Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Fatina Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Fatina Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Fatina Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Abbott
(Less than 2 miles to the southeast)- Jump to our Gazetteer entry for Abbott
- Abbott is located in Hill County
- Population from the 2020 Census: 371 people
- Jump to TripAdvisor's Tourism page for Abbott <2>
- Chatt
(2 miles [3.2 km] to the north)- Jump to our Gazetteer entry for Chatt
- Chatt is located in Hill County
- Bynum
(6 miles [9.7 km] to the northeast)- Note: The GPS coordinates that we are using for Bynum have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bynum
- Bynum is located in Hill County
- Population from the 2020 Census: 208 people
- Jump to TripAdvisor's Tourism page for Bynum <2>
- West
(7 miles [11.3 km] to the south)- Note: The GPS coordinates that we are using for West have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West
- West is located in McLennan County
- Population from the 2020 Census: 2,969 people
- Jump to TripAdvisor's Tourism page for West <2>
- Hillsboro
(7 miles [11.3 km] to the north)- Jump to our Gazetteer entry for Hillsboro
- Hillsboro is located in Hill County
- Population from the 2020 Census: 8,516 people
- Jump to TripAdvisor's Tourism page for Hillsboro <2>
- Aquilla
(8 miles [12.9 km] to the southwest)- Jump to our Gazetteer entry for Aquilla
- Aquilla is located in Hill County
- Population from the 2020 Census: 114 people
- Jump to TripAdvisor's Tourism page for Aquilla <2>
- Peoria
(9 miles [14.5 km] to the northwest)- Jump to our Gazetteer entry for Peoria
- Peoria is located in Hill County
- Tours
(10 miles [16.1 km] to the south)- Jump to our Gazetteer entry for Tours
- Tours is located in McLennan County
- Penelope
(10 miles [16.1 km] to the east)- Jump to our Gazetteer entry for Penelope
- Penelope is located in Hill County
- Population from the 2020 Census: 207 people
- Jump to TripAdvisor's Tourism page for Penelope <2>
- Tyson
(11 miles [17.7 km] to the southwest) - Malone
(11 miles [17.7 km] to the east)- Note: The GPS coordinates that we are using for Malone have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Malone
- Malone is located in Hill County
- Population from the 2020 Census: 285 people
- Jump to TripAdvisor's Tourism page for Malone <2>
- Lovelace
(12 miles [19.3 km] to the north)- Jump to our Gazetteer entry for Lovelace
- Lovelace is located in Hill County
- Ross
(12 miles [19.3 km] to the south)- Note: The GPS coordinates that we are using for Ross have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ross
- Ross is located in McLennan County
- Population from the 2020 Census: 272 people
- Jump to TripAdvisor's Tourism page for Ross <2>
- Leroy
(12 miles [19.3 km] to the south)- Note: The GPS coordinates that we are using for Leroy have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Leroy
- Leroy is located in McLennan County
- Population from the 2020 Census: 346 people
- Jump to TripAdvisor's Tourism page for Leroy <2>
- Brandon
(12 miles [19.3 km] to the northeast)- Note: The GPS coordinates that we are using for Brandon have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brandon
- Brandon is located in Hill County
- Jump to TripAdvisor's Tourism page for Brandon <2>
- Carl's Corner
(12 miles [19.3 km] to the north)- Note: The GPS coordinates that we are using for Carl's Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Carl's Corner
- Carl's Corner is located in Hill County
- Population from the 2020 Census: 199 people
- Whitney
(13 miles [20.9 km] to the west)- Note: The GPS coordinates that we are using for Whitney have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Whitney
- Whitney is located in Hill County
- Population from the 2020 Census: 2,145 people
- Jump to TripAdvisor's Tourism page for Whitney <2>
- Irene
(14 miles [22.5 km] to the northeast)- Note: The GPS coordinates that we are using for Irene have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Irene
- Irene is located in Hill County
- Jump to TripAdvisor's Tourism page for Irene <2>
- Mertens
(15 miles [24.1 km] to the northeast)- Note: The GPS coordinates that we are using for Mertens have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mertens
- Mertens is located in Hill County
- Population from the 2020 Census: 131 people
- Jump to TripAdvisor's Tourism page for Mertens <2>
- Gholson
(16 miles [25.7 km] to the southwest) - Elm Mott
(16 miles [25.7 km] to the south)- Jump to our Gazetteer entry for Elm Mott
- Elm Mott is located in McLennan County
- Jump to TripAdvisor's Tourism page for Elm Mott <2>
- Mount Calm
(16 miles [25.7 km] to the southeast)- Note: The GPS coordinates that we are using for Mount Calm have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Calm
- Mount Calm is located in Hill County
- Population from the 2020 Census: 340 people
- Jump to TripAdvisor's Tourism page for Mount Calm <2>
- Milford
(16 miles [25.7 km] to the northeast)- Note: The GPS coordinates that we are using for Milford have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Milford
- Milford is located in Ellis County
- Population from the 2020 Census: 756 people
- Jump to TripAdvisor's Tourism page for Milford <2>
- Laguna Park
(17 miles [27.4 km] to the west)- Jump to our Gazetteer entry for Laguna Park
- Laguna Park is located in Bosque County
- Jump to TripAdvisor's Tourism page for Laguna Park <2>
- Itasca
(17 miles [27.4 km] to the north)- Jump to our Gazetteer entry for Itasca
- Itasca is located in Hill County
- Population from the 2020 Census: 1,783 people
- Jump to TripAdvisor's Tourism page for Itasca <2>
- Greenock
(17 miles [27.4 km] to the southwest) - Hubbard
(17 miles [27.4 km] to the east)- Note: The GPS coordinates that we are using for Hubbard have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hubbard
- Hubbard is located in Hill County
- Population from the 2020 Census: 1,418 people
- Jump to TripAdvisor's Tourism page for Hubbard <2>
Off-the-Road Links ...
The official website for State of Texas: https://texas.gov/
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Fatina Cemetery. The point we use is located at these GPS coordinates - Latitude: 31.9088, Longitude: -97.0903 In this case, the coordinates for the Fatina Cemetery have been provided by the Geographic Names Information System (GNIS). |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |