A Gazetteer for the United States and Canada

Roman Forest, Texas

Nearby Census Genealogy
Cemeteries Tidbits &
Other TX

Census Data for Roman Forest ...

Population ...

The most recent Census Estimate<1> was for 2018 and it gave Roman Forest a population of 1,977 people.

The last Decennial Census<2> was in 2010, which gave Roman Forest a population of 1,538 people.

The town of Roman Forest is located in Montgomery County. The 2010 Census gave Montgomery County a population of 455,746 people. This means that Roman Forest had 0.34% of the county's total population, making it Montgomery's 8th most populous community.

At the same time, Texas had a population of 25,145,561 people.

Area ...

When the Census Bureau conducts a census for a town like Roman Forest, they draw a boundary around the area in which they are going to conduct their count - this defines the sampling area (usually shaped as a polygon). The shape of the sampling area can be quite complex and it's important to keep in mind that the boundaries of the sampling area may or may not match the recognized boundaries of the town.

Things like the population, area and housing for Roman Forest reflect the sampling area. Since the shape of the sampling area and the actual boundaries of Roman Forest might be different, it's best to check with the U.S. Census Bureau to resolve any difference between the two.

The 2010 Census shows that the sampling area for Roman Forest has a total area of 1.51 square miles [3.9 km²]. Of this total, 1.48 square miles [3.8 km²] is land, with the balance (1.53%) being water (0.02 square miles [0.1 km²]).

Montgomery County has a land area of 1,041 square miles [2,698.1 km²]. At 1.48 square miles [3.8 km²], Roman Forest has 0.14% of the county's total land area.

Not only does the sampling area define boundaries, it also has a GPS location (latitude & longitude) that indicates a point within the sampling area (usually the center of the polygon, known as the centroid). At the time of the 2010 Census, the sampling area was located at:

Lat:   30° 10' 47"   (or 30.18°)             [Map]

Lon:   -95° 9' 33"   (or -95.16°)

More information on this topic and the changes between the 2000 Census and the 2010 Census can be found in the section for our Census-to-Census Observations ... (see below).

Population Density ...

Using the population (1,538 people) and land area (1.48 square miles [3.8 km²]) values from the 2010 Census, Roman Forest had a population density of 1,021 people per square mile [394.3 people/km²].

In comparison, the 2000 Census shows Roman Forest had a population of 1,279 people and a land area of 1.48 square miles [3.8 km²]. This gives a population density of 864 people per square mile [333.8 people/km²]

NOTE: Be aware that when comparing population density between the 2000 Census and the 2010 Census, there were changes in the sampling area for Roman Forest. You need to be careful when making such a comparison, the differences are likely to lead to an apple-to-oranges comparison. More information about the nature of these differences can be found in the section Census-to-Census Observations ... (see below).

Housing Units ...

At the time of the 2010 Census, Roman Forest had 574 Housing Units<3> and with its population of 1,538 people, this averages 2.68 people per Housing Unit.

The 2010 Census shows Roman Forest had a land area of 1.48 square miles [3.8 km²]. This translates to 381.1 Housing Units per square mile [147.2 housing units/km²].

From the Census of 2000: Roman Forest had 432 Housing Units, a population of 1,279 people and a land area of 1.48 square miles [3.8 km²]. This gives a density of 2.96 people per Housing Unit and 292 Housing Units per square mile [112.8 housing units/km²].

NOTE: Repeating the caution above (under Population Density), be aware that when comparing Housing Units between the 2000 and the 2010 Census, there were changes in the sampling area for Roman Forest and you need to be careful when comparing between the censuses. More information about the changes can be found in the section called Census-to-Census Observations ... (see below).

Montgomery County ...

The community of Roman Forest is located in Montgomery County.

The county had a population of 455,746 people at the 2010 Census. With it's population of 1,538 people, Roman Forest represented 0.34% of the county's total.

In addition, where the town of Roman Forest has a population density of 1,021 people per square mile [394.3 people/km²], Montgomery County averages 437.5 people per square mile [168.9 people/km²].

For more information, please visit our Census Page for Montgomery County.

Population Rings for Roman Forest ...

To help identify the number of people who live in Roman Forest and the surrounding area, we have drawn concentric rings centered on Roman Forest. We counted the number of communities within each ring and summed their populations.<4>

  Radius   No of
  Since 2010    
5 mi   [8 km]58,208+24.51%
10 mi   [16 km]58,208+24.51%
15 mi   [24 km]1034,353+11.09%
20 mi   [32 km]16137,230+36.94%
25 mi   [40 km]21158,781+32.78%
30 mi   [48 km]28201,855+27.19%

Census-to-Census Observations ...

Introduction ...

When the Census Bureau takes a census count (or enumeration) for Roman Forest, they start by specifying the boundaries of the area to be counted. This area (or sampling area) is a polygon and its shape can be quite complex - it may or may not match the geographical boundaries of Roman Forest. It's important to note that from one Census to the next, the shape and location of the polygon can change. If you need precision or details about the methodology of the Census, you should visit the U.S. Census Bureau for a definitive answer.

Area ...

The sampling area (or polygon) given for the 2010 Census is 1.81% larger than the 2000 Census.

The 2010 Census shows that the total area for Roman Forest was 1.51 square miles [3.9 km²]. Of this total, 1.48 square miles [3.8 km²] is land, with the balance (1.53%) being water (0.02 square miles [0.1 km²]).

The 2000 Census shows a total area of 1.48 square miles [3.8 km²]. Of this total, only a minor amount of the area is covered by water.

Location ...

While generally coinciding with the GPS location (latitude/longitude) of Roman Forest, the latitude and longitude given by the Census Bureau actually indicates the GPS location of the polygon for Roman Forest.

For the 2010 Census, the location was given as:

Lat:   30.179735°   (or 30°10'47" N)             [Map]

Lon:   -95.159275°   (or -95°9'33" W)

For the 2000 Census, the location given was:

Lat:   30.177744°   (or 30°10'39" N)             [Map]

Lon:   -95.156209°   (or -95°9'22" W)

The difference indicates that the U.S. Census Bureau moved the location of the polygon for the 2010 Census 1,208 feet to the northwest<5> of the location that was used in the 2000 Census.

The U.S. Geological Survey (USGS) and the U.S. Board on Geographic Names (BGN) have assigned a unique GNIS identifier (#2412573) to Roman Forest. This identifier also marks a GSP point on the map, and that point lies within the boundaries of Roman Forest. The GNIS point has been mapped to the latitude/longitude:

Lat:   30.179116°   (or 30°10'44" N)             [Map]

Lon:   -95.159319°   (or -95°9'33" W)

The GSP location given for the 2010 Census lies 226.1 feet to the north<6> of the point given by the GNIS for Roman Forest. For more information about this and the relationship of the various Federal Codes, please visit our Misc Page for Roman Forest.

Miscellaneous Information for Roman Forest ...

The Federal government has assigned various identifying codes to each community, county and state. At one time or another, the US Census Bureau has used one (or more) of the following identifiers when referring to either Montgomery County or the town of Roman Forest:

The GNIS Codes ...

The current system of identification is called the Geographic Names Information System (GNIS). The following GNIS codes relate to Roman Forest:

GNIS ID for Roman Forest: 2412573

GNIS ID for Montgomery County: 1383955

GNIS ID for Texas: 1779801

The FIPS Codes ...

An earlier (and largely obsolete) identification method was called the Federal Information Processing Standard (FIPS):

State Code: 48 (Texas)

County Code: 339 (Montgomery County)

Place Code: 63044 (Roman Forest)

State & County Code: 48/339 (Texas / Montgomery County)

State & Place Code: 48/63044 (Texas / Roman Forest)

Misc. Census Codes ...

Roman Forest is located in Census Region #3 (the South Region) and Division #7 (the West South-Central Division).

For more information about the various Federal identification codes, please visit our Misc Page for Roman Forest.

Other Roadside Stops ...

Find a Community in Texas

About Montgomery County

About Texas

Off-the-Road Links ...

The official website of the U.S. Census Bureau

Unfortunately, we don't know of a website for Roman Forest. If you can help, please contact us through our Feedback Page.

The official website for Montgomery County:

The official website for State of Texas:

The official website of the U.S. Board on Geographic Names (BGN)

The official website of the U.S. Geological Survey (USGS)

Footnotes ...

<1>Every year, the US Census Bureau creates a population estimate for the preceeding year. Keep in mind that this value is an estimate and not an actual count. The most recent Census estimate is for the year 2018.
<2>Every 10 years (eg- 1990, 2000, 2010), the US Census Bureau conducts a Constitutionally-mandated count (or enumeration) of people living within the United States. This count is called a Decennial Census. The last Decennial Census was the 2010 Census, with the next one planned for 2020.
<3>A Housing Unit is a broad term for those places where people live (whether occupied or temporarily vacant), such as a house, an apartment, a mobile home, or an area that is considered as a separate living quarter. Separate living quarters (consisting of one or more rooms) are considered to be those places where people live, sleep and eat separately from others and that have access to the outside (either directly or by a shared hallway).
<4>The communities in our count are those provided by the 2010 Census, so keep in mind that our population rings will only include the people living in those communities. Smaller communities usually don't participate directly in the Census and therefore they won't be included. While our count is a close approximation, it shouldn't be considered as a complete or accurate count.
<5>The calculated bearing (or angle) to the 2010 Census location is 53 degrees and a distance of 1,208 feet.
<6>The calculated bearing (or angle) to the GNIS point is 356 degrees and a distance of 226.1 feet.






Sitemap Privacy
of Use



Copyright 2019
All Rights Reserved

Please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write. Click here to contact us.

This page was last modified: 08 Jan 2020