|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Pleasant Hill Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Pleasant Hill Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Pleasant Hill Cemetery. We've listed the following communities based on their distance, with the closest first.
- Nolanville
(Less than 2 miles to the southeast)
- Harker Heights
(2 miles [3.2 km] to the southwest)
- Note: The GPS coordinates that we are using for Harker Heights have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Harker Heights
- Harker Heights is located in Bell County
- Population from the 2020 Census: 33,071 people
- Jump to TripAdvisor's Tourism page for Harker Heights <2>
- Brookhaven
(6 miles [9.7 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Brookhaven. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Brookhaven
- Brookhaven is located in Bell County
- Walker Village
(6 miles [9.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Walker Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Walker Village
- Walker Village is located in Bell County
- Killeen
(6 miles [9.7 km] to the west)
- Note: The GPS coordinates that we are using for Killeen have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Killeen
- Killeen is located in Bell County
- Population from the 2020 Census: 153,991 people
- Jump to TripAdvisor's Tourism page for Killeen <2>
- McNair Village
(8 miles [12.9 km] to the west)
- Note: The GPS coordinates that we are using for McNair Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McNair Village
- McNair Village is located in Bell County
- Chaffee Village
(8 miles [12.9 km] to the west)
- Note: The GPS coordinates that we are using for Chaffee Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chaffee Village
- Chaffee Village is located in Bell County
- Belton
(9 miles [14.5 km] to the east)
- Mason Crossing ‑ Historic
(9 miles [14.5 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Mason Crossing. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Mason Crossing
- Mason Crossing is located in Coryell County
- Fort Hood
(9 miles [14.5 km] to the west)
- Morgan's Point Resort
(10 miles [16.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Morgan's Point Resort have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Morgan's Point Resort
- Morgan's Point Resort is located in Bell County
- Population from the 2020 Census: 4,785 people
- Jump to TripAdvisor's Tourism page for Morgan's Point Resort <2>
- Ding Dong
(11 miles [17.7 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Ding Dong. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Ding Dong
- Ding Dong is located in Bell County
- Salado
(11 miles [17.7 km] to the southeast)
- Comanche Village I
(11 miles [17.7 km] to the west)
- Note: The GPS coordinates that we are using for Comanche Village I have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Comanche Village I
- Comanche Village I is located in Coryell County
- Comanche Village II
(11 miles [17.7 km] to the west)
- Note: The GPS coordinates that we are using for Comanche Village II have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Comanche Village II
- Comanche Village II is located in Coryell County
- Moffat
(12 miles [19.3 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Moffat. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Moffat
- Moffat is located in Bell County
- Comanche Village III
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for Comanche Village III have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Comanche Village III
- Comanche Village III is located in Coryell County
- Montague Village
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for Montague Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Montague Village
- Montague Village is located in Coryell County
- Saint Elijah Village
(13 miles [20.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Saint Elijah Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Elijah Village
- Saint Elijah Village is located in Coryell County
- Maxdale ‑ Historic
(14 miles [22.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Maxdale have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Maxdale
- Maxdale is located in Bell County
- The Grove
(14 miles [22.5 km] to the northeast)
- Jump to our Gazetteer entry for The Grove
- The Grove is located in Coryell County
- Flat
(15 miles [24.1 km] to the north)
- Note: The GPS coordinates that we are using for Flat have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Flat
- Flat is located in Coryell County
- Jump to TripAdvisor's Tourism page for Flat <2>
- Temple
(16 miles [25.7 km] to the east)
- Little River
(17 miles [27.4 km] to the southeast)
- Little River-Academy
(17 miles [27.4 km] to the southeast)
- Jump to our Gazetteer entry for Little River-Academy
- Little River-Academy is located in Bell County
- Population from the 2020 Census: 2,048 people
- Pendleton
(17 miles [27.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Pendleton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pendleton
- Pendleton is located in Bell County
- Jump to TripAdvisor's Tourism page for Pendleton <2>
- Leon Junction
(17 miles [27.4 km] to the north)
- Copperas Cove
(17 miles [27.4 km] to the west)
- Note: The GPS coordinates that we are using for Copperas Cove have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Copperas Cove
- Copperas Cove is located in Bell County
- Population from the 2020 Census: 33,498 people
- Jump to TripAdvisor's Tourism page for Copperas Cove <2>
Off-the-Road Links ...
The official website for Bell County: www.bellcountytx.com/ The official website for State of Texas: https://texas.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Pleasant Hill Cemetery. The point we use is located at these GPS coordinates - Latitude: 31.0888, Longitude: -97.6261 In this case, the coordinates for the Pleasant Hill Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|