Census Data for Wellsville
Population ...
The most recent Census Estimate<1> was for 2019 and it gave Wellsville a population of 3,935 people.
The last Decennial Census<2> was in 2010, which gave Wellsville a population of 3,432 people.
The city of Wellsville is located in Cache County. The 2010 Census gave Cache County; a population of 112,656 people. This means that Wellsville had 3.05% of the county's total population, making it Cache's 8th most populous community.
At the same time, Utah had a population of 2,763,885 people, meaning that Wellsville had 0.12% of the total population of Utah - making it the state's 93rd most populous community.
Area ...
The 2010 Census shows that the sampling area for Wellsville has a total area of 6.61 square miles [17.1 km²]. Of this total, a small amount of the area is covered by water (0.01 square miles [0 km²]).
Cache County has a land area of 1,164 square miles [3,016.9 km²]. At 6.6 square miles [17.1 km²], Wellsville has 0.57% of the county's total land area.
- Continue Reading ...
- When the Census Bureau conducts a census for a city like Wellsville, they draw a boundary around the area in which they are going to conduct their count - this defines the sampling area (usually a polygon). The shape of the sampling area can be quite complex and it's important to keep in mind that the boundaries of the sampling area may or may not match the recognized boundaries of the city.
- Things like population, area and housing for Wellsville reflect the sampling area. Since the shape of the sampling area and the actual boundaries of Wellsville might be different, it's best to check with the U.S. Census Bureau to resolve any difference between the two.
- Not only does the sampling area define boundaries, it also has a GPS location (latitude & longitude) that indicates a point within the sampling area (usually the center of the polygon, known as the centroid). At the time of the 2010 Census, the sampling area was located at:
- Lat: 41° 37' 31" (or 41.63°)
- Lon: -111° 56' 20" (or -111.94°)
- More information on this topic and the changes between the 2000 Census and the 2010 Census can be found in the section for our Census-to-Census Observations ... (see below).
Housing Units ...
At the time of the 2010 Census, Wellsville had 1,048 Housing Units<3> and with its population of 3,432 people, this averages 3.27 people per Housing Unit.
- Continue Reading ...
- The 2010 Census shows Wellsville had a land area of 6.6 square miles [17.1 km²]. This translates to 158.5 Housing Units per square mile [61.2 housing units/km²].
- From the Census of 2000: Wellsville had 815 Housing Units, a population of 2,728 people and a land area of 6.35 square miles [16.5 km²]. This gives a density of 3.35 people per Housing Unit and 127.8 Housing Units per square mile [49.33 housing units/km²].
- Note: Repeating the caution above (under Population Density), be aware that when comparing Housing Units between the 2010 Census and the 2000 Census, there were changes in the sampling area for Wellsville and you need to be careful when comparing between the censuses. More information about these differences can be found in the section called Census-to-Census Observations ... (see below).
Cache County ...
Wellsville is located in Cache County<4>.
The county had a population of 112,656 people at the 2010 Census. With it's population of 3,432 people, Wellsville represented 3.05% of the county's total.
In addition, where the city of Wellsville has a population density of 519 people per square mile [200.4 people/km²], Cache County averages 96.7 people per square mile [37.34 people/km²].
For more information, please visit our Census Page for Cache County.
Census-to-Census Observations ...
Introduction ...
When the Census Bureau takes a census count (or enumeration) for Wellsville, they start by specifying the boundaries of the area to be counted. This area (or sampling area) is a polygon and its shape can be quite complex - it may or may not match the geographical boundaries of Wellsville. It's important to note that from one Census to the next, the shape and location of the polygon can change.
- Continue Reading ...
- Although we don't have specific information about the shape of the polygon for Wellsville or how it changed has over time, there is some information that can give us some hints. For example, since the shape of the sampling area is directly related to the shape of the polygon, any change to area probably indicates a new shape for the polygon.
- If you need precision or details about the methodology of the Census, you should visit the U.S. Census Bureau for a definitive answer.
Location ...
While generally coinciding with the GPS location (latitude/longitude) of Wellsville, the latitude and longitude given by the Census Bureau actually indicates the GPS location of the polygon for Wellsville.
- Continue Reading ...
- For the 2010 Census, the location was given as:
- Lat: 41.625291° (or 41°37'31" N)
- Lon: -111.938952° (or -111°56'20" W)
- For the 2000 Census, the location given was:
- Lat: 41.635552° (or 41°38'7" N)
- Lon: -111.932993° (or -111°55'58" W)
- The difference indicates that the U.S. Census Bureau moved the location of the polygon for the 2010 Census 4,078 feet to the southwest<5> of the location that was used in the 2000 Census.
- The U.S. Geological Survey (USGS) and the U.S. Board on Geographic Names (BGN) have assigned a unique GNIS identifier (#2412211) to Wellsville. This identifier also marks a GPS point on the map, and that point lies within the boundaries of Wellsville. The GNIS point has been mapped to the latitude/longitude:
- Lat: 41.625114° (or 41°37'30" N)
- Lon: -111.940070° (or -111°56'24" W)
- The GPS location given for the 2010 Census lies 311.4 feet to the east<6> of the point given by the GNIS for Wellsville. For more information about this and the relationship of the various Federal Codes, please visit our Misc Page for Wellsville.
Miscellaneous Information for Wellsville ...
The Federal government has assigned various identifying codes to each community, county and state. At one time or another, the US Census Bureau has used one (or more) of the following identifiers when referring to either Cache County or the city of Wellsville:
- The GNIS Codes ...
- The FIPS Codes ...
- An earlier (and largely obsolete) identification method was called the Federal Information Processing Standard (FIPS):
- State Code: 49 (Utah)
- County Code: 005 (Cache County)
- Place Code: 82620 (Wellsville)
- State & County Code: 49/005 (Utah / Cache County)
- State & Place Code: 49/82620 (Utah / Wellsville)
- Misc. Census Codes ...
- Wellsville is located in Census Region #4 (the West Region) and Division #8 (the Mountain Division).
For more information about the various Federal identification codes, please visit our Misc Page for Wellsville.
Off-the-Road Links ...
Unfortunately, we don't know of a website for Wellsville. If you can help, please contact us through our Feedback Page.
The official website for State of Utah: https://www.utah.gov/
The official website of the U.S. Census Bureau
The official website of the U.S. Board on Geographic Names (BGN)
The official website of the U.S. Geological Survey (USGS)
Footnotes ...
| <1> | Every year, the US Census Bureau creates a population estimate for the preceeding year. Keep in mind that this value is an estimate and not an actual count. The most recent Census estimate is for the year 2019. |
| <2> | Every 10 years (eg- 1990, 2000, 2010), the US Census Bureau conducts a Constitutionally-mandated count (or enumeration) of people living within the United States. This count is called a Decennial Census. The last Decennial Census was the 2010 Census, with the next one planned for 2020. |
| <3> | A Housing Unit is a broad term for those places where people live (whether occupied or temporarily vacant), such as a house, an apartment, a mobile home, or an area that is considered as a separate living quarter. Separate living quarters (consisting of one or more rooms) are considered to be those places where people live, sleep and eat separately from others and that have access to the outside (either directly or by a shared hallway). |
| <4> | If you're interested in how the shape of Utah's counties, including Cache, have changed over time, we recommend the Atlas of Historical County Boundaries. |
| <5> | The calculated bearing (or angle) to the 2010 Census location is 156 degrees and a distance of 4,078 feet. |
| <6> | The calculated bearing (or angle) to the GNIS point is 281 degrees and a distance of 311.4 feet. |