A Gazetteer for the United States and Canada

Town of Peck, Wisconsin

Nearby Census Genealogy
Cemeteries Tidbits &
Other WI

Census Data for Peck ...

Population ...

The most recent Census Estimate<1> was for 2019 and it gave Peck a population of 338 people.

The last Decennial Census<2> was in 2010, which gave Peck a population of 349 people.

The community of Peck is located in Langlade County. The 2010 Census gave Langlade County; a population of 19,977 people. This means that Peck had 1.75% of the county's total population, making it Langlade's 15th most populous community.

At the same time, Wisconsin had a population of 5,686,986 people.

Area ...

The 2010 Census shows that the sampling area for Peck has a total area of 37.22 square miles [96.4 km²]. Of this total, a small amount of the area is covered by water (0.18 square miles [0.5 km²]).

Langlade County has a land area of 870 square miles [2,254.9 km²]. At 37.04 square miles [95.9 km²], Peck has 4.25% of the county's total land area.

  • Continue Reading ...
    • When the Census Bureau conducts a census for a community like Peck, they draw a boundary around the area in which they are going to conduct their count - this defines the sampling area (usually a polygon). The shape of the sampling area can be quite complex and it's important to keep in mind that the boundaries of the sampling area may or may not match the recognized boundaries of the community.
    • Things like population, area and housing for Peck reflect the sampling area. Since the shape of the sampling area and the actual boundaries of Peck might be different, it's best to check with the U.S. Census Bureau to resolve any difference between the two.
    • Not only does the sampling area define boundaries, it also has a GPS location (latitude & longitude) that indicates a point within the sampling area (usually the center of the polygon, known as the centroid). At the time of the 2010 Census, the sampling area was located at:
    • Lat:   45° 14' 31"   (or 45.24°)
    • Lon:   -89° 14' 41"   (or -89.24°)
    • More information on this topic and the changes between the 2000 Census and the 2010 Census can be found in the section for our Census-to-Census Observations ... (see below).

Housing Units ...

At the time of the 2010 Census, Peck had 190 Housing Units<3> and with its population of 349 people, this averages 1.84 people per Housing Unit.

  • Continue Reading ...
    • The 2010 Census shows Peck had a land area of 37.04 square miles [95.9 km²]. This translates to 5.1 Housing Units per square mile [1.97 housing units/km²].
    • From the Census of 2000: Peck had 163 Housing Units, a population of 354 people and a land area of 37.17 square miles [96.3 km²]. This gives a density of 2.17 people per Housing Unit and 4.38 Housing Units per square mile [1.69 housing units/km²].
    • Note: Repeating the caution above (under Population Density), be aware that when comparing Housing Units between the 2010 Census and the 2000 Census, there were changes in the sampling area for Peck and you need to be careful when comparing between the censuses. More information about these differences can be found in the section called Census-to-Census Observations ... (see below).

Langlade County ...

The community of Peck is located in Langlade County<4>.

The county had a population of 19,977 people at the 2010 Census. With it's population of 349 people, Peck represented 1.75% of the county's total.

In addition, where the community of Peck has a population density of 9.38 people per square mile [3.62 people/km²], Langlade County averages 22.95 people per square mile [8.86 people/km²].

For more information, please visit our Census Page for Langlade County.

Census-to-Census Observations ...

Introduction ...

When the Census Bureau takes a census count (or enumeration) for Peck, they start by specifying the boundaries of the area to be counted. This area (or sampling area) is a polygon and its shape can be quite complex - it may or may not match the geographical boundaries of Peck. It's important to note that from one Census to the next, the shape and location of the polygon can change.

  • Continue Reading ...
    • Although we don't have specific information about the shape of the polygon for Peck or how it changed has over time, there is some information that can give us some hints. For example, since the shape of the sampling area is directly related to the shape of the polygon, any change to area probably indicates a new shape for the polygon.
    • If you need precision or details about the methodology of the Census, you should visit the U.S. Census Bureau for a definitive answer.

Location ...

While generally coinciding with the GPS location (latitude/longitude) of Peck, the latitude and longitude given by the Census Bureau actually indicates the GPS location of the polygon for Peck.

  • Continue Reading ...
    • For the 2010 Census, the location was given as:
    • Lat:   45.242178°   (or 45°14'31" N)
    • Lon:   -89.244841°   (or -89°14'41" W)
    • For the 2000 Census, the location given was:
    • Lat:   45.249401°   (or 45°14'57" N)
    • Lon:   -89.240934°   (or -89°14'27" W)
    • The difference indicates that the U.S. Census Bureau moved the location of the polygon for the 2010 Census 2,817 feet to the south<5> of the location that was used in the 2000 Census.
    • The U.S. Geological Survey (USGS) and the U.S. Board on Geographic Names (BGN) have assigned a unique GNIS identifier (#1583901) to Peck. This identifier also marks a GPS point on the map, and that point lies within the boundaries of Peck. The GNIS point has been mapped to the latitude/longitude:
    • Lat:   45.249409°   (or 45°14'57" N)
    • Lon:   -89.240949°   (or -89°14'27" W)
    • The GPS location given for the 2010 Census lies 2,819 feet to the south<6> of the point given by the GNIS for Peck. For more information about this and the relationship of the various Federal Codes, please visit our Misc Page for Peck.

Miscellaneous Information for Peck ...

The Federal government has assigned various identifying codes to each community, county and state. At one time or another, the US Census Bureau has used one (or more) of the following identifiers when referring to either Langlade County or the community of Peck:

  • The GNIS Codes ...
    • The current system of identification is called the Geographic Names Information System (GNIS). The following GNIS codes relate to Peck:
    • GNIS ID for Peck: 1583901
    • GNIS ID for Langlade County: 1581093
    • GNIS ID for State of Wisconsin: 1779806
  • The FIPS Codes ...
  • Misc. Census Codes ...
    • Peck is located in Census Region #2 (the Midwest Region) and Division #3 (the East North-Central Division).

For more information about the various Federal identification codes, please visit our Misc Page for Peck.

Other Roadside Stops ...

Find a Community located in Wisconsin

About Langlade County

About Wisconsin

Off-the-Road Links ...

Unfortunately, we don't know of a website for Peck. If you can help, please contact us through our Feedback Page.

The official website for Langlade County:

The official website for State of Wisconsin:

The official website of the U.S. Census Bureau

The official website of the U.S. Board on Geographic Names (BGN)

The official website of the U.S. Geological Survey (USGS)

Footnotes ...

<1>Every year, the US Census Bureau creates a population estimate for the preceeding year. Keep in mind that this value is an estimate and not an actual count. The most recent Census estimate is for the year 2019.
<2>Every 10 years (eg- 1990, 2000, 2010), the US Census Bureau conducts a Constitutionally-mandated count (or enumeration) of people living within the United States. This count is called a Decennial Census. The last Decennial Census was the 2010 Census, with the next one planned for 2020.
<3>A Housing Unit is a broad term for those places where people live (whether occupied or temporarily vacant), such as a house, an apartment, a mobile home, or an area that is considered as a separate living quarter. Separate living quarters (consisting of one or more rooms) are considered to be those places where people live, sleep and eat separately from others and that have access to the outside (either directly or by a shared hallway).
<4>If you're interested in how the shape of Wisconsin's counties, including Langlade, have changed over time, we recommend the Atlas of Historical County Boundaries.
<5>The calculated bearing (or angle) to the 2010 Census location is 159 degrees and a distance of 2,817 feet.
<6>The calculated bearing (or angle) to the GNIS point is 159 degrees and a distance of 2,819 feet.






Sitemap Privacy
of Use



Copyright 2020
All Rights Reserved

Please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write. Click here to contact us.

This page was last modified: 30 Nov 2021