|  | 
Nearby Communities in the 1890sWe largely built the following list with information that came from an Atlas published by Rand McNally in 1895.  The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available.  Over time, we will continue to add communities that we find during our research. If it applies, we indicate whether a community no longer exists and is now historic.<1> While we didn't find Wyatt Village in the Atlas, the following communities of the 1890's would have been found near the current location of Wyatt Village.  The following communities are listed based on their distance, with the one closest to Wyatt Village listed first. 
Bean Station(Less than 2 miles to the north)
Noeton ‑ Historic(3 miles [4.8 km] to the southwest)
 
Note: The GPS coordinates that we are using for Noeton have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for NoetonNoeton is located in Grainger CountyMarshalls Ferry(3 miles [4.8 km] to the southwest)
 
Note: The GPS coordinates that we are using for Marshalls Ferry have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for Marshalls FerryMarshalls Ferry is located in Grainger CountyBright ‑ Historic(3 miles [4.8 km] to the southeast)
 
Note: The GPS coordinates that we are using for Bright have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for BrightBright is located in Hamblen CountyEstimated population in 2014: 2,942 peopleMooresburg(3 miles [4.8 km] to the northeast)
Tate Springs(3 miles [4.8 km] to the west)
 
Note: The GPS coordinates that we are using for Tate Springs have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for Tate SpringsTate Springs is located in Grainger CountyRussellville(6 miles [9.7 km] to the southeast)
 
Note: The GPS coordinates that we are using for Russellville have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for RussellvilleRussellville is located in Hamblen CountyJump to TripAdvisor's Tourism page for Russellville <2>Galbraith Springs(6 miles [9.7 km] to the northeast)
 
Note: We haven't been able to verify our GPS coordinates for Galbraith Springs.  Although the coordinates have been estimated, they should be in the vicinity.<4>Jump to our Gazetteer entry for Galbraith SpringsGalbraith Springs is located in Hawkins CountyMorristown(7 miles [11.3 km] to the south)
 
Note: The GPS coordinates that we are using for Morristown have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for MorristownMorristown is located in Hamblen CountyPopulation from the 2020 Census: 30,275 peopleJump to TripAdvisor's Tourism page for Morristown <2>Thorn Hill(7 miles [11.3 km] to the west)
 
Jump to our Gazetteer entry for Thorn HillThorn Hill is located in Grainger CountyTurley Mills ‑ Historic(8 miles [12.9 km] to the southwest)
 
Note: The GPS coordinates that we are using for Turley Mills have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for Turley MillsTurley Mills is located in Grainger CountyWhitesburg(8 miles [12.9 km] to the southeast)
Bowen(8 miles [12.9 km] to the west)
 
Note: We haven't been able to verify our GPS coordinates for Bowen.  Although the coordinates have been estimated, they should be in the vicinity.<4>Jump to our Gazetteer entry for BowenBowen is located in Grainger CountySpringvale(9 miles [14.5 km] to the southeast)
 
Note: The GPS coordinates that we are using for Springvale have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for SpringvaleSpringvale is located in Hamblen CountyLuther(9 miles [14.5 km] to the north)
 
Note: The GPS coordinates that we are using for Luther have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for LutherLuther is located in Hancock CountySaint Clair(10 miles [16.1 km] to the east)
 
Note: The GPS coordinates that we are using for Saint Clair have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for Saint ClairSaint Clair is located in Hawkins CountyXenophon(11 miles [17.7 km] to the north)
 
Note: The GPS coordinates that we are using for Xenophon have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for XenophonXenophon is located in Hancock CountyAlpha(11 miles [17.7 km] to the southwest)
 
Note: The GPS coordinates that we are using for Alpha have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for AlphaAlpha is located in Hamblen CountyWitt(11 miles [17.7 km] to the south)
 
Note: The GPS coordinates that we are using for Witt have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for WittWitt is located in Hamblen CountyChoptack(11 miles [17.7 km] to the northeast)
 
Note: The GPS coordinates that we are using for Choptack have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for ChoptackChoptack is located in Hawkins CountyMay Springs ‑ Historic(12 miles [19.3 km] to the southwest)
 
Note: The GPS coordinates that we are using for May Springs have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for May SpringsMay Springs is located in Grainger CountyBulls Gap(12 miles [19.3 km] to the east)
 
Note: The GPS coordinates that we are using for Bulls Gap have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for Bulls GapBulls Gap is located in Hawkins CountyPopulation from the 2020 Census: 717 peopleJump to TripAdvisor's Tourism page for Bulls Gap <2>White Horn(12 miles [19.3 km] to the east)
 
Note: The GPS coordinates that we are using for White Horn have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for White HornWhite Horn is located in Hawkins CountyLee Valley(12 miles [19.3 km] to the northeast)
 
Note: The GPS coordinates that we are using for Lee Valley have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for Lee ValleyLee Valley is located in Hawkins CountyRutledge(13 miles [20.9 km] to the west)
Talbott(13 miles [20.9 km] to the southwest)
Yellow Springs(13 miles [20.9 km] to the northwest)
 
Note: The GPS coordinates that we are using for Yellow Springs have been provided by the GNIS.<3>  The coordinates still need to be verified.Jump to our Gazetteer entry for Yellow SpringsYellow Springs is located in Claiborne County 
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists.  However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now.  Unfortunately our sources of data have proven to be unreliable.  If you can provide us with more specific information about Wyatt Village, please let us know so that we can improve our accuracy. |  | <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |  | <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS).  While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |  | <4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates.  That said, we have some confidence that we have placed the marker near the actual location.  A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |  |  |