Our Genealogy Helper
Introduction ...
We have a couple of goals for our Gazetteer:
- That it be a tool which helps us with planning our trips.
- We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
- On our trips, we try to visit those places where our ancestors left their footprints.
By learning about Panorama (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.
As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Panorama. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.
Neighboring Counties ...
When searching for family records, we have frequently made the mistake of not checking the neighboring counties.
For example, we have great-grandparents who lived in the southwest corner of their home county. During their lives, most hospitals were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the south.
So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived: their home county contained property and probate records; the county to the west contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.
If you're in a similar situation, we hope that the following information helps.
Panorama is located in Rappahannock County.
To see how the shape of Virginia's counties have changed over time, we recommend the Atlas of Historical County Boundaries.
The following counties adjoin and form the boundaries of Rappahannock County: Culpeper, Fauquier, Madison, Page & Warren.
Below are the counties that are near Panorama. For each of these counties, we show a sample of those communities that are closest to Panorama:
- Rappahannock County (The home county of Panorama)
- The following are listed by their distance from Panorama, with the one closest to Panorama listed first.
- Sperryville
(5 miles [8 km] to the east)
- Rediviva
(6 miles [9.7 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Rediviva. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Rediviva
- Rediviva is located in Rappahannock County
- Woodville
(8 miles [12.9 km] to the southeast)
- Jump to our Gazetteer entry for Woodville
- Woodville is located in Rappahannock County
- Washington
(9 miles [14.5 km] to the northeast)
- Scrabble
(10 miles [16.1 km] to the southeast)
- Jump to our Gazetteer entry for Scrabble
- Scrabble is located in Rappahannock County
- Slate Mills
(11 miles [17.7 km] to the southeast)
- Jump to our Gazetteer entry for Slate Mills
- Slate Mills is located in Rappahannock County
- Chester Gap
(16 miles [25.7 km] to the northeast)
- Jump to our Gazetteer entry for Chester Gap
- Chester Gap is located in Rappahannock County
- Reager
(16 miles [25.7 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Reager. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Reager
- Reager is located in Rappahannock County
- Amissville
(17 miles [27.4 km] to the east)
- Clarke County
- White Post
(29 miles [46.7 km] to the northeast)
- Culpeper County
- The following are listed by their distance from Panorama, with the one closest to Panorama listed first.
- Eggbornsville
(15 miles [24.1 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Eggbornsville. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Eggbornsville
- Eggbornsville is located in Culpeper County
- Homeland
(15 miles [24.1 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Homeland. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Homeland
- Homeland is located in Culpeper County
- Griffinsburg
(15 miles [24.1 km] to the southeast)
- Jump to our Gazetteer entry for Griffinsburg
- Griffinsburg is located in Culpeper County
- Norman
(17 miles [27.4 km] to the southeast)
- Jump to our Gazetteer entry for Norman
- Norman is located in Culpeper County
- Rixeyville
(19 miles [30.6 km] to the east)
- Jump to our Gazetteer entry for Rixeyville
- Rixeyville is located in Culpeper County
- Jeffersonton
(21 miles [33.8 km] to the east)
- Jump to our Gazetteer entry for Jeffersonton
- Jeffersonton is located in Culpeper County
- Culpeper
(21 miles [33.8 km] to the southeast)
- Elkwood
(27 miles [43.5 km] to the east)
- Fauquier County
- The following are listed by their distance from Panorama, with the one closest to Panorama listed first.
- Orlean
(20 miles [32.2 km] to the east)
- Waterloo
(22 miles [35.4 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Waterloo. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Waterloo
- Waterloo is located in Fauquier County
- Petersburg
(22 miles [35.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Petersburg have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Petersburg
- Petersburg is located in Fauquier County
- Turnbull
(24 miles [38.6 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Turnbull. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Turnbull
- Turnbull is located in Fauquier County
- Ada
(24 miles [38.6 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Ada. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Ada
- Ada is located in Fauquier County
- Markham
(24 miles [38.6 km] to the northeast)
- Delaplane
(27 miles [43.5 km] to the northeast)
- Opal
(28 miles [45.1 km] to the east)
- Jump to our Gazetteer entry for Opal
- Opal is located in Fauquier County
- Remington
(28 miles [45.1 km] to the east)
- Note: The GPS coordinates that we are using for Remington have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Remington
- Remington is located in Fauquier County
- Population from the 2020 Census: 661 people
- Jump to TripAdvisor's Tourism page for Remington <1>
- Warrenton
(28 miles [45.1 km] to the east)
- Marshall
(28 miles [45.1 km] to the northeast)
- Bealeton
(30 miles [48.3 km] to the east)
- Frederick County
- The following are listed by their distance from Panorama, with the one closest to Panorama listed first.
- Middletown
(25 miles [40.2 km] to the north)
- Note: The GPS coordinates that we are using for Middletown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Middletown
- Middletown is located in Frederick County
- Population from the 2020 Census: 1,424 people
- Jump to TripAdvisor's Tourism page for Middletown <1>
- Tulip
(26 miles [41.8 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Tulip. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Tulip
- Tulip is located in Frederick County
- Stephens City
(29 miles [46.7 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Stephens City. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Stephens City
- Stephens City is located in Frederick County
- Population from the 2020 Census: 2,106 people
- Jump to TripAdvisor's Tourism page for Stephens City <1>
- Armel
(30 miles [48.3 km] to the north)
- Jump to our Gazetteer entry for Armel
- Armel is located in Frederick County
- Greene County
- The following are listed by their distance from Panorama, with the one closest to Panorama listed first.
- Kinderhook
(20 miles [32.2 km] to the south)
- Jump to our Gazetteer entry for Kinderhook
- Kinderhook is located in Greene County
- Stanardsville
(25 miles [40.2 km] to the south)
- Note: The GPS coordinates that we are using for Stanardsville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stanardsville
- Stanardsville is located in Greene County
- Population from the 2020 Census: 393 people
- Jump to TripAdvisor's Tourism page for Stanardsville <1>
- Dawsonville
(27 miles [43.5 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Dawsonville. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Dawsonville
- Dawsonville is located in Greene County
- Quinque
(28 miles [45.1 km] to the south)
- Jump to our Gazetteer entry for Quinque
- Quinque is located in Greene County
- Amicus
(29 miles [46.7 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Amicus. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Amicus
- Amicus is located in Greene County
- Madison County
- The following are listed by their distance from Panorama, with the one closest to Panorama listed first.
- Peola Mills
(8 miles [12.9 km] to the southeast)
- Jump to our Gazetteer entry for Peola Mills
- Peola Mills is located in Madison County
- Syria
(11 miles [17.7 km] to the south)
- Tryme
(16 miles [25.7 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Tryme. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Tryme
- Tryme is located in Madison County
- Ruth
(18 miles [29 km] to the south)
- Jump to our Gazetteer entry for Ruth
- Ruth is located in Madison County
- Madison
(19 miles [30.6 km] to the south)
- Note: The GPS coordinates that we are using for Madison have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Madison
- Madison is located in Madison County
- Population from the 2020 Census: 238 people
- Jump to TripAdvisor's Tourism page for Madison <1>
- Wolftown
(20 miles [32.2 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Wolftown. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Wolftown
- Wolftown is located in Madison County
- Jump to TripAdvisor's Tourism page for Wolftown <1>
- Hood
(21 miles [33.8 km] to the south)
- Aroda
(23 miles [37 km] to the south)
- Jump to our Gazetteer entry for Aroda
- Aroda is located in Madison County
- Burnt Tree
(26 miles [41.8 km] to the south)
- Jump to our Gazetteer entry for Burnt Tree
- Burnt Tree is located in Madison County
- Madison Mills
(27 miles [43.5 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Madison Mills. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Madison Mills
- Madison Mills is located in Madison County
- Orange County
- The following are listed by their distance from Panorama, with the one closest to Panorama listed first.
- True Blue
(29 miles [46.7 km] to the southeast)
- Jump to our Gazetteer entry for True Blue
- True Blue is located in Orange County
- Montpelier Station
(30 miles [48.3 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Montpelier Station. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Montpelier Station
- Montpelier Station is located in Orange County
- Jump to TripAdvisor's Tourism page for Montpelier Station <1>
- Orange
(30 miles [48.3 km] to the south)
- Page County
- The following are listed by their distance from Panorama, with the one closest to Panorama listed first.
- Kimball
(4 miles [6.4 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Kimball. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Kimball
- Kimball is located in Page County
- Rileyville
(7 miles [11.3 km] to the northwest)
- Luray
(7 miles [11.3 km] to the west)
- Marksville
(10 miles [16.1 km] to the southwest)
- Jump to our Gazetteer entry for Marksville
- Marksville is located in Page County
- Stanley
(11 miles [17.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Stanley have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stanley
- Stanley is located in Page County
- Population from the 2020 Census: 1,676 people
- Jump to TripAdvisor's Tourism page for Stanley <1>
- Leaksville
(11 miles [17.7 km] to the west)
- Jump to our Gazetteer entry for Leaksville
- Leaksville is located in Page County
- Shenandoah
(20 miles [32.2 km] to the southwest)
- Note: The GPS coordinates that we are using for Shenandoah have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shenandoah
- Shenandoah is located in Page County
- Population from the 2020 Census: 2,334 people
- Jump to TripAdvisor's Tourism page for Shenandoah <1>
- Verbena
(20 miles [32.2 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Verbena. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Verbena
- Verbena is located in Page County
- Rockingham County
- The following are listed by their distance from Panorama, with the one closest to Panorama listed first.
- Plains Mill
(21 miles [33.8 km] to the west)
- Jump to our Gazetteer entry for Plains Mill
- Plains Mill is located in Rockingham County
- Elkton
(23 miles [37 km] to the southwest)
- Swift Run
(24 miles [38.6 km] to the southwest)
- Jump to our Gazetteer entry for Swift Run
- Swift Run is located in Rockingham County
- Mayland
(24 miles [38.6 km] to the west)
- Jump to our Gazetteer entry for Mayland
- Mayland is located in Rockingham County
- Timberville
(24 miles [38.6 km] to the west)
- Broadway
(25 miles [40.2 km] to the west)
- Lacey Spring
(25 miles [40.2 km] to the west)
- Jump to our Gazetteer entry for Lacey Spring
- Lacey Spring is located in Rockingham County
- Daphna
(26 miles [41.8 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Daphna. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Daphna
- Daphna is located in Rockingham County
- Berrytown
(27 miles [43.5 km] to the southwest)
- Jump to our Gazetteer entry for Berrytown
- Berrytown is located in Rockingham County
- Massanutten
(28 miles [45.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Massanutten have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Massanutten
- Massanutten is located in Rockingham County
- Jump to TripAdvisor's Tourism page for Massanutten <1>
- Melrose
(28 miles [45.1 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Melrose. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Melrose
- Melrose is located in Rockingham County
- Cootes Store
(28 miles [45.1 km] to the west)
- Jump to our Gazetteer entry for Cootes Store
- Cootes Store is located in Rockingham County
- Shenandoah County
- The following are listed by their distance from Panorama, with the one closest to Panorama listed first.
- Seven Fountains
(14 miles [22.5 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Seven Fountains. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Seven Fountains
- Seven Fountains is located in Shenandoah County
- Dilbeck
(16 miles [25.7 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Dilbeck. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Dilbeck
- Dilbeck is located in Shenandoah County
- Edinburg
(17 miles [27.4 km] to the northwest)
- Willow Grove
(17 miles [27.4 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Willow Grove. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Willow Grove
- Willow Grove is located in Shenandoah County
- Woodstock
(18 miles [29 km] to the northwest)
- Mount Jackson
(18 miles [29 km] to the west)
- Note: The GPS coordinates that we are using for Mount Jackson have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Jackson
- Mount Jackson is located in Shenandoah County
- Population from the 2020 Census: 2,144 people
- Jump to TripAdvisor's Tourism page for Mount Jackson <1>
- New Market
(18 miles [29 km] to the west)
- Calvary
(19 miles [30.6 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Calvary. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Calvary
- Calvary is located in Shenandoah County
- Rinkerton
(19 miles [30.6 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Rinkerton. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Rinkerton
- Rinkerton is located in Shenandoah County
- Toms Brook
(20 miles [32.2 km] to the north)
- Maurertown
(20 miles [32.2 km] to the northwest)
- Columbia Furnace
(22 miles [35.4 km] to the northwest)
- Jump to our Gazetteer entry for Columbia Furnace
- Columbia Furnace is located in Shenandoah County
- Warren County
- The following are listed by their distance from Panorama, with the one closest to Panorama listed first.
- Overall
(10 miles [16.1 km] to the north)
- Jump to our Gazetteer entry for Overall
- Overall is located in Warren County
- Bentonville
(11 miles [17.7 km] to the north)
- Limeton
(13 miles [20.9 km] to the north)
- Jump to our Gazetteer entry for Limeton
- Limeton is located in Warren County
- Viscose City
(18 miles [29 km] to the north)
- Note: The GPS coordinates that we are using for Viscose City have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Viscose City
- Viscose City is located in Warren County
- Front Royal
(19 miles [30.6 km] to the north)
- Royal Village
(19 miles [30.6 km] to the north)
- Note: The GPS coordinates that we are using for Royal Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Royal Village
- Royal Village is located in Warren County
- Riverton
(20 miles [32.2 km] to the north)
- Jump to our Gazetteer entry for Riverton
- Riverton is located in Warren County
- Applewood
(20 miles [32.2 km] to the northeast)
- Jump to our Gazetteer entry for Applewood
- Applewood is located in Warren County
- Happy Creek
(20 miles [32.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Happy Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Happy Creek
- Happy Creek is located in Warren County
- Cedarville
(23 miles [37 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Cedarville. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Cedarville
- Cedarville is located in Warren County
- Reliance
(24 miles [38.6 km] to the north)
- Jump to our Gazetteer entry for Reliance
- Reliance is located in Warren County
- Ashby
(26 miles [41.8 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Ashby. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Ashby
- Ashby is located in Warren County
For an expanded list of the communities that are closest to Panorama, see our County-by-County Page for Panorama.
Cemeteries Near Panorama ...
Below are cemeteries that are in the vicinity of Panorama.
This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.
If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).
If not found below, our Cemetery List for Panorama covers a larger area, with the cemeteries listed in alphabetical order.
The following cemeteries are listed based on their distance from Panorama, with the one closest to Panorama listed first.
- Beahm's Chapel Cemetery
(4 miles [6.4 km] to the west)
- Jump to our Gazetteer entry for the Beahm's Chapel Cemetery
- To give a relative sense of its location, the Beahm's Chapel Cemetery is a large cemetery that is located 2 miles [3.2 km]<4> to the west of Luray.
- Jump to Find-A-Grave: FG ID #49373 <5>
- Mt. Calvary Cemetery
(5 miles [8 km] to the west)
- Jump to our Gazetteer entry for the Mt. Calvary Cemetery
- Note: The GPS coordinates that we are using for the Mt. Calvary Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Antioch Cemetery
(6 miles [9.7 km] to the west)
- Jump to our Gazetteer entry for the Antioch Cemetery
- Note: The GPS coordinates that we are using for the Antioch Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Evergreen Cemetery
(6 miles [9.7 km] to the west)
- Jump to our Gazetteer entry for the Evergreen Cemetery
- Note: The GPS coordinates that we are using for the Evergreen Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Mt. Carmel Baptist Church Cemetery
(7 miles [11.3 km] to the southwest)
- Jump to our Gazetteer entry for the Mt. Carmel Baptist Church Cemetery
- Note: The GPS coordinates that we are using for the Mt. Carmel Baptist Church Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Marshall Cemetery
(7 miles [11.3 km] to the southwest)
- Jump to our Gazetteer entry for the Marshall Cemetery
- Note: The GPS coordinates that we are using for the Marshall Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Green Hill Cemetery
(7 miles [11.3 km] to the west)
- Jump to our Gazetteer entry for the Green Hill Cemetery
- Note: The GPS coordinates that we are using for the Green Hill Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Old County Cemetery
(7 miles [11.3 km] to the west)
- Jump to our Gazetteer entry for the Old County Cemetery
- Note: The GPS coordinates that we are using for the Old County Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Rileyville Cemetery
(8 miles [12.9 km] to the northwest)
- Jump to our Gazetteer entry for the Rileyville Cemetery
- Note: The GPS coordinates that we are using for the Rileyville Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Etlan Cemetery
(9 miles [14.5 km] to the south)
- Jump to our Gazetteer entry for the Etlan Cemetery
- Note: The GPS coordinates that we are using for the Etlan Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Cannon Family Cemetery
(10 miles [16.1 km] to the east)
- Brown Cemetery
(11 miles [17.7 km] to the south)
- Jump to our Gazetteer entry for the Brown Cemetery
- Note: The GPS coordinates that we are using for the Brown Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Continue List (282 more) ...
- Furnace Cemetery
(11 miles [17.7 km] to the northwest)
- Jump to our Gazetteer entry for the Furnace Cemetery
- Note: The GPS coordinates that we are using for the Furnace Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Gray Hollow Cemetery
(12 miles [19.3 km] to the southwest)
- Jump to our Gazetteer entry for the Gray Hollow Cemetery
- Note: The GPS coordinates that we are using for the Gray Hollow Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- St. Georges Cemetery
(12 miles [19.3 km] to the southwest)
- Jump to our Gazetteer entry for the St. Georges Cemetery
- Note: The GPS coordinates that we are using for the St. Georges Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
Nearby Communities in 1895 ...
We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<6>
While we didn't find Panorama in the Atlas, the following 1895 communities would have been found near the current location of Panorama.
These communities are listed based on their distance from Panorama, with the one closest to Panorama listed first.
- Kimball
(4 miles [6.4 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Kimball. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Kimball
- Kimball is located in Page County
- Sperryville
(5 miles [8 km] to the east)
- Stony Man
(6 miles [9.7 km] to the west)
- Note: The GPS coordinates that we are using for Stony Man have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stony Man
- Stony Man is located in Page County
- Nethers
(6 miles [9.7 km] to the south)
- Note: The GPS coordinates that we are using for Nethers have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nethers
- Nethers is located in Madison County
- Rediviva
(6 miles [9.7 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Rediviva. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Rediviva
- Rediviva is located in Rappahannock County
- Ida
(7 miles [11.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Ida have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ida
- Ida is located in Page County
- Hawlin
(7 miles [11.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Hawlin have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hawlin
- Hawlin is located in Rappahannock County
- Rileyville
(7 miles [11.3 km] to the northwest)
- Luray
(7 miles [11.3 km] to the west)
- Compton
(8 miles [12.9 km] to the north)
- Note: The GPS coordinates that we are using for Compton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Compton
- Compton is located in Page County
- Peola Mills
(8 miles [12.9 km] to the southeast)
- Jump to our Gazetteer entry for Peola Mills
- Peola Mills is located in Madison County
- Woodville
(8 miles [12.9 km] to the southeast)
- Jump to our Gazetteer entry for Woodville
- Woodville is located in Rappahannock County
- Continue List (15 more) ...
- Washington
(9 miles [14.5 km] to the northeast)
- Marksville
(10 miles [16.1 km] to the southwest)
- Jump to our Gazetteer entry for Marksville
- Marksville is located in Page County
- Leaksville
(11 miles [17.7 km] to the west)
- Jump to our Gazetteer entry for Leaksville
- Leaksville is located in Page County
We've also created an expanded list of communities that existed in the 1890's and were located in the area around Panorama. See our List of 1890's Communities around Panorama.
Newspapers Published in Panorama ...
An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).
To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.
Using information that we've taken from the Chronicling America website, we've identified 48 newspapers that have been published in the area around Panorama.
Although we're unaware of any newspapers that were published in the immediate area of Panorama, there are papers which were published within 18 miles [29 km]<4>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Panorama.
Websites to Help With Your Genealogy Research ...
When we do our genealogical research, we first visit the websites from Cyndi's List, FamilySearch and Genealogy Trails. These helpful websites offer the information directly or else point to where you can find it. Their information is open to everyone.
To help you get started, the following links will take you to the pages that are relevant to Panorama:
- Websites specific to Virginia
- Pages specific to Rappahannock County
- Genealogy information for nearby counties
- Clarke County
- Culpeper County
- Fauquier County
- Frederick County
- Greene County
- Madison County
- Orange County
- Page County
- Rockingham County
- Shenandoah County
- Warren County
- Cemetery Information and Directories for Virginia
Off-the-Road Links ...
Unfortunately, we don't know of a website for Panorama. If you can help, please contact us through our Feedback Page.
The official website for State of Virginia: https://www.virginia.gov/
Footnotes ...
<1> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Panorama) to Point B.Our distance measurements begin at a specific point in Panorama. The point we use is located at these GPS coordinates - Latitude: 38.6593, Longitude: -78.3214 In this case, the coordinates for Panorama have been provided by the Geographic Names Information System (GNIS). |
<5> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<6> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Panorama, please let us know so that we can improve our accuracy. |