|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that in 1895, Rose Creek had a post office and no railroad service.
The following communities are listed based on their distance from Rose Creek, with the one closest to Rose Creek listed first.
- Bethel Springs
(5 miles [8 km] to the east)
- Note: The GPS coordinates that we are using for Bethel Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bethel Springs
- Bethel Springs is located in McNairy County
- Population from the 2020 Census: 727 people
- Jump to TripAdvisor's Tourism page for Bethel Springs <3>
- Masseyville
(5 miles [8 km] to the north)
- Falcon
(6 miles [9.7 km] to the southeast)
- Selmer
(6 miles [9.7 km] to the east)
- Note: The GPS coordinates that we are using for Selmer have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Selmer
- Selmer is located in McNairy County
- Population from the 2020 Census: 4,280 people
- Jump to TripAdvisor's Tourism page for Selmer <3>
- McNairy
(8 miles [12.9 km] to the northeast)
- Note: The GPS coordinates that we are using for McNairy have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McNairy
- McNairy is located in McNairy County
- Pine Top
(8 miles [12.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Pine Top have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pine Top
- Pine Top is located in Hardeman County
- Purdy
(9 miles [14.5 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Purdy. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Purdy
- Purdy is located in McNairy County
- Google driving directions:
- From your current location to Purdy
- From Rose Creek to Purdy
- Ramer
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Ramer have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ramer
- Ramer is located in McNairy County
- Population from the 2020 Census: 293 people
- Jump to TripAdvisor's Tourism page for Ramer <3>
- Pocahontas
(12 miles [19.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Pocahontas have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pocahontas
- Pocahontas is located in Hardeman County
- Jump to TripAdvisor's Tourism page for Pocahontas <3>
- Gravel Hill
(12 miles [19.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Gravel Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gravel Hill
- Gravel Hill is located in McNairy County
- Montezuma
(12 miles [19.3 km] to the north)
- Chewalla
(13 miles [20.9 km] to the south)
- Middleton
(14 miles [22.5 km] to the southwest)
- Essary Springs
(14 miles [22.5 km] to the south)
- Guys
(14 miles [22.5 km] to the southeast)
- Cuba
(15 miles [24.1 km] to the south)
- Note: The GPS coordinates that we are using for Cuba have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cuba
- Cuba is located in Alcorn County (MS)
- Caffey
(15 miles [24.1 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Caffey. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Caffey
- Caffey is located in McNairy County
- Google driving directions:
- From your current location to Caffey
- From Rose Creek to Caffey
- Deanburg
(15 miles [24.1 km] to the northwest)
- Stantonville
(15 miles [24.1 km] to the east)
- Shandy
(15 miles [24.1 km] to the west)
- Wenasoga
(16 miles [25.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Wenasoga have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wenasoga
- Wenasoga is located in Alcorn County (MS)
- Henderson
(16 miles [25.7 km] to the north)
- Bolivar
(16 miles [25.7 km] to the west)
- Adamsville
(17 miles [27.4 km] to the east)
- Sweet Lips
(17 miles [27.4 km] to the northeast)
- Toone
(17 miles [27.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Toone have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Toone
- Toone is located in Hardeman County
- Population from the 2020 Census: 336 people
Off-the-Road Links ...
The official website for State of Tennessee: https://www.tn.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Rose Creek, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|