|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Steel Branch Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Steel Branch Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Steel Branch Cemetery. We've listed the following communities based on their distance, with the closest first.
- Caddo
(Less than 2 miles to the northwest)
- Jump to our Gazetteer entry for Caddo
- Caddo is located in Wilson County
- Pandora
(3 miles [4.8 km] to the southeast)
- Union
(3 miles [4.8 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Union. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Union
- Union is located in Wilson County
- Stockdale
(5 miles [8 km] to the southwest)
- Nockenut
(5 miles [8 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Nockenut. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Nockenut
- Nockenut is located in Wilson County
- Alum
(5 miles [8 km] to the west)
- Jump to our Gazetteer entry for Alum
- Alum is located in Wilson County
- Denhawken
(7 miles [11.3 km] to the south)
- Jump to our Gazetteer entry for Denhawken
- Denhawken is located in Wilson County
- Nixon
(7 miles [11.3 km] to the east)
- Dewville
(8 miles [12.9 km] to the northeast)
- Jump to our Gazetteer entry for Dewville
- Dewville is located in Gonzales County
- Sutherland Springs
(10 miles [16.1 km] to the west)
- Plummer Crossing ‑ Historic
(11 miles [17.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Plummer Crossing have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Plummer Crossing
- Plummer Crossing is located in Wilson County
- Gillett
(11 miles [17.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Gillett have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gillett
- Gillett is located in Karnes County
- Jump to TripAdvisor's Tourism page for Gillett <2>
- Kosciusko
(12 miles [19.3 km] to the south)
- Note: The GPS coordinates that we are using for Kosciusko have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kosciusko
- Kosciusko is located in Wilson County
- Jakes Colony
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Jakes Colony have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jakes Colony
- Jakes Colony is located in Guadalupe County
- Leesville
(12 miles [19.3 km] to the northeast)
- Sunnyside
(13 miles [20.9 km] to the southwest)
- Jump to our Gazetteer entry for Sunnyside
- Sunnyside is located in Wilson County
- Smiley
(14 miles [22.5 km] to the east)
- Olmos ‑ Historic
(14 miles [22.5 km] to the northwest)
- Jump to our Gazetteer entry for Olmos
- Olmos is located in Guadalupe County
- Grass Pond Colony ‑ Historic
(14 miles [22.5 km] to the west)
- Note: The GPS coordinates that we are using for Grass Pond Colony have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Grass Pond Colony
- Grass Pond Colony is located in Wilson County
- Pawelekville
(15 miles [24.1 km] to the south)
- Jump to our Gazetteer entry for Pawelekville
- Pawelekville is located in Karnes County
- Sweet Home
(15 miles [24.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Sweet Home have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sweet Home
- Sweet Home is located in Guadalupe County
- La Vernia
(15 miles [24.1 km] to the west)
- Dugger
(16 miles [25.7 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Dugger. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Dugger
- Dugger is located in Guadalupe County
- Ecleto
(17 miles [27.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Ecleto have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ecleto
- Ecleto is located in Karnes County
- Jump to TripAdvisor's Tourism page for Ecleto <2>
- Bebe
(17 miles [27.4 km] to the northeast)
Off-the-Road Links ...
The official website for State of Texas: https://texas.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Steel Branch Cemetery. The point we use is located at these GPS coordinates - Latitude: 29.2752, Longitude: -97.8836 In this case, the coordinates for the Steel Branch Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|