RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Texas >> Robertson County >> Barton >> Nearby Communities - 1890sIndex...










Learn About
The Commemorative
Quarter for
Texas

The Commemorative Quarter for Texas





Nearby Communities in the 1890s


We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.

If it applies, we indicate whether a community no longer exists and is now historic.<1>

While we didn't find Barton in the Atlas, the following communities of the 1890's would have been found near the current location of Barton. The following communities are listed based on their distance, with the one closest to Barton listed first.

  • Branchville
    (3 miles [4.8 km] to the southwest)
    • Note: The GPS coordinates that we are using for Branchville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Branchville
    • Branchville is located in Milam County
  • Calvert
    (4 miles [6.4 km] to the northeast)
  • Hearne
    (7 miles [11.3 km] to the southeast)
    • Note: The GPS coordinates that we are using for Hearne have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hearne
    • Hearne is located in Robertson County
    • Population from the 2020 Census: 4,340 people
    • Jump to TripAdvisor's Tourism page for Hearne <3>
  • Jones Prairie
    (7 miles [11.3 km] to the west)
    • Note: The GPS coordinates that we are using for Jones Prairie have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Jones Prairie
    • Jones Prairie is located in Milam County
  • Maysfield
    (8 miles [12.9 km] to the west)
    • Note: The GPS coordinates that we are using for Maysfield have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Maysfield
    • Maysfield is located in Milam County
    • Jump to TripAdvisor's Tourism page for Maysfield <3>
  • Elliot
    (8 miles [12.9 km] to the east)
    • Note: The GPS coordinates that we are using for Elliot have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Elliot
    • Elliot is located in Robertson County
  • Gause
    (9 miles [14.5 km] to the south)
    • Note: The GPS coordinates that we are using for Gause have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Gause
    • Gause is located in Milam County
    • Jump to TripAdvisor's Tourism page for Gause <3>
  • Hanover
    (10 miles [16.1 km] to the southwest)
    • Note: The GPS coordinates that we are using for Hanover have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hanover
    • Hanover is located in Milam County
  • Baileyville
    (11 miles [17.7 km] to the northwest)
    • Jump to our Gazetteer entry for Baileyville
    • Baileyville is located in Milam County
  • Hammond
    (12 miles [19.3 km] to the north)
    • Note: The GPS coordinates that we are using for Hammond have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hammond
    • Hammond is located in Robertson County
  • Sutton
    (12 miles [19.3 km] to the southeast)
    • Note: The GPS coordinates that we are using for Sutton have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sutton
    • Sutton is located in Robertson County
  • Clarkson
    (13 miles [20.9 km] to the west)
    • Note: The GPS coordinates that we are using for Clarkson have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Clarkson
    • Clarkson is located in Milam County
  • Nesbitt
    (14 miles [22.5 km] to the northeast)
    • Note: The GPS coordinates that we are using for Nesbitt have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Nesbitt
    • Nesbitt is located in Robertson County
  • Mumford
    (15 miles [24.1 km] to the southeast)
    • Note: The GPS coordinates that we are using for Mumford have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mumford
    • Mumford is located in Robertson County
    • Jump to TripAdvisor's Tourism page for Mumford <3>
  • Franklin
    (15 miles [24.1 km] to the northeast)
    • Note: The GPS coordinates that we are using for Franklin have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Franklin
    • Franklin is located in Robertson County
    • Population from the 2020 Census: 1,643 people
    • Jump to TripAdvisor's Tourism page for Franklin <3>
  • Cameron
    (16 miles [25.7 km] to the west)
  • Wilderville
    (16 miles [25.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Wilderville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Wilderville
    • Wilderville is located in Falls County
  • Ben Arnold
    (16 miles [25.7 km] to the west)
    • Note: The GPS coordinates that we are using for Ben Arnold have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ben Arnold
    • Ben Arnold is located in Milam County
  • Milano
    (17 miles [27.4 km] to the southwest)
    • Note: The GPS coordinates that we are using for Milano have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Milano
    • Milano is located in Milam County
    • Population from the 2020 Census: 420 people
    • Jump to TripAdvisor's Tourism page for Milano <3>
  • Bremond
    (17 miles [27.4 km] to the north)
  • New Baden
    (18 miles [29 km] to the northeast)
  • Rosebud
    (18 miles [29 km] to the northwest)
  • Burlington
    (18 miles [29 km] to the west)
  • Minerva
    (19 miles [30.6 km] to the southwest)
    • Jump to our Gazetteer entry for Minerva
    • Minerva is located in Milam County
  • Benchley
    (19 miles [30.6 km] to the southeast)
    • Note: The GPS coordinates that we are using for Benchley have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Benchley
    • Benchley is located in Robertson County
  • Wheelock
    (19 miles [30.6 km] to the east)

The official website for State of Texas: https://texas.gov/

Footnotes ...

<1>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Barton, please let us know so that we can improve our accuracy.
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024