|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Anderson Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Anderson Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Anderson Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Owensville
(5 miles [8 km] to the east)
- Jump to our Gazetteer entry for Owensville
- Owensville is located in Robertson County
- Bremond
(5 miles [8 km] to the northwest)
- Calvert
(9 miles [14.5 km] to the south)
- Franklin
(9 miles [14.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Franklin have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Franklin
- Franklin is located in Robertson County
- Population from the 2020 Census: 1,643 people
- Jump to TripAdvisor's Tourism page for Franklin <2>
- Elliot
(10 miles [16.1 km] to the south)
- Note: The GPS coordinates that we are using for Elliot have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Elliot
- Elliot is located in Robertson County
- New Baden
(11 miles [17.7 km] to the east)
- Reagan
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Reagan have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Reagan
- Reagan is located in Falls County
- Jump to TripAdvisor's Tourism page for Reagan <2>
- Baileyville
(13 miles [20.9 km] to the west)
- Jump to our Gazetteer entry for Baileyville
- Baileyville is located in Milam County
- Highbank
(13 miles [20.9 km] to the west)
- Jump to our Gazetteer entry for Highbank
- Highbank is located in Falls County
- Crossroads
(14 miles [22.5 km] to the southwest)
- Jump to our Gazetteer entry for Crossroads
- Crossroads is located in Milam County
- Kosse
(14 miles [22.5 km] to the north)
- Port Sullivan ‑ Historic
(15 miles [24.1 km] to the south)
- Note: The GPS coordinates that we are using for Port Sullivan have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Port Sullivan
- Port Sullivan is located in Milam County
- Hearne
(15 miles [24.1 km] to the south)
- Note: The GPS coordinates that we are using for Hearne have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hearne
- Hearne is located in Robertson County
- Population from the 2020 Census: 4,340 people
- Jump to TripAdvisor's Tourism page for Hearne <2>
- Wilderville
(15 miles [24.1 km] to the west)
- Note: The GPS coordinates that we are using for Wilderville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wilderville
- Wilderville is located in Falls County
- Jones Prairie
(16 miles [25.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Jones Prairie have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jones Prairie
- Jones Prairie is located in Milam County
- Stranger
(16 miles [25.7 km] to the northwest)
- Jump to our Gazetteer entry for Stranger
- Stranger is located in Falls County
- Ridge
(17 miles [27.4 km] to the east)
- Jump to our Gazetteer entry for Ridge
- Ridge is located in Robertson County
- Maysfield
(19 miles [30.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Maysfield have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Maysfield
- Maysfield is located in Milam County
- Jump to TripAdvisor's Tourism page for Maysfield <2>
- Wheelock
(19 miles [30.6 km] to the southeast)
- Seale
(20 miles [32.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Seale have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Seale
- Seale is located in Robertson County
- Thornton
(21 miles [33.8 km] to the north)
- Marlin
(21 miles [33.8 km] to the northwest)
- Rosebud
(21 miles [33.8 km] to the west)
- Gause
(22 miles [35.4 km] to the south)
- Note: The GPS coordinates that we are using for Gause have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gause
- Gause is located in Milam County
- Jump to TripAdvisor's Tourism page for Gause <2>
- Burlington
(23 miles [37 km] to the west)
- Silver City
(23 miles [37 km] to the southwest)
- Note: The GPS coordinates that we are using for Silver City have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Silver City
- Silver City is located in Milam County
- Edge
(23 miles [37 km] to the southeast)
- Jump to our Gazetteer entry for Edge
- Edge is located in Brazos County
- Marquez
(23 miles [37 km] to the northeast)
Off-the-Road Links ...
The official website for State of Texas: https://texas.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Anderson Cemetery. The point we use is located at these GPS coordinates - Latitude: 31.1013, Longitude: -96.6147 In this case, the coordinates for the Anderson Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|