to our Gazetteer entry for Fort Run
- Fort Run is located in Hardy County
- Headsville
(14 miles [22.5 km] to the northwest)- Note: The GPS coordinates that we are using for Headsville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Headsville
- Headsville is located in Mineral County
- Ritters
(14 miles [22.5 km] to the north)- Jump to our Gazetteer entry for Ritters
- Ritters is located in Hampshire County
- Lehew
(15 miles [24.1 km] to the east) - Lehew
(15 miles [24.1 km] to the east) - North River Mills
(15 miles [24.1 km] to the northeast)- Note: The GPS coordinates that we are using for North River Mills have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North River Mills
- North River Mills is located in Hampshire County
- Slanesville
(15 miles [24.1 km] to the northeast)- Jump to our Gazetteer entry for Slanesville
- Slanesville is located in Hampshire County
- Moorefield
(16 miles [25.7 km] to the southwest)- Jump to our Gazetteer entry for Moorefield
- Moorefield is located in Hardy County
- Population from the 2020 Census: 2,391 people
- Jump to TripAdvisor's Tourism page for Moorefield <2>
- Springfield
(16 miles [25.7 km] to the north)- Jump to our Gazetteer entry for Springfield
- Springfield is located in Hampshire County
- Jump to TripAdvisor's Tourism page for Springfield <2>
- Capon Bridge
(17 miles [27.4 km] to the east)- Note: The GPS coordinates that we are using for Capon Bridge have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Capon Bridge
- Capon Bridge is located in Hampshire County
- Population from the 2020 Census: 371 people
- Jump to TripAdvisor's Tourism page for Capon Bridge <2>
- Points
(17 miles [27.4 km] to the north)- Jump to our Gazetteer entry for Points
- Points is located in Hampshire County
- Medley
(17 miles [27.4 km] to the west)- Jump to our Gazetteer entry for Medley
- Medley is located in Grant County
- Jump to TripAdvisor's Tourism page for Medley <2>
- Zepp
(18 miles [29 km] to the southeast) - Lahmansville
(19 miles [30.6 km] to the west)- Note: The GPS coordinates that we are using for Lahmansville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lahmansville
- Lahmansville is located in Grant County
- Mountain Falls
(19 miles [30.6 km] to the east)- Note: The GPS coordinates that we are using for Mountain Falls have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mountain Falls
- Mountain Falls is located in Frederick County (VA)
- New Creek
(19 miles [30.6 km] to the northwest)- Jump to our Gazetteer entry for New Creek
- New Creek is located in Mineral County
- Jump to TripAdvisor's Tourism page for New Creek <2>
Off-the-Road Links ...
The official website for State of West Virginia: https://www.wv.gov/
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Hotts Chapel Cemetery. The point we use is located at these GPS coordinates - Latitude: 39.2098, Longitude: -78.7339 In this case, the coordinates for the Hotts Chapel Cemetery have been provided by the Geographic Names Information System (GNIS). |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |