|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Eagleton Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Eagleton Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Eagleton Cemetery. We've listed the following communities based on their distance, with the closest first.
- Eagleton
(Less than 2 miles to the west)
- Jump to our Gazetteer entry for Eagleton
- Eagleton is located in Chippewa County
- Bloomer
(5 miles [8 km] to the northwest)
- Jump to our Gazetteer entry for Bloomer
- Bloomer is located in Chippewa County
- Population from the 2020 Census: 3,508 people
- Chippewa Falls
(8 miles [12.9 km] to the south)
- Jump to our Gazetteer entry for Chippewa Falls
- Chippewa Falls is located in Chippewa County
- Population from the 2020 Census: 14,407 people
- Irvine
(9 miles [14.5 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Irvine. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Irvine
- Irvine is located in Chippewa County
- Lake Wissota
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Lake Wissota have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lake Wissota
- Lake Wissota is located in Chippewa County
- Drywood
(10 miles [16.1 km] to the east)
- Jump to our Gazetteer entry for Drywood
- Drywood is located in Chippewa County
- Lake Hallie
(11 miles [17.7 km] to the south)
- Note: The GPS coordinates that we are using for Lake Hallie have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lake Hallie
- Lake Hallie is located in Chippewa County
- Population from the 2020 Census: 6,779 people
- Albertville
(12 miles [19.3 km] to the southwest)
- Jump to our Gazetteer entry for Albertville
- Albertville is located in Chippewa County
- Cadott
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Cadott have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cadott
- Cadott is located in Chippewa County
- Population from the 2020 Census: 1,411 people
- Cornell
(13 miles [20.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Cornell have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cornell
- Cornell is located in Chippewa County
- Population from the 2020 Census: 1,400 people
- New Auburn
(13 miles [20.9 km] to the northwest)
- Jump to our Gazetteer entry for New Auburn
- New Auburn is located in Chippewa County
- Population from the 2020 Census: 576 people
- Estella
(14 miles [22.5 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Estella. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Estella
- Estella is located in Chippewa County
- Population from the 2020 Census: 452 people
- Seymour
(16 miles [25.7 km] to the south)
- Note: The GPS coordinates that we are using for Seymour have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Seymour
- Seymour is located in Eau Claire County
- Colfax
(17 miles [27.4 km] to the west)
- Note: The GPS coordinates that we are using for Colfax have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Colfax
- Colfax is located in Dunn County
- Population from the 2020 Census: 1,151 people
- Eau Claire
(18 miles [29 km] to the south)
- Jump to our Gazetteer entry for Eau Claire
- Eau Claire is located in Eau Claire County
- Population from the 2020 Census: 69,087 people
- Altoona
(18 miles [29 km] to the south)
- Note: The GPS coordinates that we are using for Altoona have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Altoona
- Altoona is located in Eau Claire County
- Population from the 2020 Census: 8,062 people
- Boyd
(18 miles [29 km] to the southeast)
- Note: The GPS coordinates that we are using for Boyd have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Boyd
- Boyd is located in Chippewa County
- Population from the 2020 Census: 528 people
- Elk Mound
(19 miles [30.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Elk Mound have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Elk Mound
- Elk Mound is located in Dunn County
- Population from the 2020 Census: 884 people
- Shawtown
(20 miles [32.2 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Shawtown. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Shawtown
- Shawtown is located in Eau Claire County
- Fall Creek
(21 miles [33.8 km] to the south)
- Note: The GPS coordinates that we are using for Fall Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fall Creek
- Fall Creek is located in Eau Claire County
- Population from the 2020 Census: 1,291 people
- Chetek
(21 miles [33.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Chetek have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chetek
- Chetek is located in Barron County
- Population from the 2020 Census: 2,094 people
- Stanley
(22 miles [35.4 km] to the east)
- Note: The GPS coordinates that we are using for Stanley have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stanley
- Stanley is located in Chippewa County
- Population from the 2020 Census: 3,705 people
- Tainter Lake
(23 miles [37 km] to the west)
- Note: The GPS coordinates that we are using for Tainter Lake have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tainter Lake
- Tainter Lake is located in Dunn County
- Lufkin
(24 miles [38.6 km] to the southwest)
- Jump to our Gazetteer entry for Lufkin
- Lufkin is located in Eau Claire County
- Weyerhaeuser
(24 miles [38.6 km] to the north)
- Note: The GPS coordinates that we are using for Weyerhaeuser have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Weyerhaeuser
- Weyerhaeuser is located in Rusk County
- Population from the 2020 Census: 210 people
Off-the-Road Links ...
The official website for Chippewa County: www.co.chippewa.wi.us/ The official website for State of Wisconsin: https://www.wisconsin.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Eagleton Cemetery. The point we use is located at these GPS coordinates - Latitude: 45.0622, Longitude: -91.3799 In this case, the coordinates for the Eagleton Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|