|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Fuller in the Atlas, the following communities of the 1890's would have been found near the current location of Fuller. The following communities are listed based on their distance, with the one closest to Fuller listed first.
- Satsop
(2 miles [3.2 km] to the north)
- Note: The GPS coordinates that we are using for Satsop have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Satsop
- Satsop is located in Grays Harbor County
- Elma
(3 miles [4.8 km] to the northeast)
- Jump to our Gazetteer entry for Elma
- Elma is located in Grays Harbor County
- Population from the 2020 Census: 3,378 people
- Jump to TripAdvisor's Tourism page for Elma <3>
- Montesano
(6 miles [9.7 km] to the west)
- Melbourne
(7 miles [11.3 km] to the west)
- Jump to our Gazetteer entry for Melbourne
- Melbourne is located in Grays Harbor County
- Porter
(7 miles [11.3 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Porter. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Porter
- Porter is located in Grays Harbor County
- Cedarville
(11 miles [17.7 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Cedarville. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Cedarville
- Cedarville is located in Grays Harbor County
- Artic
(12 miles [19.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Artic have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Artic
- Artic is located in Grays Harbor County
- Aberdeen Junction
(13 miles [20.9 km] to the west)
- Note: The GPS coordinates that we are using for Aberdeen Junction have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Aberdeen Junction
- Aberdeen Junction is located in Grays Harbor County
- Oakville
(14 miles [22.5 km] to the southeast)
- Cosmopolis
(14 miles [22.5 km] to the west)
- South Aberdeen
(15 miles [24.1 km] to the west)
- Jump to our Gazetteer entry for South Aberdeen
- South Aberdeen is located in Grays Harbor County
- Aberdeen
(16 miles [25.7 km] to the west)
- Matlock
(18 miles [29 km] to the north)
- Jump to our Gazetteer entry for Matlock
- Matlock is located in Mason County
- Hoquiam
(19 miles [30.6 km] to the west)
- New Kamilche
(20 miles [32.2 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for New Kamilche. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for New Kamilche
- New Kamilche is located in Mason County
- Kamilche
(20 miles [32.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Kamilche have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kamilche
- Kamilche is located in Mason County
- Rochester
(21 miles [33.8 km] to the southeast)
- Littlerock
(21 miles [33.8 km] to the east)
- Willapa
(22 miles [35.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Willapa have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Willapa
- Willapa is located in Pacific County
- Belmore
(23 miles [37 km] to the east)
- Note: The GPS coordinates that we are using for Belmore have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Belmore
- Belmore is located in Thurston County
- Shelton
(23 miles [37 km] to the northeast)
- Grand Mound
(24 miles [38.6 km] to the southeast)
- Markham
(25 miles [40.2 km] to the west)
- Note: The GPS coordinates that we are using for Markham have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Markham
- Markham is located in Grays Harbor County
- South Bend
(26 miles [41.8 km] to the southwest)
- Tumwater
(26 miles [41.8 km] to the east)
Off-the-Road Links ...
The official website for Grays Harbor County: www.co.grays-harbor.wa.us/ The official website for State of Washington: https://wa.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Fuller, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|