RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Wisconsin >> Portage County >> Alban >> Nearby Communities - 1890sIndex...

Nearby Communities in the 1890s


We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.

If it applies, we indicate whether a community no longer exists and is now historic.<1>

The Rand McNally Atlas shows that Alban had a population of 65 people in 1895 with a post office and no railroad service.

The following communities are listed based on their distance from Alban, with the one closest to Alban listed first.

  • Garfield
    (4 miles [6.4 km] to the south)
  • Peru
    (4 miles [6.4 km] to the southeast)
    • Peru is located in Portage County
    • Jump to our Gazetteer entry for Peru
  • Northland
    (4 miles [6.4 km] to the southeast)
    • Northland is located in Waupaca County
    • Jump to our Gazetteer entry for Northland
  • Polonia
    (7 miles [11.3 km] to the southwest)
  • Shantytown
    (7 miles [11.3 km] to the northwest)
    • Shantytown is located in Marathon County
    • Jump to our Gazetteer entry for Shantytown
  • Ellis
    (8 miles [12.9 km] to the southwest)
  • New Hope
    (8 miles [12.9 km] to the south)
    • New Hope is located in Portage County
    • Jump to our Gazetteer entry for New Hope
  • Nelsonville
    (9 miles [14.5 km] to the south)
  • Custer
    (10 miles [16.1 km] to the southwest)
  • Lake Emily ‑ Historic
    (10 miles [16.1 km] to the south)
  • Elderon
    (10 miles [16.1 km] to the north)
    • Elderon is located in Marathon County
    • Jump to our Gazetteer entry for Elderon
    • Population from the 2020 Census: 213 people
  • Amherst Junction
    (11 miles [17.7 km] to the south)
    • Amherst Junction is located in Portage County
    • Jump to our Gazetteer entry for Amherst Junction
    • Population from the 2020 Census: 392 people
  • Iola
    (11 miles [17.7 km] to the southeast)
    • Iola is located in Waupaca County
    • Jump to our Gazetteer entry for Iola
    • Population from the 2020 Census: 1,190 people
  • Bevent
    (11 miles [17.7 km] to the northwest)
    • Bevent is located in Marathon County
    • Jump to our Gazetteer entry for Bevent
  • Stockton
    (12 miles [19.3 km] to the southwest)
    • Stockton is located in Portage County
    • Jump to our Gazetteer entry for Stockton
  • Fancher
    (12 miles [19.3 km] to the southwest)
    • Fancher is located in Portage County
    • Jump to our Gazetteer entry for Fancher
  • Amherst
    (12 miles [19.3 km] to the south)
  • Pike Lake
    (13 miles [20.9 km] to the north)
  • Scandinavia
    (13 miles [20.9 km] to the southeast)
    • Scandinavia is located in Waupaca County
    • Jump to our Gazetteer entry for Scandinavia
    • Population from the 2020 Census: 349 people
  • Big Falls
    (13 miles [20.9 km] to the east)
    • Big Falls is located in Waupaca County
    • Jump to our Gazetteer entry for Big Falls
    • Population from the 2020 Census: 69 people
  • Split Rock
    (13 miles [20.9 km] to the northeast)
  • Tigerton
    (13 miles [20.9 km] to the northeast)
  • Whitcomb
    (13 miles [20.9 km] to the northeast)
    • Whitcomb is located in Shawano County
    • Jump to our Gazetteer entry for Whitcomb
  • Arnott
    (14 miles [22.5 km] to the southwest)
  • Wittenberg
    (14 miles [22.5 km] to the north)

Footnotes ...

<1>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Alban, please let us know so that we can improve our accuracy.