|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Marlow Community Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Marlow Community Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Marlow Community Cemetery. We've listed the following communities based on their distance, with the closest first.
- Marlow
(Less than 2 miles to the south)
- Jump to our Gazetteer entry for Marlow
- Marlow is located in Milam County
- Cameron
(3 miles [4.8 km] to the west)
- Silver City
(4 miles [6.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Silver City have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Silver City
- Silver City is located in Milam County
- Maysfield
(5 miles [8 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Maysfield. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Maysfield
- Maysfield is located in Milam County
- Jump to TripAdvisor's Tourism page for Maysfield <2>
- Minerva
(7 miles [11.3 km] to the southwest)
- Jump to our Gazetteer entry for Minerva
- Minerva is located in Milam County
- Jones Prairie
(9 miles [14.5 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Jones Prairie. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Jones Prairie
- Jones Prairie is located in Milam County
- Milano
(10 miles [16.1 km] to the south)
- Note: The GPS coordinates that we are using for Milano have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Milano
- Milano is located in Milam County
- Population from the 2020 Census: 420 people
- Jump to TripAdvisor's Tourism page for Milano <2>
- Crossroads
(11 miles [17.7 km] to the northeast)
- Jump to our Gazetteer entry for Crossroads
- Crossroads is located in Milam County
- Tracy
(12 miles [19.3 km] to the southwest)
- Jump to our Gazetteer entry for Tracy
- Tracy is located in Milam County
- Burlington
(12 miles [19.3 km] to the north)
- Gause
(12 miles [19.3 km] to the east)
- Buckholts
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for Buckholts have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Buckholts
- Buckholts is located in Milam County
- Population from the 2020 Census: 518 people
- Jump to TripAdvisor's Tourism page for Buckholts <2>
- Port Sullivan ‑ Historic
(13 miles [20.9 km] to the east)
- Note: The GPS coordinates that we are using for Port Sullivan have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Port Sullivan
- Port Sullivan is located in Milam County
- Rockdale
(14 miles [22.5 km] to the south)
- Edgeworth
(14 miles [22.5 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Edgeworth. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Edgeworth
- Edgeworth is located in Bell County
- Rosebud
(15 miles [24.1 km] to the north)
- Baileyville
(15 miles [24.1 km] to the north)
- Jump to our Gazetteer entry for Baileyville
- Baileyville is located in Milam County
- Meeks
(15 miles [24.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Meeks have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Meeks
- Meeks is located in Bell County
- Zipperlandville ‑ Historic
(17 miles [27.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Zipperlandville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Zipperlandville
- Zipperlandville is located in Falls County
- Zipperlandville has also been known as:
- Zipperlen
- Zipperlenville
- Calvert
(17 miles [27.4 km] to the northeast)
- Wilderville
(17 miles [27.4 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Wilderville. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Wilderville
- Wilderville is located in Falls County
- Cyclone
(18 miles [29 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Cyclone. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Cyclone
- Cyclone is located in Bell County
- Rogers
(18 miles [29 km] to the west)
- Chriesman
(19 miles [30.6 km] to the southeast)
- Hearne
(19 miles [30.6 km] to the east)
- Note: The GPS coordinates that we are using for Hearne have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hearne
- Hearne is located in Robertson County
- Population from the 2020 Census: 4,340 people
- Jump to TripAdvisor's Tourism page for Hearne <2>
- Val Verde
(19 miles [30.6 km] to the west)
- Jump to our Gazetteer entry for Val Verde
- Val Verde is located in Milam County
Off-the-Road Links ...
The official website for State of Texas: https://texas.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Marlow Community Cemetery. The point we use is located at these GPS coordinates - Latitude: 30.8499, Longitude: -96.9214 In this case, the coordinates for the Marlow Community Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|