|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Mt. Hope Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Mt. Hope Cemetery. For information of that nature, we recommend you visit Find-A-Grave's entry for the Mt. Hope Cemetery (FG ID #1095218). <1>
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<2> of the Mt. Hope Cemetery. We've listed the following communities based on their distance, with the closest first.
- Northfield Center
(Less than 2 miles to the east)
- Northfield
(Less than 2 miles to the north)
- Northfield
(Less than 2 miles to the northwest)
- Note: The GPS coordinates that we are using for Northfield have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Northfield
- Northfield is located in Washington County
- Population from the 2020 Census: 6,504 people
- Northfield Falls
(2 miles [3.2 km] to the north)
- Roxbury
(4 miles [6.4 km] to the southwest)
- Roxbury
(5 miles [8 km] to the southwest)
- Note: The GPS coordinates that we are using for Roxbury have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Roxbury
- Roxbury is located in Washington County
- Population from the 2020 Census: 709 people
- Berlin
(5 miles [8 km] to the northeast)
- Note: The GPS coordinates that we are using for Berlin have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Berlin
- Berlin is located in Washington County
- Population from the 2020 Census: 2,783 people
- Williamstown
(6 miles [9.7 km] to the east)
- Note: The GPS coordinates that we are using for Williamstown have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Williamstown
- Williamstown is located in Orange County
- Population from the 2020 Census: 3,530 people
- Williamstown
(6 miles [9.7 km] to the east)
- Note: The GPS coordinates that we are using for Williamstown have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Williamstown
- Williamstown is located in Orange County
- Jump to TripAdvisor's Tourism page for Williamstown <3>
- West Brookfield
(7 miles [11.3 km] to the south)
- Waitsfield
(7 miles [11.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Waitsfield have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Waitsfield
- Waitsfield is located in Washington County
- Population from the 2020 Census: 1,692 people
- Brookfield
(8 miles [12.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Brookfield have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brookfield
- Brookfield is located in Orange County
- Population from the 2020 Census: 1,343 people
- East Brookfield
(8 miles [12.9 km] to the southeast)
- Graniteville
(8 miles [12.9 km] to the east)
- South Barre
(8 miles [12.9 km] to the east)
- Note: The GPS coordinates that we are using for South Barre have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Barre
- South Barre is located in Washington County
- Waitsfield
(8 miles [12.9 km] to the northwest)
- Alpine Village
(9 miles [14.5 km] to the southwest)
- Moretown
(9 miles [14.5 km] to the north)
- Note: The GPS coordinates that we are using for Moretown have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Moretown
- Moretown is located in Washington County
- Population from the 2020 Census: 1,664 people
- Websterville
(9 miles [14.5 km] to the east)
- Barre
(9 miles [14.5 km] to the east)
- Note: The GPS coordinates that we are using for Barre have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Barre
- Barre is located in Washington County
- Population from the 2020 Census: 7,741 people
- Barre
(9 miles [14.5 km] to the northeast)
- Montpelier
(9 miles [14.5 km] to the northeast)
- Warren
(9 miles [14.5 km] to the west)
- Note: The GPS coordinates that we are using for Warren have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Warren
- Warren is located in Washington County
- Population from the 2020 Census: 1,667 people
- Warren
(9 miles [14.5 km] to the west)
- Middlesex
(10 miles [16.1 km] to the north)
Off-the-Road Links ...
The official website for State of Vermont: https://www.vermont.gov/
Footnotes ...
<1> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<2> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Mt. Hope Cemetery. The point we use is located at these GPS coordinates - Latitude: 44.1350, Longitude: -72.6615 |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<5> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|