|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Ridge in the Atlas, the following communities of the 1890's would have been found near the current location of Ridge. The following communities are listed based on their distance, with the one closest to Ridge listed first.
- Marquez
(7 miles [11.3 km] to the northeast)
- Bald Prairie
(8 miles [12.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Bald Prairie have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bald Prairie
- Bald Prairie is located in Robertson County
- New Baden
(9 miles [14.5 km] to the southwest)
- Seale
(11 miles [17.7 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Seale. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Seale
- Seale is located in Robertson County
- Google driving directions:
- From your current location to Seale
- From Ridge to Seale
- Franklin
(12 miles [19.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Franklin have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Franklin
- Franklin is located in Robertson County
- Population from the 2020 Census: 1,643 people
- Jump to TripAdvisor's Tourism page for Franklin <2>
- Headsville
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Headsville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Headsville
- Headsville is located in Robertson County
- Concord
(13 miles [20.9 km] to the northeast)
- Petteway
(13 miles [20.9 km] to the west)
- Note: The GPS coordinates that we are using for Petteway have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Petteway
- Petteway is located in Robertson County
- Oletha
(15 miles [24.1 km] to the north)
- Note: The GPS coordinates that we are using for Oletha have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oletha
- Oletha is located in Limestone County
- Nesbitt
(16 miles [25.7 km] to the west)
- Note: The GPS coordinates that we are using for Nesbitt have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nesbitt
- Nesbitt is located in Robertson County
- Wheelock
(17 miles [27.4 km] to the south)
- Jewett
(18 miles [29 km] to the northeast)
- Elliot
(19 miles [30.6 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Elliot. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Elliot
- Elliot is located in Robertson County
- Google driving directions:
- From your current location to Elliot
- From Ridge to Elliot
- Leona
(20 miles [32.2 km] to the east)
- Note: The GPS coordinates that we are using for Leona have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Leona
- Leona is located in Leon County
- Population from the 2020 Census: 179 people
- Jump to TripAdvisor's Tourism page for Leona <2>
- Bremond
(20 miles [32.2 km] to the west)
- Centerville
(21 miles [33.8 km] to the east)
- Farrar
(21 miles [33.8 km] to the north)
- Kosse
(21 miles [33.8 km] to the northwest)
- Zulch ‑ Historic
(22 miles [35.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Zulch came from an uncertain source and they still need to be verified:<5>
- Jump to our Gazetteer entry for Zulch
- Zulch is located in Madison County
- Calvert
(23 miles [37 km] to the southwest)
- Thornton
(23 miles [37 km] to the northwest)
- Hammond
(23 miles [37 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Hammond. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Hammond
- Hammond is located in Robertson County
- Google driving directions:
- From your current location to Hammond
- From Ridge to Hammond
- Hearne
(24 miles [38.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Hearne have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hearne
- Hearne is located in Robertson County
- Population from the 2020 Census: 4,340 people
- Jump to TripAdvisor's Tourism page for Hearne <2>
- Tabor
(24 miles [38.6 km] to the south)
- Kurten
(24 miles [38.6 km] to the south)
Off-the-Road Links ...
The official website for State of Texas: https://texas.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Ridge, please let us know so that we can improve our accuracy. |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<5> | If we found a location and have questions about the accuracy of our information, we will simply say that the marker is 'in the vicinity'. We are not confident about the location and the position of our marker is only a rough guide. If we have too many doubts about the location, we will not include it in our database. |
|
|