|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the St.s Peter & Paul Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the St.s Peter & Paul Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the St.s Peter & Paul Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Weyerhaeuser
(Less than 2 miles to the east)
- Note: The GPS coordinates that we are using for Weyerhaeuser have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Weyerhaeuser
- Weyerhaeuser is located in Rusk County
- Population from the 2020 Census: 210 people
- Apollonia
(5 miles [8 km] to the east)
- Jump to our Gazetteer entry for Apollonia
- Apollonia is located in Rusk County
- Strickland
(5 miles [8 km] to the west)
- Jump to our Gazetteer entry for Strickland
- Strickland is located in Rusk County
- Bruce
(7 miles [11.3 km] to the east)
- Note: The GPS coordinates that we are using for Bruce have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bruce
- Bruce is located in Rusk County
- Population from the 2020 Census: 688 people
- Port Arthur
(12 miles [19.3 km] to the east)
- Jump to our Gazetteer entry for Port Arthur
- Port Arthur is located in Rusk County
- Chetek
(13 miles [20.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Chetek have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chetek
- Chetek is located in Barron County
- Population from the 2020 Census: 2,094 people
- Ladysmith
(15 miles [24.1 km] to the east)
- Note: The GPS coordinates that we are using for Ladysmith have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ladysmith
- Ladysmith is located in Rusk County
- Population from the 2020 Census: 3,054 people
- Cameron
(15 miles [24.1 km] to the west)
- Note: The GPS coordinates that we are using for Cameron have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cameron
- Cameron is located in Barron County
- Population from the 2020 Census: 1,798 people
- New Auburn
(16 miles [25.7 km] to the southwest)
- Jump to our Gazetteer entry for New Auburn
- New Auburn is located in Chippewa County
- Population from the 2020 Census: 576 people
- Rice Lake
(16 miles [25.7 km] to the west)
- Note: The GPS coordinates that we are using for Rice Lake have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rice Lake
- Rice Lake is located in Barron County
- Population from the 2020 Census: 8,498 people
- Birchwood
(17 miles [27.4 km] to the north)
- Note: The GPS coordinates that we are using for Birchwood have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Birchwood
- Birchwood is located in Washburn County
- Population from the 2020 Census: 426 people
- Conrath
(18 miles [29 km] to the east)
- Note: The GPS coordinates that we are using for Conrath have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Conrath
- Conrath is located in Rusk County
- Population from the 2020 Census: 90 people
- Exeland
(19 miles [30.6 km] to the northeast)
- Note: The GPS coordinates that we are using for Exeland have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Exeland
- Exeland is located in Sawyer County
- Population from the 2020 Census: 190 people
- Tony
(20 miles [32.2 km] to the east)
- Note: The GPS coordinates that we are using for Tony have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tony
- Tony is located in Rusk County
- Population from the 2020 Census: 100 people
- Barron
(20 miles [32.2 km] to the west)
- Jump to our Gazetteer entry for Barron
- Barron is located in Barron County
- Population from the 2020 Census: 3,235 people
- Haugen
(21 miles [33.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Haugen have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Haugen
- Haugen is located in Barron County
- Population from the 2020 Census: 270 people
- Dallas
(22 miles [35.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Dallas have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dallas
- Dallas is located in Barron County
- Population from the 2020 Census: 344 people
- Bloomer
(22 miles [35.4 km] to the south)
- Jump to our Gazetteer entry for Bloomer
- Bloomer is located in Chippewa County
- Population from the 2020 Census: 3,508 people
- Cornell
(22 miles [35.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Cornell have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cornell
- Cornell is located in Chippewa County
- Population from the 2020 Census: 1,400 people
- Nobleton
(22 miles [35.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Nobleton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nobleton
- Nobleton is located in Washburn County
- Sheldon
(23 miles [37 km] to the east)
- Note: The GPS coordinates that we are using for Sheldon have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sheldon
- Sheldon is located in Rusk County
- Population from the 2020 Census: 210 people
- Eagleton
(24 miles [38.6 km] to the south)
- Jump to our Gazetteer entry for Eagleton
- Eagleton is located in Chippewa County
- Glen Flora
(25 miles [40.2 km] to the east)
- Note: The GPS coordinates that we are using for Glen Flora have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Glen Flora
- Glen Flora is located in Rusk County
- Population from the 2020 Census: 85 people
- Radisson
(25 miles [40.2 km] to the north)
- Note: The GPS coordinates that we are using for Radisson have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Radisson
- Radisson is located in Sawyer County
- Population from the 2020 Census: 232 people
- Madge
(26 miles [41.8 km] to the northwest)
- Jump to our Gazetteer entry for Madge
- Madge is located in Washburn County
- Couderay
(26 miles [41.8 km] to the north)
- Note: The GPS coordinates that we are using for Couderay have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Couderay
- Couderay is located in Sawyer County
- Population from the 2020 Census: 86 people
- Poskin
(26 miles [41.8 km] to the west)
- Jump to our Gazetteer entry for Poskin
- Poskin is located in Barron County
Off-the-Road Links ...
The official website for Rusk County: www.ruskcounty.org/ The official website for State of Wisconsin: https://www.wisconsin.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the St.s Peter & Paul Cemetery. The point we use is located at these GPS coordinates - Latitude: 45.4214, Longitude: -91.4188 In this case, the coordinates for the St.s Peter & Paul Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|