RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Texas >> Hill County >> Hubbard >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Texas

The Commemorative Quarter for Texas





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Hubbard (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Hubbard. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the southwest corner of their home county. During their lives, most doctors were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the south.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the west contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Hubbard is located in Hill County.

To see how the shape of Texas' counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Hill County: Bosque, Ellis, Johnson, Limestone, McLennan & Navarro.

Below are the counties that are near Hubbard. For each of these counties, we show a sample of those communities that are closest to Hubbard:

  • Hill County     (The home county of Hubbard)
    • The following are listed by their distance from Hubbard, with the one closest to Hubbard listed first.
    • Malone
      (7 miles [11.3 km] to the northwest)
      • Note: The GPS coordinates that we are using for Malone have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Malone
      • Malone is located in Hill County
      • Population from the 2020 Census: 285 people
      • Jump to TripAdvisor's Tourism page for Malone <2>
    • Mount Calm
      (7 miles [11.3 km] to the southwest)
      • Note: The GPS coordinates that we are using for Mount Calm have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mount Calm
      • Mount Calm is located in Hill County
      • Population from the 2020 Census: 340 people
      • Jump to TripAdvisor's Tourism page for Mount Calm <2>
    • Penelope
      (7 miles [11.3 km] to the west)
    • Irene
      (10 miles [16.1 km] to the northwest)
      • Note: The GPS coordinates that we are using for Irene have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Irene
      • Irene is located in Hill County
      • Jump to TripAdvisor's Tourism page for Irene <2>
    • Bynum
      (14 miles [22.5 km] to the northwest)
      • Note: The GPS coordinates that we are using for Bynum have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bynum
      • Bynum is located in Hill County
      • Population from the 2020 Census: 208 people
      • Jump to TripAdvisor's Tourism page for Bynum <2>
    • Mertens
      (15 miles [24.1 km] to the north)
      • Note: The GPS coordinates that we are using for Mertens have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mertens
      • Mertens is located in Hill County
      • Population from the 2020 Census: 131 people
      • Jump to TripAdvisor's Tourism page for Mertens <2>
    • Brandon
      (16 miles [25.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Brandon have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Brandon
      • Brandon is located in Hill County
      • Jump to TripAdvisor's Tourism page for Brandon <2>
    • Abbott
      (16 miles [25.7 km] to the west)
    • Chatt
      (18 miles [29 km] to the west)
      • Jump to our Gazetteer entry for Chatt
      • Chatt is located in Hill County
    • Carl's Corner
      (22 miles [35.4 km] to the northwest)
      • Note: The GPS coordinates that we are using for Carl's Corner have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Carl's Corner
      • Carl's Corner is located in Hill County
      • Population from the 2020 Census: 199 people
    • Hillsboro
      (22 miles [35.4 km] to the northwest)
    • Aquilla
      (24 miles [38.6 km] to the west)
    • Lovelace
      (25 miles [40.2 km] to the northwest)
      • Jump to our Gazetteer entry for Lovelace
      • Lovelace is located in Hill County
  • Ellis County
    • The following are listed by their distance from Hubbard, with the one closest to Hubbard listed first.
    • Milford
      (20 miles [32.2 km] to the northwest)
      • Note: The GPS coordinates that we are using for Milford have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Milford
      • Milford is located in Ellis County
      • Population from the 2020 Census: 756 people
      • Jump to TripAdvisor's Tourism page for Milford <2>
    • Italy
      (23 miles [37 km] to the north)
      • Note: The GPS coordinates that we are using for Italy have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Italy
      • Italy is located in Ellis County
      • Population from the 2020 Census: 1,964 people
      • Jump to TripAdvisor's Tourism page for Italy <2>
    • Avalon
      (24 miles [38.6 km] to the north)
      • Note: The GPS coordinates that we are using for Avalon have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Avalon
      • Avalon is located in Ellis County
      • Jump to TripAdvisor's Tourism page for Avalon <2>
    • Forreston
      (28 miles [45.1 km] to the north)
    • Nash
      (28 miles [45.1 km] to the north)
      • Jump to our Gazetteer entry for Nash
      • Nash is located in Ellis County
    • Bardwell
      (29 miles [46.7 km] to the north)
      • Note: The GPS coordinates that we are using for Bardwell have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bardwell
      • Bardwell is located in Ellis County
      • Population from the 2020 Census: 709 people
      • Jump to TripAdvisor's Tourism page for Bardwell <2>
    • Howard
      (30 miles [48.3 km] to the north)
      • Jump to our Gazetteer entry for Howard
      • Howard is located in Ellis County
  • Falls County
    • The following are listed by their distance from Hubbard, with the one closest to Hubbard listed first.
    • Otto
      (27 miles [43.5 km] to the south)
      • Note: The GPS coordinates that we are using for Otto have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Otto
      • Otto is located in Falls County
      • Jump to TripAdvisor's Tourism page for Otto <2>
    • Perry
      (30 miles [48.3 km] to the south)
      • Note: The GPS coordinates that we are using for Perry have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Perry
      • Perry is located in Falls County
      • Jump to TripAdvisor's Tourism page for Perry <2>
  • Freestone County
    • The following are listed by their distance from Hubbard, with the one closest to Hubbard listed first.
    • Wortham
      (20 miles [32.2 km] to the east)
      • Note: The GPS coordinates that we are using for Wortham have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wortham
      • Wortham is located in Freestone County
      • Population from the 2020 Census: 1,007 people
      • Jump to TripAdvisor's Tourism page for Wortham <2>
    • Kirvin
      (28 miles [45.1 km] to the east)
    • Streetman
      (28 miles [45.1 km] to the east)
    • Cotton Gin
      (28 miles [45.1 km] to the southeast)
  • Limestone County
    • The following are listed by their distance from Hubbard, with the one closest to Hubbard listed first.
    • Delia ‑ Historic
      (9 miles [14.5 km] to the south)
      • Note: The GPS coordinates that we are using for Delia have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Delia
      • Delia is located in Limestone County
    • Coolidge
      (10 miles [16.1 km] to the southeast)
      • Note: The GPS coordinates that we are using for Coolidge have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Coolidge
      • Coolidge is located in Limestone County
      • Population from the 2020 Census: 950 people
      • Jump to TripAdvisor's Tourism page for Coolidge <2>
    • Prairie Hill
      (13 miles [20.9 km] to the south)
      • Note: The GPS coordinates that we are using for Prairie Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Prairie Hill
      • Prairie Hill is located in Limestone County
      • Jump to TripAdvisor's Tourism page for Prairie Hill <2>
    • Watt
      (14 miles [22.5 km] to the south)
      • Jump to our Gazetteer entry for Watt
      • Watt is located in Limestone County
    • Frosa
      (16 miles [25.7 km] to the south)
      • Jump to our Gazetteer entry for Frosa
      • Frosa is located in Limestone County
    • Tehuacana
      (16 miles [25.7 km] to the southeast)
    • Mexia
      (21 miles [33.8 km] to the southeast)
      • Jump to our Gazetteer entry for Mexia
      • Mexia is located in Limestone County
      • Population from the 2020 Census: 7,287 people
      • Jump to TripAdvisor's Tourism page for Mexia <2>
    • Groesbeck
      (27 miles [43.5 km] to the southeast)
    • Fallon
      (29 miles [46.7 km] to the southeast)
      • Jump to our Gazetteer entry for Fallon
      • Fallon is located in Limestone County
  • McLennan County
    • The following are listed by their distance from Hubbard, with the one closest to Hubbard listed first.
    • Leroy
      (15 miles [24.1 km] to the southwest)
      • Note: The GPS coordinates that we are using for Leroy have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Leroy
      • Leroy is located in McLennan County
      • Population from the 2020 Census: 346 people
      • Jump to TripAdvisor's Tourism page for Leroy <2>
    • Tours
      (15 miles [24.1 km] to the southwest)
      • Jump to our Gazetteer entry for Tours
      • Tours is located in McLennan County
    • Axtell
      (16 miles [25.7 km] to the southwest)
    • Elk
      (17 miles [27.4 km] to the southwest)
      • Jump to our Gazetteer entry for Elk
      • Elk is located in McLennan County
    • West
      (17 miles [27.4 km] to the west)
      • Note: The GPS coordinates that we are using for West have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for West
      • West is located in McLennan County
      • Population from the 2020 Census: 2,969 people
      • Jump to TripAdvisor's Tourism page for West <2>
    • Hallsburg
      (19 miles [30.6 km] to the south)
      • Note: The GPS coordinates that we are using for Hallsburg have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hallsburg
      • Hallsburg is located in McLennan County
      • Population from the 2020 Census: 454 people
    • Ross
      (20 miles [32.2 km] to the southwest)
      • Note: The GPS coordinates that we are using for Ross have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ross
      • Ross is located in McLennan County
      • Population from the 2020 Census: 272 people
      • Jump to TripAdvisor's Tourism page for Ross <2>
    • Mart
      (21 miles [33.8 km] to the south)
      • Note: The GPS coordinates that we are using for Mart have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mart
      • Mart is located in McLennan County
      • Population from the 2020 Census: 1,983 people
      • Jump to TripAdvisor's Tourism page for Mart <2>
    • Elm Mott
      (21 miles [33.8 km] to the southwest)
    • Northcrest
      (22 miles [35.4 km] to the southwest)
      • Note: The GPS coordinates that we are using for Northcrest have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Northcrest
      • Northcrest is located in McLennan County
    • Lacy - Lakeview
      (23 miles [37 km] to the southwest)
      • Note: The GPS coordinates that we are using for Lacy - Lakeview have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lacy - Lakeview
      • Lacy - Lakeview is located in McLennan County
      • Population from the 2020 Census: 6,803 people
      • Jump to TripAdvisor's Tourism page for Lacy - Lakeview <2>
    • Bellmead
      (24 miles [38.6 km] to the southwest)
      • Note: The GPS coordinates that we are using for Bellmead have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bellmead
      • Bellmead is located in McLennan County
      • Population from the 2020 Census: 10,835 people
      • Jump to TripAdvisor's Tourism page for Bellmead <2>
    • East Waco
      (26 miles [41.8 km] to the southwest)
      • Note: The GPS coordinates that we are using for East Waco have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for East Waco
      • East Waco is located in McLennan County
  • Navarro County
    • The following are listed by their distance from Hubbard, with the one closest to Hubbard listed first.
    • Dawson
      (5 miles [8 km] to the northeast)
      • Note: The GPS coordinates that we are using for Dawson have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dawson
      • Dawson is located in Navarro County
      • Population from the 2020 Census: 798 people
      • Jump to TripAdvisor's Tourism page for Dawson <2>
    • Spring Hill
      (8 miles [12.9 km] to the northeast)
      • Jump to our Gazetteer entry for Spring Hill
      • Spring Hill is located in Navarro County
    • Navarro Mills
      (10 miles [16.1 km] to the northeast)
      • Jump to our Gazetteer entry for Navarro Mills
      • Navarro Mills is located in Navarro County
    • Purdon
      (12 miles [19.3 km] to the northeast)
      • Note: The GPS coordinates that we are using for Purdon have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Purdon
      • Purdon is located in Navarro County
      • Jump to TripAdvisor's Tourism page for Purdon <2>
    • Silver City
      (12 miles [19.3 km] to the northeast)
      • Note: The GPS coordinates that we are using for Silver City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Silver City
      • Silver City is located in Navarro County
    • Dresden
      (14 miles [22.5 km] to the northeast)
      • Jump to our Gazetteer entry for Dresden
      • Dresden is located in Navarro County
    • Frost
      (16 miles [25.7 km] to the north)
    • Blooming Grove
      (17 miles [27.4 km] to the north)
      • Note: The GPS coordinates that we are using for Blooming Grove have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Blooming Grove
      • Blooming Grove is located in Navarro County
      • Population from the 2020 Census: 831 people
      • Jump to TripAdvisor's Tourism page for Blooming Grove <2>
    • Barry
      (19 miles [30.6 km] to the northeast)
    • Cryer Creek ‑ Historic
      (21 miles [33.8 km] to the northeast)
      • Jump to our Gazetteer entry for Cryer Creek
      • Cryer Creek is located in Navarro County
    • Oak Valley
      (21 miles [33.8 km] to the northeast)
      • Note: The GPS coordinates that we are using for Oak Valley have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Oak Valley
      • Oak Valley is located in Navarro County
      • Population from the 2020 Census: 427 people
    • Richland
      (22 miles [35.4 km] to the east)
      • Note: The GPS coordinates that we are using for Richland have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Richland
      • Richland is located in Navarro County
      • Population from the 2020 Census: 273 people
    • Retreat
      (23 miles [37 km] to the northeast)
      • Note: The GPS coordinates that we are using for Retreat have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Retreat
      • Retreat is located in Navarro County
      • Population from the 2020 Census: 384 people

For an expanded list of the communities that are closest to Hubbard, see our County-by-County Page for Hubbard.

Newspapers Published in Hubbard ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 127 newspapers that have been published in the area around Hubbard.

Although we're unaware of any newspapers that were published in the immediate area of Hubbard, there are papers which were published within 29 miles [46.7 km]<3>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Hubbard.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we first turn to the websites from Cyndi's List, FamilySearch and Genealogy Trails. These professional and volunteer websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Hubbard:

Cemeteries Near Hubbard ...

Below are cemeteries that are in the vicinity of Hubbard.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Hubbard covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Hubbard, with the one closest to Hubbard listed first.

  • Fairview Cemetery
    (Less than 2 miles to the southwest)
    • Note: The GPS coordinates that we are using for the Fairview Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Fairview Cemetery
  • Pin Oak Cemetery
    (Less than 2 miles to the southeast)
    • Note: The GPS coordinates that we are using for the Pin Oak Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Pin Oak Cemetery
  • Valley View Cemetery
    (Less than 2 miles to the southeast)
    • Note: The GPS coordinates that we are using for the Valley View Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Valley View Cemetery
  • McLain Cemetery
    (Less than 2 miles to the northeast)
    • Note: The GPS coordinates that we are using for the McLain Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the McLain Cemetery
  • Liberty Hill Cemetery
    (3 miles [4.8 km] to the northeast)
    • Note: The GPS coordinates that we are using for the Liberty Hill Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Liberty Hill Cemetery
  • Powell Cemetery
    (4 miles [6.4 km] to the south)
    • Note: The GPS coordinates that we are using for the Powell Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Powell Cemetery
  • Antioch Cemetery
    (4 miles [6.4 km] to the north)
  • Cottonwood Cemetery
    (4 miles [6.4 km] to the northwest)
    • Note: The GPS coordinates that we are using for the Cottonwood Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Cottonwood Cemetery
  • Dover Cemetery
    (5 miles [8 km] to the east)
    • Note: The GPS coordinates that we are using for the Dover Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Dover Cemetery
  • Lawrence Cemetery
    (6 miles [9.7 km] to the north)
    • Note: The GPS coordinates that we are using for the Lawrence Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Lawrence Cemetery
  • Penelope Cemetery
    (6 miles [9.7 km] to the west)
  • St. Joseph Cemetery
    (6 miles [9.7 km] to the west)
    • Note: The GPS coordinates that we are using for the St. Joseph Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the St. Joseph Cemetery
  • Continue List   (170 more) ...
    • Pelham Cemetery
      (7 miles [11.3 km] to the north)
      • Note: The GPS coordinates that we are using for the Pelham Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Pelham Cemetery
    • Czech National Cemetery
      (7 miles [11.3 km] to the west)
      • Note: The GPS coordinates that we are using for the Czech National Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Czech National Cemetery
    • George Newton Cemetery
      (7 miles [11.3 km] to the west)
      • Note: The GPS coordinates that we are using for the George Newton Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the George Newton Cemetery

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<5>

The Rand McNally Atlas shows that Hubbard had a population of 894 people in 1895 with a post office and railroad service. In 2020, Hubbard had a population of 1,418 people.

These communities are listed based on their distance from Hubbard, with the one closest to Hubbard listed first.

  • Dawson
    (5 miles [8 km] to the northeast)
    • Note: The GPS coordinates that we are using for Dawson have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Dawson
    • Dawson is located in Navarro County
    • Population from the 2020 Census: 798 people
    • Jump to TripAdvisor's Tourism page for Dawson <2>
  • Mount Calm
    (7 miles [11.3 km] to the southwest)
    • Note: The GPS coordinates that we are using for Mount Calm have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mount Calm
    • Mount Calm is located in Hill County
    • Population from the 2020 Census: 340 people
    • Jump to TripAdvisor's Tourism page for Mount Calm <2>
  • Spring Hill
    (8 miles [12.9 km] to the northeast)
    • Jump to our Gazetteer entry for Spring Hill
    • Spring Hill is located in Navarro County
  • Emmett
    (9 miles [14.5 km] to the north)
    • Note: The GPS coordinates that we are using for Emmett have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Emmett
    • Emmett is located in Navarro County
  • Irene
    (10 miles [16.1 km] to the northwest)
    • Note: The GPS coordinates that we are using for Irene have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Irene
    • Irene is located in Hill County
    • Jump to TripAdvisor's Tourism page for Irene <2>
  • Rodney
    (11 miles [17.7 km] to the east)
    • Note: The GPS coordinates that we are using for Rodney have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rodney
    • Rodney is located in Navarro County
  • Purdon
    (12 miles [19.3 km] to the northeast)
    • Note: The GPS coordinates that we are using for Purdon have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Purdon
    • Purdon is located in Navarro County
    • Jump to TripAdvisor's Tourism page for Purdon <2>
  • Prairie Hill
    (13 miles [20.9 km] to the south)
    • Note: The GPS coordinates that we are using for Prairie Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Prairie Hill
    • Prairie Hill is located in Limestone County
    • Jump to TripAdvisor's Tourism page for Prairie Hill <2>
  • Dresden
    (14 miles [22.5 km] to the northeast)
    • Jump to our Gazetteer entry for Dresden
    • Dresden is located in Navarro County
  • Bynum
    (14 miles [22.5 km] to the northwest)
    • Note: The GPS coordinates that we are using for Bynum have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bynum
    • Bynum is located in Hill County
    • Population from the 2020 Census: 208 people
    • Jump to TripAdvisor's Tourism page for Bynum <2>
  • Mertens
    (15 miles [24.1 km] to the north)
    • Note: The GPS coordinates that we are using for Mertens have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mertens
    • Mertens is located in Hill County
    • Population from the 2020 Census: 131 people
    • Jump to TripAdvisor's Tourism page for Mertens <2>
  • Pursley
    (15 miles [24.1 km] to the east)
    • Note: The GPS coordinates that we are using for Pursley have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Pursley
    • Pursley is located in Navarro County
  • Continue List   (16 more) ...
    • Axtell
      (16 miles [25.7 km] to the southwest)
    • Frost
      (16 miles [25.7 km] to the north)
    • Frosa
      (16 miles [25.7 km] to the south)
      • Jump to our Gazetteer entry for Frosa
      • Frosa is located in Limestone County

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Hubbard. See our List of 1890's Communities around Hubbard.

Unfortunately, we don't know of a website for Hubbard. If you can help, please contact us through our Feedback Page.

The official website for State of Texas: https://texas.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Hubbard) to Point B.Our distance measurements begin at a specific point in Hubbard. The point we use is located at these GPS coordinates - Latitude: 31.8470, Longitude: -96.8003       In this case, the coordinates for Hubbard have been provided by the Geographic Names Information System (GNIS).
<4>The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com.
<5>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Hubbard, please let us know so that we can improve our accuracy.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024