|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Cox Brook - Glinnis Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Cox Brook - Glinnis Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Cox Brook - Glinnis Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Northfield Falls
(Less than 2 miles to the southeast)
- Northfield
(2 miles [3.2 km] to the southwest)
- Note: The GPS coordinates that we are using for Northfield have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Northfield
- Northfield is located in Washington County
- Population from the 2020 Census: 6,504 people
- Northfield
(2 miles [3.2 km] to the south)
- Northfield Center
(3 miles [4.8 km] to the south)
- Jump to our Gazetteer entry for Northfield Center
- Northfield Center is located in Washington County
- Berlin
(3 miles [4.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Berlin have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Berlin
- Berlin is located in Washington County
- Population from the 2020 Census: 2,783 people
- Moretown
(5 miles [8 km] to the northwest)
- Note: The GPS coordinates that we are using for Moretown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Moretown
- Moretown is located in Washington County
- Population from the 2020 Census: 1,664 people
- Montpelier
(6 miles [9.7 km] to the northeast)
- Waitsfield
(6 miles [9.7 km] to the west)
- Note: The GPS coordinates that we are using for Waitsfield have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Waitsfield
- Waitsfield is located in Washington County
- Population from the 2020 Census: 1,692 people
- Williamstown
(7 miles [11.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Williamstown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Williamstown
- Williamstown is located in Orange County
- Jump to TripAdvisor's Tourism page for Williamstown <2>
- Middlesex
(7 miles [11.3 km] to the north)
- Waitsfield
(7 miles [11.3 km] to the west)
- Roxbury
(8 miles [12.9 km] to the south)
- Note: The GPS coordinates that we are using for Roxbury have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Roxbury
- Roxbury is located in Washington County
- Population from the 2020 Census: 709 people
- Williamstown
(8 miles [12.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Williamstown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Williamstown
- Williamstown is located in Orange County
- Population from the 2020 Census: 3,530 people
- South Barre
(8 miles [12.9 km] to the east)
- Note: The GPS coordinates that we are using for South Barre have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Barre
- South Barre is located in Washington County
- Barre
(8 miles [12.9 km] to the east)
- Jump to our Gazetteer entry for Barre
- Barre is located in Washington County
- Population from the 2020 Census: 8,474 people
- Barre has also been known as:
- Barre City
- Jump to TripAdvisor's Tourism page for Barre <2>
- Middlesex
(8 miles [12.9 km] to the north)
- Note: The GPS coordinates that we are using for Middlesex have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Middlesex
- Middlesex is located in Washington County
- Population from the 2020 Census: 1,724 people
- Barre
(9 miles [14.5 km] to the east)
- Note: The GPS coordinates that we are using for Barre have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Barre
- Barre is located in Washington County
- Population from the 2020 Census: 7,741 people
- North Fayston
(9 miles [14.5 km] to the northwest)
- Jump to our Gazetteer entry for North Fayston
- North Fayston is located in Washington County
- Warren
(10 miles [16.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Warren have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Warren
- Warren is located in Washington County
- Population from the 2020 Census: 1,667 people
- Warren
(10 miles [16.1 km] to the southwest)
- Websterville
(10 miles [16.1 km] to the east)
- East Montpelier
(10 miles [16.1 km] to the northeast)
- Note: The GPS coordinates that we are using for East Montpelier have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for East Montpelier
- East Montpelier is located in Washington County
- Population from the 2020 Census: 2,560 people
- Duxbury
(10 miles [16.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Duxbury have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Duxbury
- Duxbury is located in Washington County
- Population from the 2020 Census: 1,307 people
- Fayston
(10 miles [16.1 km] to the west)
- Note: The GPS coordinates that we are using for Fayston have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fayston
- Fayston is located in Washington County
- Population from the 2020 Census: 1,338 people
- Jump to TripAdvisor's Tourism page for Fayston <2>
- Sugarbush Village
(11 miles [17.7 km] to the west)
- Note: The GPS coordinates that we are using for Sugarbush Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sugarbush Village
- Sugarbush Village is located in Washington County
- Alpine Village
(11 miles [17.7 km] to the southwest)
- Jump to our Gazetteer entry for Alpine Village
- Alpine Village is located in Washington County
- West Brookfield
(11 miles [17.7 km] to the south)
- Jump to our Gazetteer entry for West Brookfield
- West Brookfield is located in Orange County
- Mill Village
(11 miles [17.7 km] to the north)
- Note: The GPS coordinates that we are using for Mill Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mill Village
- Mill Village is located in Washington County
- Brookfield
(11 miles [17.7 km] to the south)
- Note: The GPS coordinates that we are using for Brookfield have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brookfield
- Brookfield is located in Orange County
- Population from the 2020 Census: 1,343 people
- Waterbury
(11 miles [17.7 km] to the northwest)
Off-the-Road Links ...
The official website for State of Vermont: https://www.vermont.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Cox Brook - Glinnis Cemetery. The point we use is located at these GPS coordinates - Latitude: 44.1878, Longitude: -72.6709 In this case, the coordinates for the Cox Brook - Glinnis Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|