|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Spring Branch had a population of 74 people in 1895 with a post office and no railroad service. In 2020, Spring Branch had a population of 270 people.
The following communities are listed based on their distance from Spring Branch, with the one closest to Spring Branch listed first.
- Anhalt
(7 miles [11.3 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Anhalt. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Anhalt
- Anhalt is located in Comal County
- Smithson Valley
(7 miles [11.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Smithson Valley have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Smithson Valley
- Smithson Valley is located in Comal County
- Twin Sisters
(7 miles [11.3 km] to the north)
- Jump to our Gazetteer entry for Twin Sisters
- Twin Sisters is located in Blanco County
- Kendalia
(7 miles [11.3 km] to the northwest)
- Cranes Mill
(8 miles [12.9 km] to the east)
- Note: The GPS coordinates that we are using for Cranes Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cranes Mill
- Cranes Mill is located in Comal County
- Blanco
(14 miles [22.5 km] to the north)
- Sattler
(15 miles [24.1 km] to the east)
- Jump to our Gazetteer entry for Sattler
- Sattler is located in Comal County
- Van Raub
(17 miles [27.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Van Raub have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Van Raub
- Van Raub is located in Bexar County
- Sisterdale
(18 miles [29 km] to the west)
- Boerne
(19 miles [30.6 km] to the west)
- Leon Springs
(19 miles [30.6 km] to the southwest)
- Jump to our Gazetteer entry for Leon Springs
- Leon Springs is located in Bexar County
- Bracken
(20 miles [32.2 km] to the south)
- Jump to our Gazetteer entry for Bracken
- Bracken is located in Comal County
- Corbyn
(20 miles [32.2 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Corbyn. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Corbyn
- Corbyn is located in Comal County
- Wimberley
(20 miles [32.2 km] to the east)
- Welfare
(21 miles [33.8 km] to the west)
- Jump to our Gazetteer entry for Welfare
- Welfare is located in Kendall County
- Wetmore
(22 miles [35.4 km] to the south)
- Selma
(22 miles [35.4 km] to the south)
- New Braunfels
(22 miles [35.4 km] to the southeast)
- Waring
(23 miles [37 km] to the west)
- Cibolo
(24 miles [38.6 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Cibolo. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Cibolo
- Cibolo is located in Bexar County
- Population from the 2020 Census: 33,465 people
- Jump to TripAdvisor's Tourism page for Cibolo <4>
- Hunter
(24 miles [38.6 km] to the east)
- Jump to our Gazetteer entry for Hunter
- Hunter is located in Comal County
- Henly
(24 miles [38.6 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Henly. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Henly
- Henly is located in Hays County
- Robards
(25 miles [40.2 km] to the south)
- Note: The GPS coordinates that we are using for Robards have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Robards
- Robards is located in Bexar County
- Hye
(25 miles [40.2 km] to the north)
- Note: The GPS coordinates that we are using for Hye have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hye
- Hye is located in Blanco County
- Jump to TripAdvisor's Tourism page for Hye <4>
- Converse
(26 miles [41.8 km] to the south)
- Note: The GPS coordinates that we are using for Converse have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Converse
- Converse is located in Bexar County
- Population from the 2020 Census: 28,814 people
- Jump to TripAdvisor's Tourism page for Converse <4>
- Clear Springs
(26 miles [41.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Clear Springs have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clear Springs
- Clear Springs is located in Guadalupe County
- Johnson City
(26 miles [41.8 km] to the north)
Off-the-Road Links ...
The official website for Comal County: www.co.comal.tx.us/ The official website for State of Texas: https://texas.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Spring Branch, please let us know so that we can improve our accuracy. |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|