|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Joynes Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Joynes Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Joynes Cemetery. We've listed the following communities based on their distance, with the closest first.
- Onancock
(Less than 2 miles to the northwest)
- Onley
(Less than 2 miles to the east)
- Tasley
(2 miles [3.2 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Tasley. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Tasley
- Tasley is located in Accomack County
- Jump to TripAdvisor's Tourism page for Tasley <2>
- Melfa
(3 miles [4.8 km] to the south)
- Crockett Town
(4 miles [6.4 km] to the west)
- Note: The GPS coordinates that we are using for Crockett Town have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Crockett Town
- Crockett Town is located in Accomack County
- Locustville
(4 miles [6.4 km] to the southeast)
- Accomac
(4 miles [6.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Accomac have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Accomac
- Accomac is located in Accomack County
- Population from the 2020 Census: 482 people
- Greenbush
(4 miles [6.4 km] to the northeast)
- Jump to our Gazetteer entry for Greenbush
- Greenbush is located in Accomack County
- Keller
(5 miles [8 km] to the south)
- Locust Mount
(6 miles [9.7 km] to the south)
- Jump to our Gazetteer entry for Locust Mount
- Locust Mount is located in Accomack County
- Wachapreague
(6 miles [9.7 km] to the southeast)
- Painter
(7 miles [11.3 km] to the south)
- Parksley
(7 miles [11.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Parksley have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Parksley
- Parksley is located in Accomack County
- Population from the 2020 Census: 805 people
- Jump to TripAdvisor's Tourism page for Parksley <2>
- Whitesville
(7 miles [11.3 km] to the northeast)
- Jump to our Gazetteer entry for Whitesville
- Whitesville is located in Accomack County
- Metompkin
(9 miles [14.5 km] to the northeast)
- Jump to our Gazetteer entry for Metompkin
- Metompkin is located in Accomack County
- Hopeton
(9 miles [14.5 km] to the northeast)
- Jump to our Gazetteer entry for Hopeton
- Hopeton is located in Accomack County
- Belle Haven
(10 miles [16.1 km] to the southwest)
- Savage Town
(10 miles [16.1 km] to the south)
- Note: The GPS coordinates that we are using for Savage Town have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Savage Town
- Savage Town is located in Accomack County
- Cats Bridge
(10 miles [16.1 km] to the south)
- Jump to our Gazetteer entry for Cats Bridge
- Cats Bridge is located in Accomack County
- Gargatha
(10 miles [16.1 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Gargatha. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Gargatha
- Gargatha is located in Accomack County
- Nelsonia
(11 miles [17.7 km] to the northeast)
- Jump to our Gazetteer entry for Nelsonia
- Nelsonia is located in Accomack County
- Bloxom
(11 miles [17.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Bloxom have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bloxom
- Bloxom is located in Accomack County
- Population from the 2020 Census: 366 people
- Jump to TripAdvisor's Tourism page for Bloxom <2>
- Exmore
(12 miles [19.3 km] to the south)
- Modest Town
(12 miles [19.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Modest Town have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Modest Town
- Modest Town is located in Accomack County
- Jump to TripAdvisor's Tourism page for Modest Town <2>
- Wardtown
(13 miles [20.9 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Wardtown. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Wardtown
- Wardtown is located in Northampton County
Off-the-Road Links ...
The official website for Accomack County: www.co.accomack.va.us/ The official website for State of Virginia: https://www.virginia.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Joynes Cemetery. The point we use is located at these GPS coordinates - Latitude: 37.6960, Longitude: -75.7402 In this case, the coordinates for the Joynes Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|