|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Dittlinger in the Atlas, the following communities of the 1890's would have been found near the current location of Dittlinger. The following communities are listed based on their distance, with the one closest to Dittlinger listed first.
- Corbyn
(3 miles [4.8 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Corbyn. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Corbyn
- Corbyn is located in Comal County
- Google driving directions:
- From your current location to Corbyn
- From Dittlinger to Corbyn
- New Braunfels
(3 miles [4.8 km] to the northeast)
- Marion
(7 miles [11.3 km] to the south)
- Note: The GPS coordinates that we are using for Marion have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Marion
- Marion is located in Guadalupe County
- Population from the 2020 Census: 1,281 people
- Jump to TripAdvisor's Tourism page for Marion <3>
- Clear Springs
(7 miles [11.3 km] to the east)
- Note: The GPS coordinates that we are using for Clear Springs have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clear Springs
- Clear Springs is located in Guadalupe County
- Cibolo
(8 miles [12.9 km] to the southwest)
- Bracken
(9 miles [14.5 km] to the southwest)
- Selma
(9 miles [14.5 km] to the southwest)
- Sattler
(11 miles [17.7 km] to the north)
- Geronimo
(12 miles [19.3 km] to the east)
- Hunter
(12 miles [19.3 km] to the northeast)
- Converse
(13 miles [20.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Converse have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Converse
- Converse is located in Bexar County
- Population from the 2020 Census: 28,814 people
- Jump to TripAdvisor's Tourism page for Converse <3>
- Smithson Valley
(13 miles [20.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Smithson Valley have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Smithson Valley
- Smithson Valley is located in Comal County
- Seguin
(14 miles [22.5 km] to the southeast)
- Zorn
(14 miles [22.5 km] to the east)
- New Berlin
(15 miles [24.1 km] to the south)
- Wetmore
(16 miles [25.7 km] to the southwest)
- Cranes Mill
(17 miles [27.4 km] to the north)
- Note: The GPS coordinates that we are using for Cranes Mill have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cranes Mill
- Cranes Mill is located in Comal County
- Saint Hedwig
(18 miles [29 km] to the south)
- Note: The GPS coordinates that we are using for Saint Hedwig have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Hedwig
- Saint Hedwig is located in Bexar County
- Population from the 2020 Census: 2,529 people
- Jump to TripAdvisor's Tourism page for Saint Hedwig <3>
- Olmos ‑ Historic
(18 miles [29 km] to the southeast)
- Kirby
(19 miles [30.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Kirby have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kirby
- Kirby is located in Bexar County
- Population from the 2020 Census: 8,719 people
- Jump to TripAdvisor's Tourism page for Kirby <3>
- San Marcos
(19 miles [30.6 km] to the northeast)
- Anhalt
(19 miles [30.6 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Anhalt. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Anhalt
- Anhalt is located in Comal County
- Google driving directions:
- From your current location to Anhalt
- From Dittlinger to Anhalt
- Spring Branch
(20 miles [32.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Spring Branch have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Spring Branch
- Spring Branch is located in Comal County
- Jump to TripAdvisor's Tourism page for Spring Branch <3>
- Kingsbury
(21 miles [33.8 km] to the east)
- Staples
(21 miles [33.8 km] to the east)
Off-the-Road Links ...
The official website for Comal County: www.co.comal.tx.us/ The official website for State of Texas: https://texas.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Dittlinger, please let us know so that we can improve our accuracy. |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|