|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Hubbard Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Hubbard Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Hubbard Cemetery. We've listed the following communities based on their distance, with the closest first.
- Flat
(3 miles [4.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Flat have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Flat
- Flat is located in Coryell County
- Jump to TripAdvisor's Tourism page for Flat <3>
- Mason Crossing ‑ Historic
(5 miles [8 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Mason Crossing. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Mason Crossing
- Mason Crossing is located in Coryell County
- Mound
(5 miles [8 km] to the north)
- Note: The GPS coordinates that we are using for Mound have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mound
- Mound is located in Coryell County
- Jump to TripAdvisor's Tourism page for Mound <3>
- Brookhaven
(6 miles [9.7 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Brookhaven. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Brookhaven
- Brookhaven is located in Bell County
- Leon Junction
(6 miles [9.7 km] to the northeast)
- Saint Elijah Village
(7 miles [11.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Saint Elijah Village have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Elijah Village
- Saint Elijah Village is located in Coryell County
- The Grove
(8 miles [12.9 km] to the east)
- Jump to our Gazetteer entry for The Grove
- The Grove is located in Coryell County
- Walker Village
(9 miles [14.5 km] to the south)
- Note: The GPS coordinates that we are using for Walker Village have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Walker Village
- Walker Village is located in Bell County
- Fort Gates
(9 miles [14.5 km] to the north)
- Note: The GPS coordinates that we are using for Fort Gates have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fort Gates
- Fort Gates is located in Coryell County
- McNair Village
(10 miles [16.1 km] to the southwest)
- Note: The GPS coordinates that we are using for McNair Village have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McNair Village
- McNair Village is located in Bell County
- Fort Hood
(11 miles [17.7 km] to the southwest)
- Chaffee Village
(11 miles [17.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Chaffee Village have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chaffee Village
- Chaffee Village is located in Bell County
- Lime City
(11 miles [17.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Lime City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lime City
- Lime City is located in Coryell County
- South Mountain
(11 miles [17.7 km] to the north)
- Note: The GPS coordinates that we are using for South Mountain have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Mountain
- South Mountain is located in Coryell County
- Population from the 2020 Census: 367 people
- Comanche Village III
(12 miles [19.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Comanche Village III have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Comanche Village III
- Comanche Village III is located in Coryell County
- Comanche Village I
(12 miles [19.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Comanche Village I have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Comanche Village I
- Comanche Village I is located in Coryell County
- Comanche Village II
(12 miles [19.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Comanche Village II have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Comanche Village II
- Comanche Village II is located in Coryell County
- Gatesville
(12 miles [19.3 km] to the northwest)
- Moffat
(12 miles [19.3 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Moffat. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Moffat
- Moffat is located in Bell County
- Killeen
(13 miles [20.9 km] to the south)
- Note: The GPS coordinates that we are using for Killeen have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Killeen
- Killeen is located in Bell County
- Population from the 2020 Census: 153,991 people
- Jump to TripAdvisor's Tourism page for Killeen <3>
- Nolanville
(13 miles [20.9 km] to the south)
- Oglesby
(13 miles [20.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Oglesby have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oglesby
- Oglesby is located in Coryell County
- Population from the 2020 Census: 464 people
- Jump to TripAdvisor's Tourism page for Oglesby <3>
- Montague Village
(14 miles [22.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Montague Village have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Montague Village
- Montague Village is located in Coryell County
- Harker Heights
(14 miles [22.5 km] to the south)
- Note: The GPS coordinates that we are using for Harker Heights have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Harker Heights
- Harker Heights is located in Bell County
- Population from the 2020 Census: 33,071 people
- Jump to TripAdvisor's Tourism page for Harker Heights <3>
- Morgan's Point Resort
(14 miles [22.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Morgan's Point Resort have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Morgan's Point Resort
- Morgan's Point Resort is located in Bell County
- Population from the 2020 Census: 4,785 people
- Jump to TripAdvisor's Tourism page for Morgan's Point Resort <3>
Off-the-Road Links ...
The official website for State of Texas: https://texas.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Hubbard Cemetery. The point we use is located at these GPS coordinates - Latitude: 31.2682, Longitude: -97.6650 In this case, the coordinates for the Hubbard Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|