Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Adner in the Atlas, the following communities of the 1890's would have been found near the current location of Adner. The following communities are listed based on their distance, with the one closest to Adner listed first.
- Woods Crossroads
(Less than 2 miles to the southeast)
- Note: The GPS coordinates that we are using for Woods Crossroads have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Woods Crossroads
- Woods Crossroads is located in Gloucester County
- Plain View
(Less than 2 miles to the west)
- Note: We haven't been able to verify our GPS coordinates for Plain View. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Plain View
- Plain View is located in King and Queen County
- Google driving directions:
- From your current location to Plain View
- From Adner to Plain View
- Glenns
(4 miles [6.4 km] to the north)
- Ark
(5 miles [8 km] to the southeast)
- Sassafras
(6 miles [9.7 km] to the south)
- Note: The GPS coordinates that we are using for Sassafras have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sassafras
- Sassafras is located in Gloucester County
- New Upton
(6 miles [9.7 km] to the east)
- Note: The GPS coordinates that we are using for New Upton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Upton
- New Upton is located in Gloucester County
- Shacklefords
(6 miles [9.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Shacklefords have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shacklefords
- Shacklefords is located in King and Queen County
- Allmondsville
(7 miles [11.3 km] to the south)
- Note: The GPS coordinates that we are using for Allmondsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Allmondsville
- Allmondsville is located in Gloucester County
- Freeport
(7 miles [11.3 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Freeport. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Freeport
- Freeport is located in Gloucester County
- Google driving directions:
- From your current location to Freeport
- From Adner to Freeport
- Stormont
(7 miles [11.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Stormont have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stormont
- Stormont is located in Middlesex County
- Saluda
(7 miles [11.3 km] to the north)
- Gloucester Courthouse
(8 miles [12.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Gloucester Courthouse have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gloucester Courthouse
- Gloucester Courthouse is located in Gloucester County
- Mascot
(9 miles [14.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Mascot have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mascot
- Mascot is located in King and Queen County
- Harmony Village
(9 miles [14.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Harmony Village have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Harmony Village
- Harmony Village is located in Middlesex County
- Locust Hill
(9 miles [14.5 km] to the northeast)
- Cooper
(9 miles [14.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Cooper have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cooper
- Cooper is located in Middlesex County
- West Point
(9 miles [14.5 km] to the west)
- Note: The GPS coordinates that we are using for West Point have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West Point
- West Point is located in King William County
- Population from the 2020 Census: 3,310 people
- Jump to TripAdvisor's Tourism page for West Point <4>
- Clay Bank
(10 miles [16.1 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Clay Bank. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Clay Bank
- Clay Bank is located in Gloucester County
- Google driving directions:
- From your current location to Clay Bank
- From Adner to Clay Bank
- Urbanna
(10 miles [16.1 km] to the north)
- Shanghai
(10 miles [16.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Shanghai have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shanghai
- Shanghai is located in King and Queen County
- Barhamsville
(11 miles [17.7 km] to the west)
- Note: The GPS coordinates that we are using for Barhamsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Barhamsville
- Barhamsville is located in New Kent County
- Jump to TripAdvisor's Tourism page for Barhamsville <4>
- Roanes
(11 miles [17.7 km] to the southeast)
- Ware Neck
(11 miles [17.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Ware Neck have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ware Neck
- Ware Neck is located in Gloucester County
- Church View
(12 miles [19.3 km] to the north)
- Note: The GPS coordinates that we are using for Church View have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Church View
- Church View is located in Middlesex County
- Jump to TripAdvisor's Tourism page for Church View <4>
- Toano
(12 miles [19.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Toano have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Toano
- Toano is located in James City County
- Jump to TripAdvisor's Tourism page for Toano <4>
- Lightfoot
(12 miles [19.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Lightfoot have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lightfoot
- Lightfoot is located in James City County
- Jump to TripAdvisor's Tourism page for Lightfoot <4>
- Oaktree
(12 miles [19.3 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Oaktree. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Oaktree
- Oaktree is located in York County
- Google driving directions:
- From your current location to Oaktree
- From Adner to Oaktree
- White Marsh
(12 miles [19.3 km] to the southeast)
- Cobbs Creek
(12 miles [19.3 km] to the east)
- Note: The GPS coordinates that we are using for Cobbs Creek have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cobbs Creek
- Cobbs Creek is located in Mathews County
- Jump to TripAdvisor's Tourism page for Cobbs Creek <4>
- Wilton
(12 miles [19.3 km] to the east)
- Note: The GPS coordinates that we are using for Wilton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wilton
- Wilton is located in Middlesex County
- Little Plymouth
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Little Plymouth have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Little Plymouth
- Little Plymouth is located in King and Queen County
- Romancoke
(12 miles [19.3 km] to the northwest)
Off-the-Road Links ...
The official website for Gloucester County: www.co.gloucester.va.us/
The official website for State of Virginia: https://www.virginia.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Adner, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |