Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Denman Crossroads in the Atlas, the following communities of the 1890's would have been found near the current location of Denman Crossroads. The following communities are listed based on their distance, with the one closest to Denman Crossroads listed first.
- Walton
(3 miles [4.8 km] to the southeast)
- Walton is located in Van Zandt County
- Jump to our Gazetteer entry for Walton
- Martins Mill
(5 miles [8 km] to the east)
- Martins Mill is located in Van Zandt County
- Jump to our Gazetteer entry for Martins Mill
- Jackson
(6 miles [9.7 km] to the north)
- Jackson is located in Van Zandt County
- Jump to our Gazetteer entry for Jackson
- Roddy
(8 miles [12.9 km] to the west)
- Roddy is located in Van Zandt County
- Jump to our Gazetteer entry for Roddy
- Canton
(10 miles [16.1 km] to the north)
- Murchison
(11 miles [17.7 km] to the southeast)
- Ben Wheeler
(11 miles [17.7 km] to the east)
- Colfax
(11 miles [17.7 km] to the northeast)
- Colfax is located in Van Zandt County
- Jump to our Gazetteer entry for Colfax
- Wise
(11 miles [17.7 km] to the northwest)
- Wise is located in Van Zandt County
- Jump to our Gazetteer entry for Wise
- Athens
(13 miles [20.9 km] to the south)
- Prairieville
(13 miles [20.9 km] to the northwest)
- Prairieville is located in Kaufman County
- Jump to our Gazetteer entry for Prairieville
- Myrtle Springs
(14 miles [22.5 km] to the north)
- Myrtle Springs is located in Van Zandt County
- Jump to our Gazetteer entry for Myrtle Springs
- Payne Springs
(15 miles [24.1 km] to the southwest)
- Payne Springs is located in Henderson County
- Jump to our Gazetteer entry for Payne Springs
- Population from the 2020 Census: 756 people
- Edom
(16 miles [25.7 km] to the east)
- Malakoff
(17 miles [27.4 km] to the southwest)
- Brownsboro
(17 miles [27.4 km] to the southeast)
- Pruitt
(18 miles [29 km] to the northeast)
- Pruitt is located in Van Zandt County
- Jump to our Gazetteer entry for Pruitt
- Pine Grove
(19 miles [30.6 km] to the south)
- Pine Grove is located in Henderson County
- Jump to our Gazetteer entry for Pine Grove
- New York
(20 miles [32.2 km] to the southeast)
- New York is located in Henderson County
- Jump to our Gazetteer entry for New York
- Edgewood
(20 miles [32.2 km] to the north)
- Kemp
(20 miles [32.2 km] to the west)
- Tolosa
(20 miles [32.2 km] to the west)
- Tolosa is located in Kaufman County
- Jump to our Gazetteer entry for Tolosa
- Trinidad
(21 miles [33.8 km] to the southwest)
- Grand Saline
(21 miles [33.8 km] to the northeast)
- Wills Point
(22 miles [35.4 km] to the north)
- Carroll
(22 miles [35.4 km] to the east)
- Carroll is located in Smith County
- Jump to our Gazetteer entry for Carroll
- Garden Valley
(22 miles [35.4 km] to the northeast)
- Garden Valley is located in Smith County
- Jump to our Gazetteer entry for Garden Valley
- Jamestown
(22 miles [35.4 km] to the northeast)
- Jamestown is located in Smith County
- Jump to our Gazetteer entry for Jamestown
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Denman Crossroads, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |