Our Genealogy Helper
Introduction ...
We have a couple of goals for our Gazetteer:
- That it be a tool which helps us with planning our trips.
- We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
- On our trips, we try to visit those places where our ancestors left their footprints.
By learning about Glencoe (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.
As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Glencoe. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.
Neighboring Counties ...
When searching for family records, we have frequently made the mistake of not checking the neighboring counties.
For example, we have great-grandparents who lived in the northeast corner of their home county. During their lives, most doctors and hospitals were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the north.
So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived: their home county contained property and probate records; the county to the east contained birth and death records; the county to the north contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.
If you're in a similar situation, we hope that the following information helps.
Glencoe is located in Buffalo County.
To see how the shape of Wisconsin's counties have changed over time, we recommend the Atlas of Historical County Boundaries.
The following counties adjoin and form the boundaries of Buffalo County: Wabasha (MN), Winona (MN), Eau Claire, Pepin & Trempealeau.
Below are the counties that are near Glencoe. For each of these counties, we show a sample of those communities that are closest to Glencoe:
- Buffalo County (The home county of Glencoe)
- The following are listed by their distance from Glencoe, with the one closest to Glencoe listed first.
- Montana
(5 miles [8 km] to the northwest) - Waumandee
(5 miles [8 km] to the west)- Jump to our Gazetteer entry for Waumandee
- Waumandee is located in Buffalo County
- Fountain City
(11 miles [17.7 km] to the southwest)- Jump to our Gazetteer entry for Fountain City
- Fountain City is located in Buffalo County
- Population from the 2020 Census: 842 people
- Cochrane
(11 miles [17.7 km] to the west)- Jump to our Gazetteer entry for Cochrane
- Cochrane is located in Buffalo County
- Population from the 2020 Census: 409 people
- Lookout
(12 miles [19.3 km] to the north)- Jump to our Gazetteer entry for Lookout
- Lookout is located in Buffalo County
- Gilmanton
(13 miles [20.9 km] to the north)- Jump to our Gazetteer entry for Gilmanton
- Gilmanton is located in Buffalo County
- Buffalo City
(13 miles [20.9 km] to the west)- Note: The GPS coordinates that we are using for Buffalo City have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Buffalo City
- Buffalo City is located in Buffalo County
- Population from the 2020 Census: 948 people
- Buffalo
(13 miles [20.9 km] to the west) - Bluff Siding
(14 miles [22.5 km] to the south)- Note: The GPS coordinates that we are using for Bluff Siding have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bluff Siding
- Bluff Siding is located in Buffalo County
- Marshland
(14 miles [22.5 km] to the south) - Alma
(15 miles [24.1 km] to the west)- Jump to our Gazetteer entry for Alma
- Alma is located in Buffalo County
- Population from the 2020 Census: 713 people
- Springdale ‑ Historic
(19 miles [30.6 km] to the northwest)- Note: The GPS coordinates that we are using for Springdale have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Springdale
- Springdale is located in Buffalo County
- Mondovi
(20 miles [32.2 km] to the north)
- Dunn County
- Rock Falls
(30 miles [48.3 km] to the north)- Note: The GPS coordinates that we are using for Rock Falls have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rock Falls
- Rock Falls is located in Dunn County
- Rock Falls
- Eau Claire County
- Allen
(29 miles [46.7 km] to the northeast)- Jump to our Gazetteer entry for Allen
- Allen is located in Eau Claire County
- Allen
- Jackson County
- The following are listed by their distance from Glencoe, with the one closest to Glencoe listed first.
- Taylor
(24 miles [38.6 km] to the east) - York
(26 miles [41.8 km] to the northeast) - North Bend
(27 miles [43.5 km] to the southeast)- Note: The GPS coordinates that we are using for North Bend have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North Bend
- North Bend is located in Jackson County
- Sechlerville
(29 miles [46.7 km] to the east)- Note: The GPS coordinates that we are using for Sechlerville have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sechlerville
- Sechlerville is located in Jackson County
- Hixton
(30 miles [48.3 km] to the east)- Jump to our Gazetteer entry for Hixton
- Hixton is located in Jackson County
- Population from the 2020 Census: 417 people
- La Crosse County
- The following are listed by their distance from Glencoe, with the one closest to Glencoe listed first.
- Brice Prairie
(27 miles [43.5 km] to the southeast)- Note: The GPS coordinates that we are using for Brice Prairie have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brice Prairie
- Brice Prairie is located in La Crosse County
- Holmen
(28 miles [45.1 km] to the southeast) - Midway
(29 miles [46.7 km] to the southeast)- Jump to our Gazetteer entry for Midway
- Midway is located in La Crosse County
- Mindoro
(30 miles [48.3 km] to the southeast)- Jump to our Gazetteer entry for Mindoro
- Mindoro is located in La Crosse County
- Pepin County
- The following are listed by their distance from Glencoe, with the one closest to Glencoe listed first.
- Ella
(28 miles [45.1 km] to the northwest)- Jump to our Gazetteer entry for Ella
- Ella is located in Pepin County
- Pepin
(28 miles [45.1 km] to the northwest)- Jump to our Gazetteer entry for Pepin
- Pepin is located in Pepin County
- Population from the 2020 Census: 747 people
- Durand
(29 miles [46.7 km] to the northwest)- Jump to our Gazetteer entry for Durand
- Durand is located in Pepin County
- Population from the 2020 Census: 1,789 people
- Lakeport
(30 miles [48.3 km] to the northwest)- Jump to our Gazetteer entry for Lakeport
- Lakeport is located in Pepin County
- Trempealeau County
- The following are listed by their distance from Glencoe, with the one closest to Glencoe listed first.
- Arcadia
(5 miles [8 km] to the east)- Jump to our Gazetteer entry for Arcadia
- Arcadia is located in Trempealeau County
- Population from the 2020 Census: 3,026 people
- New City ‑ Historic
(9 miles [14.5 km] to the northeast) - Independence
(11 miles [17.7 km] to the northeast)- Note: The GPS coordinates that we are using for Independence have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Independence
- Independence is located in Trempealeau County
- Population from the 2020 Census: 1,291 people
- Russell
(12 miles [19.3 km] to the northeast)- Jump to our Gazetteer entry for Russell
- Russell is located in Trempealeau County
- Whitehall
(15 miles [24.1 km] to the northeast) - Frenchville
(16 miles [25.7 km] to the southeast)- Jump to our Gazetteer entry for Frenchville
- Frenchville is located in Trempealeau County
- Wrights Corners
(16 miles [25.7 km] to the southeast)- Jump to our Gazetteer entry for Wrights Corners
- Wrights Corners is located in Trempealeau County
- Blair
(18 miles [29 km] to the east) - Ettrick
(18 miles [29 km] to the east) - Coral City
(18 miles [29 km] to the northeast)- Note: The GPS coordinates that we are using for Coral City have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Coral City
- Coral City is located in Trempealeau County
- Galesville
(18 miles [29 km] to the southeast)- Jump to our Gazetteer entry for Galesville
- Galesville is located in Trempealeau County
- Population from the 2020 Census: 1,602 people
- Trempealeau
(20 miles [32.2 km] to the southeast)- Note: The GPS coordinates that we are using for Trempealeau have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Trempealeau
- Trempealeau is located in Trempealeau County
- Population from the 2020 Census: 1,663 people
- Eleva
(21 miles [33.8 km] to the north)- Jump to our Gazetteer entry for Eleva
- Eleva is located in Trempealeau County
- Population from the 2020 Census: 661 people
- Wabasha County (MN)
- The following are listed by their distance from Glencoe, with the one closest to Glencoe listed first.
- Minneiska
(13 miles [20.9 km] to the southwest)- Jump to our Gazetteer entry for Minneiska
- Minneiska is located in Wabasha County (MN)
- Population from the 2020 Census: 108 people
- Jump to TripAdvisor's Tourism page for Minneiska <3>
- Weaver
(16 miles [25.7 km] to the west)- Jump to our Gazetteer entry for Weaver
- Weaver is located in Wabasha County (MN)
- Kellogg
(19 miles [30.6 km] to the west)- Note: The GPS coordinates that we are using for Kellogg have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kellogg
- Kellogg is located in Wabasha County (MN)
- Population from the 2020 Census: 460 people
- Jump to TripAdvisor's Tourism page for Kellogg <3>
- Wabasha
(22 miles [35.4 km] to the west)- Note: The GPS coordinates that we are using for Wabasha have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wabasha
- Wabasha is located in Wabasha County (MN)
- Population from the 2020 Census: 2,467 people
- Jump to TripAdvisor's Tourism page for Wabasha <3>
- Reads Landing
(24 miles [38.6 km] to the west)- Note: The GPS coordinates that we are using for Reads Landing have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Reads Landing
- Reads Landing is located in Wabasha County (MN)
- Jump to TripAdvisor's Tourism page for Reads Landing <3>
- Plainview
(28 miles [45.1 km] to the west)- Note: The GPS coordinates that we are using for Plainview have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Plainview
- Plainview is located in Wabasha County (MN)
- Population from the 2020 Census: 3,292 people
- Jump to TripAdvisor's Tourism page for Plainview <3>
- Winona County (MN)
- The following are listed by their distance from Glencoe, with the one closest to Glencoe listed first.
- Minnesota City
(14 miles [22.5 km] to the southwest)- Note: The GPS coordinates that we are using for Minnesota City have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Minnesota City
- Minnesota City is located in Winona County (MN)
- Population from the 2020 Census: 186 people
- Jump to TripAdvisor's Tourism page for Minnesota City <3>
- Goodview
(15 miles [24.1 km] to the south) - Winona
(15 miles [24.1 km] to the south)- Jump to our Gazetteer entry for Winona
- Winona is located in Winona County (MN)
- Population from the 2020 Census: 26,545 people
- Jump to TripAdvisor's Tourism page for Winona <3>
- Rollingstone
(15 miles [24.1 km] to the southwest)- Note: The GPS coordinates that we are using for Rollingstone have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rollingstone
- Rollingstone is located in Winona County (MN)
- Population from the 2020 Census: 637 people
- Jump to TripAdvisor's Tourism page for Rollingstone <3>
- Homer
(17 miles [27.4 km] to the south) - Stockton
(18 miles [29 km] to the southwest) - Lamoille
(20 miles [32.2 km] to the south)- Jump to our Gazetteer entry for Lamoille
- Lamoille is located in Winona County (MN)
- Altura
(21 miles [33.8 km] to the southwest)- Note: The GPS coordinates that we are using for Altura have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Altura
- Altura is located in Winona County (MN)
- Population from the 2020 Census: 477 people
- Jump to TripAdvisor's Tourism page for Altura <3>
- Beaver ‑ Historic
(21 miles [33.8 km] to the southwest)- Jump to our Gazetteer entry for Beaver
- Beaver is located in Winona County (MN)
- Elba
(23 miles [37 km] to the southwest) - Lewiston
(23 miles [37 km] to the southwest)- Note: The GPS coordinates that we are using for Lewiston have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lewiston
- Lewiston is located in Winona County (MN)
- Population from the 2020 Census: 1,543 people
- Jump to TripAdvisor's Tourism page for Lewiston <3>
- Wyattville
(24 miles [38.6 km] to the south)- Note: The GPS coordinates that we are using for Wyattville have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wyattville
- Wyattville is located in Winona County (MN)
- Utica
(26 miles [41.8 km] to the southwest)- Note: The GPS coordinates that we are using for Utica have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Utica
- Utica is located in Winona County (MN)
- Population from the 2020 Census: 275 people
- Jump to TripAdvisor's Tourism page for Utica <3>
For an expanded list of the communities that are closest to Glencoe, see our County-by-County Page for Glencoe.
Newspapers Published in Glencoe ...
An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).
To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.
Using information that we've taken from the Chronicling America website, we've identified 141 newspapers that have been published in the area around Glencoe.
Although we're unaware of any newspapers that were published in the immediate area of Glencoe, there are papers which were published within 30 miles [48.3 km]<4>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Glencoe.
Websites to Help With Your Genealogy Research ...
When we do our genealogical research, we like to start with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites either offer the information directly or else point to where you can find it. Their information is open to everyone.
To help you get started, the following links will take you to the pages that are relevant to Glencoe:
- Websites specific to Wisconsin
- Jump to Cyndi's List
- Jump to Family Search
- Jump to Genealogy Trails
- Website for the //www.wisconsinhistory.org/
- Pages specific to Buffalo County
- Jump to Cyndi's List
- Jump to Family Search
- Jump to Genealogy Trails
- Genealogy information for nearby counties
- Dunn County
- Jump to Cyndi's List
- Jump to Family Search
- Jump to Genealogy Trails
- Eau Claire County
- Jump to Cyndi's List
- Jump to Family Search
- Jump to Genealogy Trails
- Jackson County
- Jump to Cyndi's List
- Jump to Family Search
- Jump to Genealogy Trails
- La Crosse County
- Jump to Cyndi's List
- Jump to Family Search
- Jump to Genealogy Trails
- Pepin County
- Jump to Cyndi's List
- Jump to Family Search
- Jump to Genealogy Trails
- Trempealeau County
- Jump to Cyndi's List
- Jump to Family Search
- Jump to Genealogy Trails
- Wabasha County
- Jump to Cyndi's List
- Jump to Family Search
- Jump to Genealogy Trails
- Winona County
- Jump to Cyndi's List
- Jump to Family Search
- Jump to Genealogy Trails
- Dunn County
- Cemetery Information and Directories for Wisconsin
- Cemetery Junction: Cemeteries of Wisconsin
- Cyndi's List
- Cemeteries of Wisconsin
- Cemeteries of Buffalo County
- FamilySearch.org: Cemeteries of Wisconsin
- Find-A-Grave: Home Page
- Interment.net
- Cemeteries of Wisconsin
- Cemeteries of Buffalo County
Cemeteries Near Glencoe ...
Below are cemeteries that are in the vicinity of Glencoe.
This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.
If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).
If not found below, our Cemetery List for Glencoe covers a larger area, with the cemeteries listed in alphabetical order.
The following cemeteries are listed based on their distance from Glencoe, with the one closest to Glencoe listed first.
- St. Joseph Cemetery
(3 miles [4.8 km] to the southeast)- Note: The GPS coordinates that we are using for the St. Joseph Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for the St. Joseph Cemetery
- Glencoe Cemetery
(3 miles [4.8 km] to the southeast)- Note: The GPS coordinates that we are using for the Glencoe Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for the Glencoe Cemetery
- Cortland Cemetery
(4 miles [6.4 km] to the southeast)- Note: The GPS coordinates that we are using for the Cortland Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for the Cortland Cemetery
- St. Boniface Cemetery
(4 miles [6.4 km] to the west)- Note: The GPS coordinates that we are using for the St. Boniface Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for the St. Boniface Cemetery
- Eagle Valley Cemetery
(5 miles [8 km] to the southwest)- Note: The GPS coordinates that we are using for the Eagle Valley Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for the Eagle Valley Cemetery
- Waumandee Cemetery
(5 miles [8 km] to the west)- Note: The GPS coordinates that we are using for the Waumandee Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for the Waumandee Cemetery
- Calvary Cemetery
(6 miles [9.7 km] to the southeast)- Note: The GPS coordinates that we are using for the Calvary Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for the Calvary Cemetery
- Lower Montana Ridge Cemetery
(6 miles [9.7 km] to the north)- Note: The GPS coordinates that we are using for the Lower Montana Ridge Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for the Lower Montana Ridge Cemetery
- Arcadia Cemetery
(7 miles [11.3 km] to the east)- Note: The GPS coordinates that we are using for the Arcadia Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for the Arcadia Cemetery
- St. Stanislaus Cemetery
(7 miles [11.3 km] to the east)- Note: The GPS coordinates that we are using for the St. Stanislaus Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for the St. Stanislaus Cemetery
- Anchorage Cemetery
(7 miles [11.3 km] to the west)- Note: The GPS coordinates that we are using for the Anchorage Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for the Anchorage Cemetery
- Lincoln Cemetery
(8 miles [12.9 km] to the northwest)- Note: The GPS coordinates that we are using for the Lincoln Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for the Lincoln Cemetery
- Continue List (146 more) ...
- Zion Cemetery
(8 miles [12.9 km] to the west)- Note: The GPS coordinates that we are using for the Zion Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for the Zion Cemetery
- Bohris Valley Cemetery
(9 miles [14.5 km] to the south)- Note: The GPS coordinates that we are using for the Bohris Valley Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for the Bohris Valley Cemetery
- Upper Montana Ridge Cemetery
(9 miles [14.5 km] to the north)- Note: The GPS coordinates that we are using for the Upper Montana Ridge Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for the Upper Montana Ridge Cemetery
- Zion Cemetery
Nearby Communities in 1895 ...
We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<5>
The Rand McNally Atlas shows that Glencoe had a population of 41 people in 1895 with a post office and no railroad service.
These communities are listed based on their distance from Glencoe, with the one closest to Glencoe listed first.
- Cortland ‑ Historic
(4 miles [6.4 km] to the southeast) - Arcadia
(5 miles [8 km] to the east)- Jump to our Gazetteer entry for Arcadia
- Arcadia is located in Trempealeau County
- Population from the 2020 Census: 3,026 people
- Montana
(5 miles [8 km] to the northwest) - Waumandee
(5 miles [8 km] to the west)- Jump to our Gazetteer entry for Waumandee
- Waumandee is located in Buffalo County
- Anchorage ‑ Historic
(7 miles [11.3 km] to the west) - Cream
(8 miles [12.9 km] to the west) - Bohri ‑ Historic
(9 miles [14.5 km] to the south) - Dodge
(10 miles [16.1 km] to the south) - Cochrane
(11 miles [17.7 km] to the west)- Jump to our Gazetteer entry for Cochrane
- Cochrane is located in Buffalo County
- Population from the 2020 Census: 409 people
- Fountain City
(11 miles [17.7 km] to the southwest)- Jump to our Gazetteer entry for Fountain City
- Fountain City is located in Buffalo County
- Population from the 2020 Census: 842 people
- Independence
(11 miles [17.7 km] to the northeast)- Note: The GPS coordinates that we are using for Independence have been provided by the GNIS.<1> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Independence
- Independence is located in Trempealeau County
- Population from the 2020 Census: 1,291 people
- Herold
(11 miles [17.7 km] to the west) - Continue List (16 more) ...
We've also created an expanded list of communities that existed in the 1890's and were located in the area around Glencoe. See our List of 1890's Communities around Glencoe.
Off-the-Road Links ...
Unfortunately, we don't know of a website for Glencoe. If you can help, please contact us through our Feedback Page.
The official website for Buffalo County: www.buffalocounty.com/
The official website for State of Wisconsin: https://www.wisconsin.gov/
Footnotes ...
| <1> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <2> | If we found a location and have questions about the accuracy of our information, we will simply say that the marker is 'in the vicinity'. We are not confident about the location and the position of our marker is only a rough guide. If we have too many doubts about the location, we will not include it in our database. |
| <3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <4> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Glencoe) to Point B.Our distance measurements begin at a specific point in Glencoe. The point we use is located at these GPS coordinates - Latitude: 44.2752, Longitude: -91.6118 In this case, the coordinates for Glencoe have been provided by the Geographic Names Information System (GNIS). |
| <5> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Glencoe, please let us know so that we can improve our accuracy. |