|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Calvert Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Calvert Cemetery. For information of that nature, we recommend you visit Find-A-Grave's entry for the Calvert Cemetery (FG ID #191821). <1>
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<2> of the Calvert Cemetery. We've listed the following communities based on their distance, with the closest first.
- Calvert
(Less than 2 miles to the southwest)
- Elliot
(6 miles [9.7 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Elliot. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Elliot
- Elliot is located in Robertson County
- Google driving directions:
- From your current location to Elliot
- From the Calvert Cemetery to Elliot
- Port Sullivan ‑ Historic
(7 miles [11.3 km] to the south)
- Note: The GPS coordinates that we are using for Port Sullivan have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Port Sullivan
- Port Sullivan is located in Milam County
- Crossroads
(7 miles [11.3 km] to the west)
- Hammond
(8 miles [12.9 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Hammond. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Hammond
- Hammond is located in Robertson County
- Google driving directions:
- From your current location to Hammond
- From the Calvert Cemetery to Hammond
- Hearne
(8 miles [12.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Hearne have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hearne
- Hearne is located in Robertson County
- Population from the 2020 Census: 4,340 people
- Jump to TripAdvisor's Tourism page for Hearne <3>
- Jones Prairie
(9 miles [14.5 km] to the west)
- Owensville
(10 miles [16.1 km] to the northeast)
- Baileyville
(10 miles [16.1 km] to the northwest)
- Franklin
(11 miles [17.7 km] to the east)
- Note: The GPS coordinates that we are using for Franklin have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Franklin
- Franklin is located in Robertson County
- Population from the 2020 Census: 1,643 people
- Jump to TripAdvisor's Tourism page for Franklin <3>
- Maysfield
(12 miles [19.3 km] to the southwest)
- Bremond
(12 miles [19.3 km] to the north)
- Gause
(13 miles [20.9 km] to the south)
- New Baden
(14 miles [22.5 km] to the east)
- Wilderville
(15 miles [24.1 km] to the northwest)
- Highbank
(16 miles [25.7 km] to the northwest)
- Silver City
(17 miles [27.4 km] to the west)
- Note: The GPS coordinates that we are using for Silver City have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Silver City
- Silver City is located in Milam County
- Marlow
(17 miles [27.4 km] to the southwest)
- Reagan
(17 miles [27.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Reagan have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Reagan
- Reagan is located in Falls County
- Jump to TripAdvisor's Tourism page for Reagan <3>
- Wheelock
(17 miles [27.4 km] to the east)
- Mumford
(18 miles [29 km] to the south)
- Note: The GPS coordinates that we are using for Mumford have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mumford
- Mumford is located in Robertson County
- Jump to TripAdvisor's Tourism page for Mumford <3>
- Rosebud
(19 miles [30.6 km] to the west)
- Burlington
(19 miles [30.6 km] to the west)
- Cameron
(20 miles [32.2 km] to the southwest)
- Rye ‑ Historic
(20 miles [32.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Rye have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rye
- Rye is located in Brazos County
- Benchley
(20 miles [32.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Benchley have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Benchley
- Benchley is located in Robertson County
Off-the-Road Links ...
The official website for State of Texas: https://texas.gov/
Footnotes ...
<1> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<2> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Calvert Cemetery. The point we use is located at these GPS coordinates - Latitude: 30.9817, Longitude: -96.6689 |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<5> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|