Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that in 1895, Vannatta had a post office and no railroad service. In 2014, Vannatta had a population of 398 people.
The following communities are listed based on their distance from Vannatta, with the one closest to Vannatta listed first.
- Midland
(3 miles [4.8 km] to the north)
- Midland is located in Rutherford County
- Jump to our Gazetteer entry for Midland
- Longview
(3 miles [4.8 km] to the northwest)
- Longview is located in Bedford County
- Jump to our Gazetteer entry for Longview
- Fall Creek
(4 miles [6.4 km] to the southwest)
- Fall Creek is located in Bedford County
- Jump to our Gazetteer entry for Fall Creek
- Fosterville
(5 miles [8 km] to the northeast)
- Fosterville is located in Rutherford County
- Jump to our Gazetteer entry for Fosterville
- Poplins Crossroads
(6 miles [9.7 km] to the southwest)
- Poplins Crossroads is located in Bedford County
- Jump to our Gazetteer entry for Poplins Crossroads
- Unionville
(6 miles [9.7 km] to the west)
- Link
(7 miles [11.3 km] to the north)
- Link is located in Rutherford County
- Jump to our Gazetteer entry for Link
- Bell Buckle
(7 miles [11.3 km] to the east)
- Rover
(7 miles [11.3 km] to the northwest)
- Rover is located in Bedford County
- Jump to our Gazetteer entry for Rover
- Shelbyville
(8 miles [12.9 km] to the south)
- Versailles
(8 miles [12.9 km] to the northwest)
- Versailles is located in Rutherford County
- Jump to our Gazetteer entry for Versailles
- Crescent
(9 miles [14.5 km] to the north)
- Crescent is located in Rutherford County
- Jump to our Gazetteer entry for Crescent
- Rockvale
(10 miles [16.1 km] to the north)
- Wartrace
(10 miles [16.1 km] to the southeast)
- Rucker
(10 miles [16.1 km] to the northeast)
- Rucker is located in Rutherford County
- Jump to our Gazetteer entry for Rucker
- Beasley
(10 miles [16.1 km] to the northwest)
- Beasley is located in Marshall County
- Jump to our Gazetteer entry for Beasley
- Bedford
(11 miles [17.7 km] to the southwest)
- Bedford is located in Bedford County
- Jump to our Gazetteer entry for Bedford
- Fairfield
(11 miles [17.7 km] to the east)
- Fairfield is located in Bedford County
- Jump to our Gazetteer entry for Fairfield
- Chapel Hill
(11 miles [17.7 km] to the west)
- Rich Creek
(12 miles [19.3 km] to the west)
- Rich Creek is located in Marshall County
- Jump to our Gazetteer entry for Rich Creek
- Wheel
(12 miles [19.3 km] to the southwest)
- Wheel is located in Bedford County
- Jump to our Gazetteer entry for Wheel
- Eagleville
(12 miles [19.3 km] to the northwest)
- Holts Corner
(12 miles [19.3 km] to the northwest)
- Holts Corner is located in Marshall County
- Jump to our Gazetteer entry for Holts Corner
- Palmetto
(13 miles [20.9 km] to the southwest)
- Palmetto is located in Bedford County
- Jump to our Gazetteer entry for Palmetto
- Estimated population in 2014: 661 people
- Haley
(13 miles [20.9 km] to the southeast)
- Haley is located in Bedford County
- Jump to our Gazetteer entry for Haley
- Beechgrove
(13 miles [20.9 km] to the east)
- Overall
(13 miles [20.9 km] to the north)
- Overall is located in Rutherford County
- Jump to our Gazetteer entry for Overall
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Vannatta, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |