|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Pine Grove in the Atlas, the following communities of the 1890's would have been found near the current location of Pine Grove. The following communities are listed based on their distance, with the one closest to Pine Grove listed first.
- Jearoldstown
(Less than 2 miles to the east)
- Jump to our Gazetteer entry for Jearoldstown
- Jearoldstown is located in Greene County
- Swanay ‑ Historic
(2 miles [3.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Swanay have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Swanay
- Swanay is located in Greene County
- Maltsberger ‑ Historic
(3 miles [4.8 km] to the south)
- Note: The GPS coordinates that we are using for Maltsberger have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Maltsberger
- Maltsberger is located in Greene County
- Chimneytop ‑ Historic
(3 miles [4.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Chimneytop have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chimneytop
- Chimneytop is located in Hawkins County
- Cedar Lane
(4 miles [6.4 km] to the east)
- Note: The GPS coordinates that we are using for Cedar Lane have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cedar Lane
- Cedar Lane is located in Greene County
- Van Hill
(4 miles [6.4 km] to the west)
- Note: The GPS coordinates that we are using for Van Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Van Hill
- Van Hill is located in Hawkins County
- Locust Springs
(5 miles [8 km] to the southwest)
- Note: The GPS coordinates that we are using for Locust Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Locust Springs
- Locust Springs is located in Greene County
- Lovelace
(5 miles [8 km] to the northeast)
- Note: The GPS coordinates that we are using for Lovelace have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lovelace
- Lovelace is located in Greene County
- Newmansville
(6 miles [9.7 km] to the south)
- Note: The GPS coordinates that we are using for Newmansville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Newmansville
- Newmansville is located in Greene County
- Milburnton
(6 miles [9.7 km] to the southeast)
- Jump to our Gazetteer entry for Milburnton
- Milburnton is located in Greene County
- Blossom
(6 miles [9.7 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Blossom. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Blossom
- Blossom is located in Hawkins County
- New Hope
(6 miles [9.7 km] to the west)
- Note: The GPS coordinates that we are using for New Hope have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Hope
- New Hope is located in Hawkins County
- Christie ‑ Historic
(7 miles [11.3 km] to the east)
- Note: The GPS coordinates that we are using for Christie have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Christie
- Christie is located in Washington County
- Fall Branch
(7 miles [11.3 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Fall Branch. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Fall Branch
- Fall Branch is located in Washington County
- Population from the 2010 Census: 1,291 people
- Jump to TripAdvisor's Tourism page for Fall Branch <4>
- Mole
(7 miles [11.3 km] to the north)
- Note: The GPS coordinates that we are using for Mole have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mole
- Mole is located in Hawkins County
- Upchurch
(8 miles [12.9 km] to the south)
- Note: The GPS coordinates that we are using for Upchurch have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Upchurch
- Upchurch is located in Greene County
- Statemount ‑ Historic
(8 miles [12.9 km] to the south)
- Note: The GPS coordinates that we are using for Statemount have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Statemount
- Statemount is located in Greene County
- Locust Mount
(8 miles [12.9 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Locust Mount. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Locust Mount
- Locust Mount is located in Washington County
- Harbour
(8 miles [12.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Harbour have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Harbour
- Harbour is located in Sullivan County
- Ottway
(9 miles [14.5 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Ottway. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Ottway
- Ottway is located in Greene County
- Rheatown
(9 miles [14.5 km] to the south)
- Jump to our Gazetteer entry for Rheatown
- Rheatown is located in Greene County
- Mill Brook
(9 miles [14.5 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Mill Brook. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Mill Brook
- Mill Brook is located in Washington County
- Harmony
(9 miles [14.5 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Harmony. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Harmony
- Harmony is located in Washington County
- Stony Point
(9 miles [14.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Stony Point have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stony Point
- Stony Point is located in Hawkins County
- Surgoinsville
(9 miles [14.5 km] to the northwest)
Off-the-Road Links ...
The official website for State of Tennessee: https://www.tn.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Pine Grove, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|