RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Vermont >> Bennington County >> Rupert >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Vermont

The Commemorative Quarter for Vermont





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Rupert (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Rupert. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the southeast corner of their home county. During their lives, most doctors were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the south.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the east contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Rupert is located in Bennington County.

To see how the shape of Vermont's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Bennington County: Berkshire (MA), Franklin (MA), Rensselaer (NY), Washington (NY), Rutland, Windham & Windsor.

Below are the counties that are near Rupert. For each of these counties, we show a sample of those communities that are closest to Rupert:

  • Bennington County     (The home county of Rupert)
    • The following are listed by their distance from Rupert, with the one closest to Rupert listed first.
    • Rupert
      (Less than 2 miles to the northeast)
      • Note: The GPS coordinates that we are using for Rupert have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rupert
      • Rupert is located in Bennington County
      • Population from the 2020 Census: 682 people
    • West Rupert
      (Less than 2 miles to the southwest)
    • Dorset
      (6 miles [9.7 km] to the east)
    • Sandgate
      (7 miles [11.3 km] to the south)
      • Note: The GPS coordinates that we are using for Sandgate have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sandgate
      • Sandgate is located in Bennington County
      • Population from the 2020 Census: 380 people
    • Dorset
      (8 miles [12.9 km] to the east)
      • Note: The GPS coordinates that we are using for Dorset have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dorset
      • Dorset is located in Bennington County
      • Population from the 2020 Census: 1,937 people
    • Manchester Center
      (10 miles [16.1 km] to the southeast)
    • Manchester
      (10 miles [16.1 km] to the southeast)
      • Note: The GPS coordinates that we are using for Manchester have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Manchester
      • Manchester is located in Bennington County
      • Population from the 2020 Census: 4,214 people
    • Manchester
      (10 miles [16.1 km] to the southeast)
      • Note: The GPS coordinates that we are using for Manchester have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Manchester
      • Manchester is located in Bennington County
      • Population from the 2020 Census: 708 people
      • Jump to TripAdvisor's Tourism page for Manchester <2>
    • Barnumville
      (11 miles [17.7 km] to the southeast)
    • Manchester Depot
      (11 miles [17.7 km] to the southeast)
    • Arlington
      (12 miles [19.3 km] to the south)
      • Note: The GPS coordinates that we are using for Arlington have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Arlington
      • Arlington is located in Bennington County
      • Population from the 2020 Census: 2,204 people
    • Arlington
      (13 miles [20.9 km] to the south)
      • Note: The GPS coordinates that we are using for Arlington have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Arlington
      • Arlington is located in Bennington County
      • Jump to TripAdvisor's Tourism page for Arlington <2>
  • Rutland County
    • The following are listed by their distance from Rupert, with the one closest to Rupert listed first.
    • Pawlet
      (7 miles [11.3 km] to the north)
      • Note: The GPS coordinates that we are using for Pawlet have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Pawlet
      • Pawlet is located in Rutland County
      • Population from the 2020 Census: 1,359 people
    • Wells
      (10 miles [16.1 km] to the north)
    • Danby
      (10 miles [16.1 km] to the northeast)
      • Note: The GPS coordinates that we are using for Danby have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Danby
      • Danby is located in Rutland County
      • Population from the 2020 Census: 1,308 people
    • Wells
      (12 miles [19.3 km] to the north)
      • Note: The GPS coordinates that we are using for Wells have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wells
      • Wells is located in Rutland County
      • Population from the 2020 Census: 1,151 people
    • South Wallingford
      (15 miles [24.1 km] to the northeast)
    • Tinmouth
      (15 miles [24.1 km] to the northeast)
      • Note: The GPS coordinates that we are using for Tinmouth have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Tinmouth
      • Tinmouth is located in Rutland County
      • Population from the 2020 Census: 588 people
    • Middletown Springs
      (16 miles [25.7 km] to the north)
      • Note: The GPS coordinates that we are using for Middletown Springs have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Middletown Springs
      • Middletown Springs is located in Rutland County
      • Population from the 2020 Census: 748 people
    • Middletown Springs
      (16 miles [25.7 km] to the north)
    • Mount Tabor
      (16 miles [25.7 km] to the northeast)
      • Note: The GPS coordinates that we are using for Mount Tabor have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mount Tabor
      • Mount Tabor is located in Rutland County
      • Population from the 2020 Census: 257 people
    • Poultney
      (17 miles [27.4 km] to the north)
    • Poultney
      (18 miles [29 km] to the north)
      • Note: The GPS coordinates that we are using for Poultney have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Poultney
      • Poultney is located in Rutland County
      • Population from the 2020 Census: 3,239 people
    • Wallingford
      (19 miles [30.6 km] to the northeast)
      • Note: The GPS coordinates that we are using for Wallingford have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wallingford
      • Wallingford is located in Rutland County
      • Population from the 2020 Census: 1,938 people
  • Windham County
    • The following are listed by their distance from Rupert, with the one closest to Rupert listed first.
    • Stratton
      (19 miles [30.6 km] to the southeast)
      • Note: The GPS coordinates that we are using for Stratton have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Stratton
      • Stratton is located in Windham County
      • Population from the 2020 Census: 197 people
    • Stratton
      (21 miles [33.8 km] to the southeast)
    • Jamaica
      (23 miles [37 km] to the southeast)
      • Note: The GPS coordinates that we are using for Jamaica have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Jamaica
      • Jamaica is located in Windham County
      • Population from the 2020 Census: 1,025 people
    • Jamaica
      (24 miles [38.6 km] to the southeast)
    • Podunk
      (24 miles [38.6 km] to the southeast)
    • Somerset
      (24 miles [38.6 km] to the southeast)
      • Note: The GPS coordinates that we are using for Somerset have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Somerset
      • Somerset is located in Windham County
      • Population from the 2020 Census: 3 people
    • West Wardsboro
      (24 miles [38.6 km] to the southeast)
    • Windham
      (25 miles [40.2 km] to the east)
      • Note: The GPS coordinates that we are using for Windham have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Windham
      • Windham is located in Windham County
      • Population from the 2020 Census: 396 people
    • Windham
      (25 miles [40.2 km] to the east)
    • Londonderry
      (26 miles [41.8 km] to the east)
      • Note: The GPS coordinates that we are using for Londonderry have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Londonderry
      • Londonderry is located in Windham County
      • Population from the 2020 Census: 1,639 people
    • Wardsboro
      (26 miles [41.8 km] to the southeast)
      • Note: The GPS coordinates that we are using for Wardsboro have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wardsboro
      • Wardsboro is located in Windham County
      • Population from the 2020 Census: 828 people
    • Wardsboro
      (26 miles [41.8 km] to the southeast)
  • Windsor County
    • The following are listed by their distance from Rupert, with the one closest to Rupert listed first.
    • Weston
      (21 miles [33.8 km] to the east)
      • Note: The GPS coordinates that we are using for Weston have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Weston
      • Weston is located in Windsor County
      • Population from the 2020 Census: 542 people
    • Andover
      (25 miles [40.2 km] to the east)
      • Note: The GPS coordinates that we are using for Andover have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Andover
      • Andover is located in Windsor County
      • Population from the 2020 Census: 472 people
    • Simonsville
      (25 miles [40.2 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Simonsville. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Simonsville
      • Simonsville is located in Windsor County
      • Google driving directions:
      • From your current location to Simonsville
      • From Rupert to Simonsville
    • Andover
      (26 miles [41.8 km] to the east)
    • Ludlow
      (27 miles [43.5 km] to the east)
      • Note: The GPS coordinates that we are using for Ludlow have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ludlow
      • Ludlow is located in Windsor County
      • Population from the 2020 Census: 1,856 people
    • Ludlow
      (28 miles [45.1 km] to the east)
      • Note: The GPS coordinates that we are using for Ludlow have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ludlow
      • Ludlow is located in Windsor County
      • Population from the 2020 Census: 764 people
      • Jump to TripAdvisor's Tourism page for Ludlow <2>
    • Grahamville
      (28 miles [45.1 km] to the northeast)
    • Tyson
      (29 miles [46.7 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Tyson. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Tyson
      • Tyson is located in Windsor County
      • Google driving directions:
      • From your current location to Tyson
      • From Rupert to Tyson
    • Chester
      (30 miles [48.3 km] to the east)
      • Note: The GPS coordinates that we are using for Chester have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Chester
      • Chester is located in Windsor County
      • Population from the 2020 Census: 3,018 people
    • Proctorsville
      (30 miles [48.3 km] to the east)
    • Plymouth
      (30 miles [48.3 km] to the northeast)
      • Note: The GPS coordinates that we are using for Plymouth have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Plymouth
      • Plymouth is located in Windsor County
      • Population from the 2020 Census: 599 people
  • Rensselaer County (NY)
  • Saratoga County (NY)
    • The following are listed by their distance from Rupert, with the one closest to Rupert listed first.
    • Northumberland
      (20 miles [32.2 km] to the southwest)
    • Jewell Corner
      (20 miles [32.2 km] to the west)
    • South Glens Falls
      (20 miles [32.2 km] to the west)
    • Schuylerville
      (21 miles [33.8 km] to the southwest)
      • Note: The GPS coordinates that we are using for Schuylerville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Schuylerville
      • Schuylerville is located in Saratoga County (NY)
      • Population from the 2020 Census: 1,314 people
      • Jump to TripAdvisor's Tourism page for Schuylerville <2>
    • Village of Victory
      (21 miles [33.8 km] to the southwest)
      • Note: The GPS coordinates that we are using for Village of Victory have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Village of Victory
      • Village of Victory is located in Saratoga County (NY)
      • Population from the 2020 Census: 574 people
      • Village of Victory has also been known as:
      • Victory village
    • Grangerville
      (22 miles [35.4 km] to the southwest)
    • Victory Mills
      (22 miles [35.4 km] to the southwest)
    • Gansevoort
      (22 miles [35.4 km] to the west)
    • Gates
      (23 miles [37 km] to the southwest)
      • Note: The GPS coordinates that we are using for Gates have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Gates
      • Gates is located in Saratoga County (NY)
    • English Village
      (23 miles [37 km] to the west)
      • Note: The GPS coordinates that we are using for English Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for English Village
      • English Village is located in Saratoga County (NY)
    • Gurn Spring
      (25 miles [40.2 km] to the west)
    • Wilton
      (26 miles [41.8 km] to the west)
  • Warren County (NY)
  • Washington County (NY)

For an expanded list of the communities that are closest to Rupert, see our County-by-County Page for Rupert.

Cemeteries Near Rupert ...

Below are cemeteries that are in the vicinity of Rupert.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Rupert covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Rupert, with the one closest to Rupert listed first.

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<7>

The Rand McNally Atlas shows that Rupert had a population of 130 people in 1895 with a post office and railroad service.

These communities are listed based on their distance from Rupert, with the one closest to Rupert listed first.

  • West Rupert
    (Less than 2 miles to the southwest)
  • North Rupert
    (4 miles [6.4 km] to the northeast)
    • Note: The GPS coordinates that we are using for North Rupert have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for North Rupert
    • North Rupert is located in Bennington County
  • East Rupert
    (5 miles [8 km] to the east)
    • Note: The GPS coordinates that we are using for East Rupert have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for East Rupert
    • East Rupert is located in Bennington County
  • West Pawlet
    (6 miles [9.7 km] to the north)
    • Note: The GPS coordinates that we are using for West Pawlet have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for West Pawlet
    • West Pawlet is located in Rutland County
    • Jump to TripAdvisor's Tourism page for West Pawlet <2>
  • Dorset
    (6 miles [9.7 km] to the east)
  • Pawlet
    (6 miles [9.7 km] to the north)
    • Note: The GPS coordinates that we are using for Pawlet have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Pawlet
    • Pawlet is located in Rutland County
    • Jump to TripAdvisor's Tourism page for Pawlet <2>
  • North Hebron
    (6 miles [9.7 km] to the northwest)
  • West Hebron
    (7 miles [11.3 km] to the west)
    • Note: The GPS coordinates that we are using for West Hebron have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for West Hebron
    • West Hebron is located in Washington County (NY)
  • Sandgate
    (7 miles [11.3 km] to the south)
    • Note: The GPS coordinates that we are using for Sandgate have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sandgate
    • Sandgate is located in Bennington County
  • South Dorset
    (7 miles [11.3 km] to the east)
    • Note: The GPS coordinates that we are using for South Dorset have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for South Dorset
    • South Dorset is located in Bennington County
  • Salem
    (8 miles [12.9 km] to the southwest)
  • South Granville
    (8 miles [12.9 km] to the northwest)
    • Note: The GPS coordinates that we are using for South Granville have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for South Granville
    • South Granville is located in Washington County (NY)
  • Continue List   (19 more) ...
    • Belcher
      (8 miles [12.9 km] to the west)
    • East Hartford
      (9 miles [14.5 km] to the northwest)
    • Granville
      (10 miles [16.1 km] to the north)
      • Note: The GPS coordinates that we are using for Granville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Granville
      • Granville is located in Washington County (NY)
      • Population from the 2020 Census: 2,416 people
      • Jump to TripAdvisor's Tourism page for Granville <2>

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Rupert. See our List of 1890's Communities around Rupert.

Newspapers Published in Rupert ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 74 newspapers that have been published in the area around Rupert.

Although we're unaware of any newspapers that were published in the immediate area of Rupert, there are papers which were published within 18 miles [29 km]<6>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Rupert.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we start with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These professional and volunteer websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Rupert:

Unfortunately, we don't know of a website for Rupert. If you can help, please contact us through our Feedback Page.

The official website for State of Vermont: https://www.vermont.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<4>The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com.
<5>If we found a location and have questions about the accuracy of our information, we will simply say that the marker is 'in the vicinity'. We are not confident about the location and the position of our marker is only a rough guide. If we have too many doubts about the location, we will not include it in our database.
<6>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Rupert) to Point B.Our distance measurements begin at a specific point in Rupert. The point we use is located at these GPS coordinates - Latitude: 43.2598, Longitude: -73.2229    
<7>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Rupert, please let us know so that we can improve our accuracy.




 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 29 Apr 2025