RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Texas >> Trinity County >> Mill Town >> Census DataIndex...










Learn About
The Commemorative
Quarter for
Texas


The Commemorative Quarter for Texas







Census Data for Mill Town

As far as we can tell, Mill Town has not been included in past Census counts, so there is no population information for this community.

While we don't have census information for Mill Town, you might be interested in some nearby communities where we do:

  • Trinity
    (Less than 2 miles to the south)
  • Riverside
    (7 miles [11.3 km] to the south)
    • Note: The GPS coordinates that we are using for Riverside have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Riverside
    • Riverside is located in Walker County
    • Jump to TripAdvisor's Tourism page for Riverside <1>
  • Lovelady
    (12 miles [19.3 km] to the north)
    • Note: The GPS coordinates that we are using for Lovelady have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lovelady
    • Lovelady is located in Houston County
    • Jump to TripAdvisor's Tourism page for Lovelady <1>
  • Oakhurst
    (15 miles [24.1 km] to the south)
    • Note: The GPS coordinates that we are using for Oakhurst have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Oakhurst
    • Oakhurst is located in San Jacinto County
    • Jump to TripAdvisor's Tourism page for Oakhurst <1>
  • Groveton
    (16 miles [25.7 km] to the northeast)
  • Point Blank
    (17 miles [27.4 km] to the southeast)
  • Onalaska
    (18 miles [29 km] to the southeast)
    • Note: The GPS coordinates that we are using for Onalaska have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Onalaska
    • Onalaska is located in Polk County
    • Jump to TripAdvisor's Tourism page for Onalaska <1>
  • Huntsville
    (19 miles [30.6 km] to the southwest)
  • Midway
    (22 miles [35.4 km] to the west)
  • Crockett
    (25 miles [40.2 km] to the north)
    • Note: The GPS coordinates that we are using for Crockett have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Crockett
    • Crockett is located in Houston County
    • Jump to TripAdvisor's Tourism page for Crockett <1>
  • Coldspring
    (29 miles [46.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for Coldspring have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Coldspring
    • Coldspring is located in San Jacinto County
    • Jump to TripAdvisor's Tourism page for Coldspring <1>
  • Kennard
    (29 miles [46.7 km] to the north)
    • Note: The GPS coordinates that we are using for Kennard have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Kennard
    • Kennard is located in Houston County
    • Jump to TripAdvisor's Tourism page for Kennard <1>
  • Continue List   (114 more) ...
    • New Waverly
      (29 miles [46.7 km] to the south)
      • Note: The GPS coordinates that we are using for New Waverly have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for New Waverly
      • New Waverly is located in Walker County
      • Jump to TripAdvisor's Tourism page for New Waverly <1>
    • Latexo
      (30 miles [48.3 km] to the north)

Trinity County ...

Mill Town is located in Trinity County<3>.

For more information, please visit our Census Page for Trinity County.

Miscellaneous Information for Mill Town ...

The Federal government has assigned various identifying codes to each community, county and state. At one time or another, the US Census Bureau has used one (or more) of the following identifiers when referring to either Trinity County or the community of Mill Town:

  • The GNIS Codes ...
    • The current system of identification is called the Geographic Names Information System (GNIS). The following GNIS codes relate to Mill Town:
    • GNIS ID for Mill Town: 1374954
    • GNIS ID for Trinity County: 1384013
    • GNIS ID for State of Texas: 1779801
  • The FIPS Codes ...
    • An earlier (and largely obsolete) identification method was called the Federal Information Processing Standard (FIPS):
    • State Code: 48 (Texas)
    • County Code: 455 (Trinity County)
    • Place Code: 48570 (Mill Town)
    • State & County Code: 48/455 (Texas / Trinity County)
    • State & Place Code: 48/48570 (Texas / Mill Town)
  • Misc. Census Codes ...
    • Mill Town is located in Census Region #3 (the South Region) and Division #7 (the West South-Central Division).

For more information about the various Federal identification codes, please visit our Misc Page for Mill Town.

Unfortunately, we don't know of a website for Mill Town. If you can help, please contact us through our Feedback Page.

The official website for State of Texas: https://texas.gov/

The official website of the U.S. Board on Geographic Names (BGN)

The official website of the U.S. Geological Survey (USGS)

Footnotes ...

<1>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>If you're interested in how the shape of Texas' counties, including Trinity, have changed over time, we recommend the Atlas of Historical County Boundaries.









 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024