|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Patton Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Patton Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Patton Cemetery. We've listed the following communities based on their distance, with the closest first.
- Jacksboro
(5 miles [8 km] to the south)
- Jermyn
(11 miles [17.7 km] to the west)
- Postoak
(11 miles [17.7 km] to the north)
- Bob Town
(12 miles [19.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Bob Town have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bob Town
- Bob Town is located in Jack County
- Shannon
(12 miles [19.3 km] to the north)
- Bryson
(14 miles [22.5 km] to the southwest)
- Wizard Wells
(14 miles [22.5 km] to the southeast)
- Antelope
(14 miles [22.5 km] to the northwest)
- Newport
(15 miles [24.1 km] to the northeast)
- Loving
(18 miles [29 km] to the west)
- Perrin
(19 miles [30.6 km] to the south)
- Joy
(19 miles [30.6 km] to the north)
- Runaway Bay
(20 miles [32.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Runaway Bay have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Runaway Bay
- Runaway Bay is located in Wise County
- Population from the 2020 Census: 1,627 people
- Jump to TripAdvisor's Tourism page for Runaway Bay <2>
- Westbrook
(21 miles [33.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Westbrook have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Westbrook
- Westbrook is located in Jack County
- Lake Bridgeport
(21 miles [33.8 km] to the east)
- Note: The GPS coordinates that we are using for Lake Bridgeport have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lake Bridgeport
- Lake Bridgeport is located in Wise County
- Population from the 2020 Census: 405 people
- Farmer
(21 miles [33.8 km] to the west)
- Gibtown
(22 miles [35.4 km] to the southeast)
- Chico
(22 miles [35.4 km] to the east)
- Park Springs
(22 miles [35.4 km] to the east)
- Graford
(24 miles [38.6 km] to the south)
- Note: The GPS coordinates that we are using for Graford have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Graford
- Graford is located in Palo Pinto County
- Population from the 2020 Census: 631 people
- Jump to TripAdvisor's Tourism page for Graford <2>
- Boonsville
(24 miles [38.6 km] to the southeast)
- Windthorst
(24 miles [38.6 km] to the northwest)
- Whitt
(25 miles [40.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Whitt have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Whitt
- Whitt is located in Parker County
- Jump to TripAdvisor's Tourism page for Whitt <2>
- Bridgeport
(25 miles [40.2 km] to the east)
- Bellevue
(25 miles [40.2 km] to the northeast)
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Patton Cemetery. The point we use is located at these GPS coordinates - Latitude: 33.2951, Longitude: -98.1902 |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|