|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Nesbitt had a population of 218 people in 1895 with a post office and no railroad service.
The following communities are listed based on their distance from Nesbitt, with the one closest to Nesbitt listed first.
- Petteway
(6 miles [9.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Petteway have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Petteway
- Petteway is located in Robertson County
- Bremond
(6 miles [9.7 km] to the northwest)
- Hammond
(6 miles [9.7 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Hammond. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Hammond
- Hammond is located in Robertson County
- Franklin
(8 miles [12.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Franklin have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Franklin
- Franklin is located in Robertson County
- Population from the 2020 Census: 1,643 people
- Jump to TripAdvisor's Tourism page for Franklin <3>
- Calvert
(9 miles [14.5 km] to the southwest)
- Elliot
(10 miles [16.1 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Elliot. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Elliot
- Elliot is located in Robertson County
- New Baden
(10 miles [16.1 km] to the east)
- Bald Prairie
(12 miles [19.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Bald Prairie have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bald Prairie
- Bald Prairie is located in Robertson County
- Headsville
(12 miles [19.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Headsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Headsville
- Headsville is located in Robertson County
- Reagan
(13 miles [20.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Reagan have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Reagan
- Reagan is located in Falls County
- Jump to TripAdvisor's Tourism page for Reagan <3>
- Baileyville
(14 miles [22.5 km] to the west)
- Jump to our Gazetteer entry for Baileyville
- Baileyville is located in Milam County
- Kosse
(14 miles [22.5 km] to the north)
- Hearne
(15 miles [24.1 km] to the south)
- Note: The GPS coordinates that we are using for Hearne have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hearne
- Hearne is located in Robertson County
- Population from the 2020 Census: 4,340 people
- Jump to TripAdvisor's Tourism page for Hearne <3>
- Jones Prairie
(16 miles [25.7 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Jones Prairie. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Jones Prairie
- Jones Prairie is located in Milam County
- Wilderville
(16 miles [25.7 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Wilderville. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Wilderville
- Wilderville is located in Falls County
- Branchville
(17 miles [27.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Branchville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Branchville
- Branchville is located in Milam County
- Stranger
(17 miles [27.4 km] to the northwest)
- Jump to our Gazetteer entry for Stranger
- Stranger is located in Falls County
- Wheelock
(18 miles [29 km] to the southeast)
- Sutton
(19 miles [30.6 km] to the south)
- Note: The GPS coordinates that we are using for Sutton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sutton
- Sutton is located in Robertson County
- Seale
(19 miles [30.6 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Seale. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Seale
- Seale is located in Robertson County
- Clarkson
(20 miles [32.2 km] to the west)
- Note: The GPS coordinates that we are using for Clarkson have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clarkson
- Clarkson is located in Milam County
- Maysfield
(20 miles [32.2 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Maysfield. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Maysfield
- Maysfield is located in Milam County
- Jump to TripAdvisor's Tourism page for Maysfield <3>
- Oletha
(20 miles [32.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Oletha have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oletha
- Oletha is located in Limestone County
- Thornton
(21 miles [33.8 km] to the north)
- Gause
(22 miles [35.4 km] to the south)
- Marquez
(22 miles [35.4 km] to the northeast)
- McClanahan
(22 miles [35.4 km] to the northwest)
- Note: The GPS coordinates that we are using for McClanahan have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McClanahan
- McClanahan is located in Falls County
- Marlin
(22 miles [35.4 km] to the northwest)
- Rosebud
(22 miles [35.4 km] to the west)
Off-the-Road Links ...
The official website for State of Texas: https://texas.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Nesbitt, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|