|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Cedar Mills Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Cedar Mills Cemetery. For information of that nature, we recommend you visit Find-A-Grave's entry for the Cedar Mills Cemetery (FG ID #1081368). <1>
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<2> of the Cedar Mills Cemetery. We've listed the following communities based on their distance, with the closest first.
- Cedar Mills
(Less than 2 miles to the southwest)
- Sherwood Shores
(Less than 2 miles to the north)
- Gordonville
(3 miles [4.8 km] to the southwest)
- Locust
(3 miles [4.8 km] to the southeast)
- Sandusky
(6 miles [9.7 km] to the southwest)
- Basin Springs
(7 miles [11.3 km] to the south)
- Shay
(7 miles [11.3 km] to the north)
- Dexter
(8 miles [12.9 km] to the west)
- Dixie
(9 miles [14.5 km] to the southwest)
- Pottsboro
(9 miles [14.5 km] to the southeast)
- Sadler
(10 miles [16.1 km] to the south)
- Gage
(11 miles [17.7 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Gage. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Gage
- Gage is located in Grayson County
- Google driving directions:
- From your current location to Gage
- From the Cedar Mills Cemetery to Gage
- Lebanon
(11 miles [17.7 km] to the northwest)
- Preston
(11 miles [17.7 km] to the east)
- Whitesboro
(12 miles [19.3 km] to the southwest)
- McBride
(12 miles [19.3 km] to the northeast)
- Note: The GPS coordinates that we are using for McBride have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McBride
- McBride is located in Marshall County (OK)
- Coesfield
(12 miles [19.3 km] to the west)
- New Woodville
(13 miles [20.9 km] to the northeast)
- Kingston
(13 miles [20.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Kingston have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kingston
- Kingston is located in Marshall County (OK)
- Population from the 2020 Census: 1,689 people
- Jump to TripAdvisor's Tourism page for Kingston <3>
- Callisburg
(14 miles [22.5 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Callisburg. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Callisburg
- Callisburg is located in Cooke County
- Population from the 2020 Census: 367 people
- Google driving directions:
- From your current location to Callisburg
- From the Cedar Mills Cemetery to Callisburg
- Southmayd
(14 miles [22.5 km] to the south)
- Frontier Village
(14 miles [22.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Frontier Village have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Frontier Village
- Frontier Village is located in Grayson County
- Cartwright
(14 miles [22.5 km] to the east)
- Knollwood
(15 miles [24.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Knollwood have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Knollwood
- Knollwood is located in Grayson County
- Population from the 2020 Census: 503 people
- Custer City ‑ Historic
(16 miles [25.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Custer City have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Custer City
- Custer City is located in Cooke County
- Twin City
(16 miles [25.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Twin City have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Twin City
- Twin City is located in Grayson County
- Denison
(16 miles [25.7 km] to the east)
- Red River City
(16 miles [25.7 km] to the east)
- Note: The GPS coordinates that we are using for Red River City have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Red River City
- Red River City is located in Grayson County
Off-the-Road Links ...
The official website for Grayson County: www.co.grayson.tx.us/ The official website for State of Texas: https://texas.gov/
Footnotes ...
<1> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<2> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Cedar Mills Cemetery. The point we use is located at these GPS coordinates - Latitude: 33.8316, Longitude: -96.8177 |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<5> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|