|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that in 1895, Norse had a post office and no railroad service.
The following communities are listed based on their distance from Norse, with the one closest to Norse listed first.
- Clifton
(5 miles [8 km] to the east)
- Note: The GPS coordinates that we are using for Clifton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clifton
- Clifton is located in Bosque County
- Population from the 2020 Census: 3,410 people
- Jump to TripAdvisor's Tourism page for Clifton <3>
- Mosheim
(9 miles [14.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Mosheim have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mosheim
- Mosheim is located in Bosque County
- Cranfills Gap
(9 miles [14.5 km] to the west)
- Turnersville
(10 miles [16.1 km] to the south)
- Womack
(11 miles [17.7 km] to the northeast)
- Meridian
(11 miles [17.7 km] to the north)
- Note: The GPS coordinates that we are using for Meridian have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Meridian
- Meridian is located in Bosque County
- Population from the 2020 Census: 1,502 people
- Jump to TripAdvisor's Tourism page for Meridian <3>
- Cayote
(12 miles [19.3 km] to the east)
- Note: The GPS coordinates that we are using for Cayote have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cayote
- Cayote is located in Bosque County
- Valley Mills
(13 miles [20.9 km] to the southeast)
- Coryell
(14 miles [22.5 km] to the south)
- Note: The GPS coordinates that we are using for Coryell have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Coryell
- Coryell is located in Coryell County
- Jonesboro
(15 miles [24.1 km] to the southwest)
- Lanham
(16 miles [25.7 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Lanham. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Lanham
- Lanham is located in Hamilton County
- Google driving directions:
- From your current location to Lanham
- From Norse to Lanham
- Osage
(17 miles [27.4 km] to the south)
- Note: The GPS coordinates that we are using for Osage have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Osage
- Osage is located in Coryell County
- Morgan
(18 miles [29 km] to the north)
- Greenock
(19 miles [30.6 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Greenock. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Greenock
- Greenock is located in Bosque County
- Google driving directions:
- From your current location to Greenock
- From Norse to Greenock
- Iredell
(19 miles [30.6 km] to the northwest)
- Note: The GPS coordinates that we are using for Iredell have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Iredell
- Iredell is located in Bosque County
- Population from the 2020 Census: 340 people
- Jump to TripAdvisor's Tourism page for Iredell <3>
- Fairy
(19 miles [30.6 km] to the west)
- Note: The GPS coordinates that we are using for Fairy have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fairy
- Fairy is located in Hamilton County
- Levita
(20 miles [32.2 km] to the southwest)
- Crawford
(20 miles [32.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Crawford have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Crawford
- Crawford is located in McLennan County
- Population from the 2020 Census: 870 people
- Jump to TripAdvisor's Tourism page for Crawford <3>
- Walnut Springs
(21 miles [33.8 km] to the north)
- Note: The GPS coordinates that we are using for Walnut Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Walnut Springs
- Walnut Springs is located in Bosque County
- Population from the 2020 Census: 877 people
- Jump to TripAdvisor's Tourism page for Walnut Springs <3>
- Gatesville
(22 miles [35.4 km] to the south)
- China Spring
(22 miles [35.4 km] to the east)
- Kopperl
(23 miles [37 km] to the northeast)
- Fort Gates
(24 miles [38.6 km] to the south)
- Note: The GPS coordinates that we are using for Fort Gates have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fort Gates
- Fort Gates is located in Coryell County
- Whitney
(24 miles [38.6 km] to the northeast)
- Purmela
(25 miles [40.2 km] to the southwest)
- Note: The GPS coordinates that we are using for Purmela have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Purmela
- Purmela is located in Coryell County
- Jump to TripAdvisor's Tourism page for Purmela <3>
- Pecan Grove ‑ Historic
(25 miles [40.2 km] to the south)
- Note: The GPS coordinates that we are using for Pecan Grove have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pecan Grove
- Pecan Grove is located in Coryell County
- Oglesby
(25 miles [40.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Oglesby have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oglesby
- Oglesby is located in Coryell County
- Population from the 2020 Census: 464 people
- Jump to TripAdvisor's Tourism page for Oglesby <3>
- Patrick
(25 miles [40.2 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Patrick. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Patrick
- Patrick is located in McLennan County
- Google driving directions:
- From your current location to Patrick
- From Norse to Patrick
- Tyson
(25 miles [40.2 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Tyson. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Tyson
- Tyson is located in Hill County
- Google driving directions:
- From your current location to Tyson
- From Norse to Tyson
Off-the-Road Links ...
The official website for State of Texas: https://texas.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Norse, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|